Reza Younesi
Senior Lecturer/Associate Professor at Department of Chemistry - Ångström Laboratory; Structural Chemistry
- Telephone:
- +46 18 471 37 38
- E-mail:
- reza.younesi@kemi.uu.se
- Visiting address:
- Lägerhyddsvägen 1
- Postal address:
- Box 538
751 21 Uppsala
- ORCID:
- 0000-0003-2538-8104
More information is available to staff who log in.
Short presentation
full list of publications at Google Scholar
Keywords
- batteries
- electrochemical systems
- energy storage
- lithium batteries
- metal-air batteries
- photoelectron spectroscopy
- sodium batteries
- xps
Publications
Selection of publications
- A Halogen‐Free and Flame‐Retardant Sodium Electrolyte Compatible with Hard Carbon Anodes (2021)
- Non-flammable liquid electrolytes for safe batteries (2021)
- Strategies for Mitigating Dissolution of Solid Electrolyte Interphases in Sodium-Ion Batteries (2021)
- An Attempt to Formulate Non-Carbonate Electrolytes for Sodium-Ion Batteries (2021)
- Sodium bis(oxalato)borate (NaBOB) in trimethyl phosphate (2020)
- On the Stability of NaO2 in Na–O2 Batteries (2018)
- Growth of NaO2 in Highly Efficient Na–O2 Batteries Revealed by Synchrotron In Operando X-ray Diffraction (2017)
- Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries (2016)
Recent publications
- Facile one-step fabrication of Li4Ti5O12 coatings by suspension plasma spraying (2025)
- Importance of First Cycle Conditions on the Electrochemical Performance of Hard Carbon and Prussian White Based Sodium-Ion Batteries Using Fire Resistant, Fluorine-Free Electrolyte (2024)
- Anodic dissolution of aluminum in non-aqueous electrolyte solutions for sodium-ion batteries (2024)
- Ion-pairing: A Bygone Treatment of Electrolyte Solutions? (2024)
- Revisiting Amides as Cosolvents for Flame Resistant Sodium Bis(oxalato)borate in Triethyl Phosphate Electrolyte (2024)
All publications
Articles
- Facile one-step fabrication of Li4Ti5O12 coatings by suspension plasma spraying (2025)
- Importance of First Cycle Conditions on the Electrochemical Performance of Hard Carbon and Prussian White Based Sodium-Ion Batteries Using Fire Resistant, Fluorine-Free Electrolyte (2024)
- Anodic dissolution of aluminum in non-aqueous electrolyte solutions for sodium-ion batteries (2024)
- Ion-pairing: A Bygone Treatment of Electrolyte Solutions? (2024)
- Revisiting Amides as Cosolvents for Flame Resistant Sodium Bis(oxalato)borate in Triethyl Phosphate Electrolyte (2024)
- Upcycling of lithium cobalt oxide to LiNi1/3Mn1/3Co1/3O2 (2024)
- Fundamental Understanding and Quantification of Capacity Losses Involving the Negative Electrode in Sodium-Ion Batteries (2024)
- Limitations of polyacrylic acid binders when employed in thick LNMO Li-ion battery electrodes (2024)
- An industrial perspective on the future of sustainable batteries (2024)
- Unravelling the origin of capacity fade in Prussian white hard carbon full cells through operando X-ray diffraction (2024)
- Bio-based anode material production for lithium–ion batteries through catalytic graphitization of biochar (2024)
- Synthesis and characterization of a crystalline Na4Fe3(PO4)2(P2O7) cathode material for sodium-ion batteries (2024)
- The Solvation Structure of Localized High Concentration Electrolytes (2024)
- Carbon-negative valorization of biomass waste into affordable green hydrogen and battery anodes (2024)
- Determining internal porosity in Prussian blue analogue cathode materials using positron annihilation lifetime spectroscopy (2023)
- Development of P2 or P2/P3 cathode materials for sodium-ion batteries by controlling the Ni and Mn contents in Na0.7CoxMnyNizO2 layered oxide (2023)
- Fiber Optical Detection of Lithium Plating at Graphite Anodes (2023)
- Tris(trimethylsilyl) Phosphite and Lithium Difluoro(oxalato)borate as Electrolyte Additives for LiNi0.5Mn1.5O4-Graphite Lithium-Ion Batteries (2023)
- From Waste Biomass to Hard Carbon Anodes (2023)
- Antisolvent crystallization from deep eutectic solvent leachates of LiNi1/ 3Mn1/3Co1/3O2 for recycling and direct synthesis of battery cathodes (2023)
- The role of anionic processes in Li1−xNi0.44Mn1.56O4 studied by resonant inelastic X-ray scattering (2023)
- Assessing Coulombic Efficiency in Lithium Metal Anodes (2023)
- Study of the Electrochemical and Self-healing Processes of Galinstan as an Anode Material for Li-ion Batteries (2023)
- Interphase Engineering of LiNi0.88Mn0.06Co0.06O2 Cathodes Using Octadecyl Phosphonic Acid Coupling Agents (2023)
- Understanding the Electrochemical and Interfacial Behavior of Sulfolane based Electrolyte in LiNi0.5Mn1.5O4‐Graphite Full‐Cells (2023)
- The role of ethylene carbonate (EC) and tetramethylene sulfone (SL) in the dissolution of transition metals from lithium-ion cathodes (2023)
- A comparative analysis of the influence of hydrofluoroethers as diluents on solvation structure and electrochemical performance in non-flammable electrolytes (2023)
- Concentrated LiFSI-Ethylene Carbonate Electrolytes and Their Compatibility with High-Capacity and High-Voltage Electrodes (2022)
- Bio-derived hard carbon nanosheets with high rate sodium-ion storage characteristics (2022)
- On the compatibility of high mass loading bismuth anodes for full-cell sodium-ion batteries (2022)
- Driving the sodium-oxygen battery chemistry towards the efficient formation of discharge products (2022)
- Anionic Redox and Electrochemical Kinetics of the Na2Mn3O7 Cathode Material for Sodium-Ion Batteries (2022)
- Fiber Optic Sensors for Detection of Sodium Plating in Sodium-Ion Batteries (2022)
- Fluorine-Free Electrolytes for Lithium and Sodium Batteries (2022)
- Importance of Superstructure in Stabilizing Oxygen Redox in P3-Na0.67Li0.2Mn0.8O2 (2022)
- Electrochemical Sodiation and Desodiation of Gallium (2022)
- Effect of Ti-Substitution on the Properties of P3 Structure Na2/3Mn0.8Li0.2O2 Showing a Ribbon Superlattice (2022)
- Understanding the Capacity Fade in Polyacrylonitrile Binder-based LiNi0.5Mn1.5O4 Cells (2022)
- Towards understanding the nucleation and growth mechanism of Li dendrites on zinc oxide-coated nickel electrodes (2022)
- Measuring the Nucleation Overpotential in Lithium Metal Batteries (2022)
- Recycling of Lithium-Ion Batteries-Current State of the Art, Circular Economy, and Next Generation Recycling (2022)
- Investigation of Water-Soluble Binders for LiNi0.5Mn1.5O4-Based Full Cells (2022)
- Systematic Studies on Liquid Sodium 4,5-dicyano-2-(trifluoromethyl)imidazolate (NaTDI)-Based Electrolytes and Its Impact on the Cycling Behaviour Against Wet Impregnated WI-NaNMC and Prussian White Cathodes (2022)
- Dissecting the solid polymer electrolyte–electrode interface in the vicinity of electrochemical stability limits (2022)
- Investigation of the Effect of Lithium Difluoro Phosphate Electrolyte Additive on Transition Metal Dissolution from High Voltage Cathodes (2022)
- The Role of EC and Sulfolane on the Dissolution of Transition Metals from Lithium-Ion Cathodes (2022)
- Influence of Al2O3 Coatings on HF Induced Transition Metal Dissolution from Lithium-Ion Cathodes (2022)
- Optimization of Sodium Bis(oxalato)borate (NaBOB) in Triethyl Phosphate (TEP) by Electrolyte Additives (2022)
- A Halogen‐Free and Flame‐Retardant Sodium Electrolyte Compatible with Hard Carbon Anodes (2021)
- A Lignosulfonate Binder for Hard Carbon Anodes in Sodium-Ion Batteries (2021)
- Non-flammable liquid electrolytes for safe batteries (2021)
- Prospects for Improved Magnesocene-Based Magnesium Battery Electrolytes (2021)
- Capacity losses due to solid electrolyte interphase formation and sodium diffusion in sodium-ion batteries (2021)
- Strategies for Mitigating Dissolution of Solid Electrolyte Interphases in Sodium-Ion Batteries (2021)
- Na-ion mobility in P2-Na0.5MgxNi0.17-xMn0.83O2 (0 <= x <= 0.07) from electrochemical and muon spin relaxation studies (2021)
- A Wide-Temperature-Range, Low-Cost, Fluorine-Free Battery Electrolyte Based On Sodium Bis(Oxalate)Borate (2021)
- An Attempt to Formulate Non-Carbonate Electrolytes for Sodium-Ion Batteries (2021)
- High Voltage Redox-Meditated Flow Batteries with Prussian Blue Solid Booster (2021)
- A comparison of high voltage outgassing of LiCoO2, LiNiO2, and Li2MnO3 layered Li-ion cathode materials (2021)
- 2021 roadmap for sodium-ion batteries (2021)
- Revealing capacity fading in Sb-based anodes using symmetric sodium-ion cells (2021)
- On the Manganese Dissolution Process from LiMn2O4 Cathode Materials (2021)
- How Mn/Ni Ordering Controls Electrochemical Performance in High-Voltage Spinel LiNi0.44Mn1.56O4 with Fixed Oxygen Content (2020)
- Facile synthesis of hard carbon microspheres from polyphenols for sodium-ion batteries (2020)
- Sulfolane-Based Ethylene Carbonate-Free Electrolytes for LiNi0.6Mn0.2Co0.2O2-Li4Ti5O12 Batteries (2020)
- Acetonitrile-Based Electrolytes for Rechargeable Zinc Batteries (2020)
- Understanding the redox process upon electrochemical cycling of the P2-Na0.78Co1/2Mn1/3Ni1/6O2 electrode material for sodium-ion batteries (2020)
- Oxygen Redox Activity through a Reductive Coupling Mechanism in the P3-Type Nickel-Doped Sodium Manganese Oxide (2020)
- Vacancy-Enhanced Oxygen Redox Reversibility in P3-Type Magnesium-Doped Sodium Manganese Oxide Na0.67Mg0.2Mn0.8O2 (2020)
- Understanding the Roles of Tris(trimethylsilyl) Phosphite (TMSPi) in LiNi0.8Mn0.1Co0.1O2 (NMC811)/Silicon-Graphite (Si-Gr) Lithium-Ion Batteries (2020)
- Sodium bis(oxalato)borate (NaBOB) in trimethyl phosphate (2020)
- Investigation of dimethyl carbonate and propylene carbonate mixtures for LiNi0.6Mn0.2Co0.2O2-Li4Ti5O12 cells (2019)
- Temperature dependence of electrochemical degradation in LiNi1/3Mn1/3Co1/3O2/Li4Ti5O12 cells (2019)
- Selective Control of Composition in Prussian White for Enhanced Material Properties (2019)
- Analysis of the Solid Electrolyte Interphase on Hard Carbon Electrodes in Sodium-Ion Batteries (2019)
- Unlocking high capacities of graphite anodes for potassium-ion batteries (2019)
- Insights into the Li-Metal/Organic Carbonate Interfacial Chemistry by Combined First-Principles Theory and X-ray Photoelectron Spectroscopy (2019)
- V2O5·nH2O nanosheets and multi-walled carbon nanotube composite as a negative electrode for sodium-ion batteries (2019)
- On the Capacity Losses Seen for Optimized Nano-Si Composite Electrodes in Li-Metal Half-Cells (2019)
- Understanding charge compensation mechanisms in Na0.56Mg0.04Ni0.19Mn0.70O2 (2019)
- Excess lithium in transition metal layers of epitaxially grown thin film cathodes of Li2MnO3 leads to rapid loss of covalency during first battery cycle (2019)
- Interfacial Reaction Mechanisms on Graphite Anodes for K-Ion Batteries (2019)
- Depth-dependent oxygen redox activity in lithium-rich layered oxide cathodes (2019)
- Towards room temperature operation of all-solid-state Na-ion batteries through polyester-polycarbonate-based polymer electrolytes (2019)
- Understanding the Capacity Loss in LiNi0.5Mn1.5O4-Li4Ti5O12 Lithium-Ion Cells at Ambient and Elevated Temperatures (2018)
- Influence of state-of-charge in commercial LiNi0.33Mn0.33Co0.33O2/LiMn2O4-graphite cells analyzed by synchrotron-based photoelectron spectroscopy (2018)
- State of the art knowledge about interfaces and interphases in lithium and sodium batteries (2018)
- Unravelling in-situ formation of highly active mixed metal oxide CuInO2 nanoparticles during CO2 electroreduction (2018)
- On the Stability of NaO2 in Na–O2 Batteries (2018)
- A free standing Ru–TiC nanowire array/carbon textile cathode with enhanced stability for Li–O2 batteries (2018)
- Capacity fading mechanism of tin phosphide anodes in sodium-ion batteries (2018)
- Critical evaluation of the stability of highly concentrated LiTFSI - Acetonitrile electrolytes vs. graphite, lithium metal and LiFePO4 electrodes (2018)
- Complementary analyses of aging in a commercial LiFePO4/graphite 26650 cell (2018)
- The Effect of the Fluoroethylene Carbonate Additive in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells (2017)
- How the Negative Electrode Influences Interfacial and Electrochemical Properties of LiNi1/3Co1/3Mn1/3O2 Cathodes in Li-Ion Batteries (2017)
- A Water Based Synthesis of Ultrathin Hydrated Vanadium Pentoxide Nanosheets for Lithium Battery Application (2017)
- Towards an Understanding of Li2O2 Evolution in Li-O2 Batteries (2017)
- Growth of NaO2 in Highly Efficient Na–O2 Batteries Revealed by Synchrotron In Operando X-ray Diffraction (2017)
- Evolution of the solid electrolyte interphase on tin phosphide anodes in sodium ion batteries probed by hard x-ray photoelectron spectroscopy (2017)
- Different Shades of Li4Ti5O12 Composites (2017)
- Electrochemical performance and interfacial properties of Li-metal in lithium bis(fluorosulfonyl)imide based electrolytes (2017)
- Boosting the thermal stability of emulsion–templated polymers via sulfonation (2016)
- SEI Formation and Interfacial Stability of a Si Electrode in a LiTDI-Salt Based Electrolyte with FEC and VC Additives for Li-Ion Batteries (2016)
- 3-D binder-free graphene foam as cathode for high capacity Li-O2 batteries (2016)
- Constraining Si Particles within Graphene Foam Monolith (2016)
- Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries (2016)
- Manganese in the SEI layer of Li4Ti5O12 studied using combined NEXAFS and HAXPES techniques (2016)
- Manganese in the SEI Layer of Li4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques (2016)
- Manganese in the SEI Layer of Li 4Ti5O12 Studied by Combined NEXAFS and HAXPES Techniques (2016)
- In Situ Analysis of the Li-O-2 Battery with Thermally Reduced Graphene Oxide Cathode (2016)
- The Origin of Li-O2 Battery Performance Enhancement Using Fluorocarbon Additive (2016)
- Plasma properties during magnetron sputtering of lithium phosphorous oxynitride thin films (2015)
- Instability of Ionic Liquid-Based Electrolytes in Li-O-2 Batteries (2015)
- Iron Doping in Spinel NiMn2O4 (2015)
- Depth profiling the solid electrolyte interpahase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy (2015)
- Depth profiling the solid electrolyte interphase on lithium titanate (Li4Ti5O12) using synchrotron-based photoelectron spectroscopy (2015)
- Capillary based Li-air batteries for in situ synchrotron X-ray powder diffraction studies (2015)
- Reduced graphene oxide for Li-air batteries (2015)
- A gamma fluorinated ether as an additive for enhanced oxygen activity in Li-O-2 batteries (2015)
- Analysis of the Interphase on Carbon Black Formed in High Voltage Batteries (2015)
- Lithium salts for advanced lithium batteries: Li-metal, Li-O2, and Li-S (2015)
- WO3 nano-ribbons: their phase transformation from tungstite (WO3·H2O) to tungsten oxide (WO3) (2014)
- Synthesis of tungsten oxide nanoparticles using a hydrothermal method at ambient pressure (2014)
- Nickel oxide crystalline nano flakes: synthesis, characterization and their use as anode in lithium-ion batteries (2014)
- Nanosized LiFePO4-decorated emulsion-templated carbon foam for 3D micro batteries (2014)
- Photocatalytic and antibacterial properties of Au-decorated Fe3O4@mTiO(2) core-shell microspheres (2014)
- Pt/α-MnO2 nanotube (2014)
- Communication: The influence of CO2 poisoning on overvoltages and discharge capacity in non-aqueous Li-Air batteries (2014)
- Increased Cycling Efficiency of Lithium Anodes in Dimethyl Sulfoxide Electrolytes For Use in Li-O-2 Batteries (2014)
- Ionic conductivity and the formation of cubic CaH2 in the LiBH4–Ca(BH4)2 composite (2014)
- Batteries: An Important Piece in the Puzzle of Renewable Energies for a Better World (2014)
- Influence of annealing temperature on the electrochemical and surface properties of the 5-V spinel cathode material LiCr0.2Ni0.4Mn1.4O4 synthesized by a sol–gel technique (2014)
- A New Look at the Stability of Dimethyl Sulfoxide and Acetonitrile in Li-O2 Batteries (2014)
- Emulsion-templated bicontinuous carbon network electrodes for use in 3D microstructured batteries (2013)
- Accelerated Electrochemical Decomposition of Li2O2 under X-ray Illumination (2013)
- Understanding and Controlling the Surface Chemistry of LiFeSO4F for an Enhanced Cathode Functionality (2013)
- Li-O2 Battery Degradation by Lithium Peroxide (Li2O2) (2013)
- Surface Characterization of the Carbon Cathode and the Lithium Anode of Li-O2 Batteries using LiClO4 or LiBOB salts (2013)
- The SEI Layer Formed on Lithium Metal in the Presence of Oxygen (2013)
- Ether Based Electrolyte, LiB(CN)4 Salt and Binder Degradation in the Li-O2 Battery Studied by Hard X-ray Photoelectron Spectroscopy (HAXPES) (2012)
- The Cathode Surface Composition of a Cycled Li–O2 Battery (2012)
- Influence of the Cathode Porosity on the Discharge Performance of the Lithium-Oxygen Battery (2011)
- The Effect of Pore Size on the Performance of the Li-O2 Battery (2010)
- Corrosion properties of electrodeposited nanocrystalline and amorphous patterned Ni–W alloy (2009)
- A New Class of Labile Surfactants that Break Down to Non-surface Active Products upon Heating or after a Pre-set Time, without the Need for a pH Change (2007)
- Kinetic mechanisms of cementation of cadmium ions by zinc powder from sulphate solutions (2006)
- Preparation and characterisation of ZnO/Fe2O3 core–shell nanorods
- Understanding the capacity loss in LNMO-LTO lithium-ion cells at ambient and elevated temperatures
- Fiber Optic Sensor for Detection of Sodium Plating in Sodium-ion Batteries
- Insights into the Stability of Discharge Products in Na-O2 Batteries
- Manganese dissolution and electrochemistry of alternative electrolytes
- Surface Layer Formation on Li4Ti5O12 Electrodes in Li-ion Cells with Propylene Carbonate-Based Electrolyte
- Investigation of Electrolyte Salts in Non-Flammable Triethyl Phosphate for Sodium-Ion Batteries
- Non-flammable ether and phosphate-based liquid electrolytes for sodium-ion batteries
Books
Chapters
Conferences
- P-doped Hard Carbon as Anode Material for Sodium-ion Batteries (2019)
- Graphite for K-ion Batteries: Stability and Formation of SEI layer (2018)
- Hard Carbon//Na3V2(PO4)3 Full Cell Battery Exhibiting Enhanced Performance (2018)
- In Pursuit of Optimal Precursors for Hard Carbon Anodes (2018)
- Oxygen redox activity in Na0.67Ni0.25Mg0.05Mn0.7O2 (2018)
- Solid Electrolyte Interphase (SEI) Formation in Sodium-Based Electrolytes (2018)
- Energy-tuned photoelectron spectroscopy of lithium-ion battery cathodes (2018)
- Polycarbonate/Polyester-Based Polymer Electrolyte Used in All-Solid-State Sodium-Ion Batteries – How are Cells Constructed? (2018)
- Polyester/polycarbonate-based polymer electrolyte for sodium ion battery applications (2018)
- Understanding the Capacity Loss in LiNi0.5Mn1.5O4 - Li4Ti5O12 Lithium-Ion Cells at Ambient and Elevated Temperatures (2017)
- The influence of counter electrode on the capacity fading in LiNi0.33Mn0.33Co0.33O2-based Li-ion battery cells (2017)
- The influence of counter electrode on the capacity fading in LiNi0.33Mn0.33Co0.33O2-based Li-ion battery cells (2017)
- The influence of temperature and SOC ranges of ageing in commercial LiNi0.33Mn0.33Co0.33O2/LiMn2O4-graphite commercial cells (2017)
- Graphite Anode in K-ion Battery: The Solid Electrolyte Interphase probed by Photoelectron Spectroscopy (2017)
- Sodium batteries and their interfaces (2017)
- Simple and Green Method for Fabricating V2O5·nH2O Nanosheets for Lithium Battery Application (2017)
- Simple and Green Method for Fabricating V2O5·nH2O Nanosheets for Lithium Battery Application (2017)
- Towards Beyond Li-Ion Battery Technologies (2017)
- The solid electrolyte interphase formation in Na+-based electrolytes (2017)
- The solid electrolyte interphase formation in Na+-based electrolytes (2017)
- The impact of cut-off voltage in tin-phosphide anodes for sodium-ion batteries (2017)
- Electrochemical stability and speciation of a magnesocene / THF electrolyte (2017)
- Variations in optimal salt content depending on polycaprolactone-polycarbonate composition in polymer electrolytes (2017)
- A Cheap and Sustainable Cathode Material for Sodium Ion Batteries (2017)
- Challenges in the Development of an Electrolyte Solution for the Li/air Battery (2013)
- Degradation Products on Li-Negative Electrode and the Carbon Cathode in Li-O2 Batteries (2012)
- The Role of Carbon in the Cathode of a Li-O2 Battery (2010)
- The Primary Nonaqueous Lithium-Air Battery (2009)
Patents
- Method of producing a sodium iron(II)-hexacyanoferrate(II) material (2018)
- Rapid activation of surfactant precursor (2009)
Other
- Towards an Understanding of Li2O2 Evolution in Li–O2Batteries: An In Operando Synchrotron X-ray DiffractionStudy (2017)
- Insights into the Stability of Discharge Products in Na-O2 Batteries (2017)
- Free Standing Ru-TiC Nanowire Array/Carbon Textile Cathode with Enhanced Stability for Li-O2 Batteries (2017)