Jannica Heinrichs Lindgren

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Part of Tribology International, 2026

• DOI for A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Download full text (pdf) of A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Jacobson, Staffan

Part of Wear, 2026

• DOI for Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations
• Download full text (pdf) of Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, 2025

• DOI for The influence of oxygen on the wear of WC-Co sliding against copper
• Download full text (pdf) of The influence of oxygen on the wear of WC-Co sliding against copper

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Part of Wear, 2024

• DOI for Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Download full text (pdf) of Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Holmgren, Jonna; Kassman Rudolphi, Åsa; Heinrichs Lindgren, Jannica

Part of Tribology International, 2024

• DOI for The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS
• Download full text (pdf) of The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Part of Tribology International, 2026

• DOI for A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Download full text (pdf) of A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Jacobson, Staffan

Part of Wear, 2026

• DOI for Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations
• Download full text (pdf) of Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, 2025

• DOI for The influence of oxygen on the wear of WC-Co sliding against copper
• Download full text (pdf) of The influence of oxygen on the wear of WC-Co sliding against copper

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Part of Wear, 2024

• DOI for Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Download full text (pdf) of Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Holmgren, Jonna; Kassman Rudolphi, Åsa; Heinrichs Lindgren, Jannica

Part of Tribology International, 2024

• DOI for The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS
• Download full text (pdf) of The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan et al.

Part of Wear, 2023

• DOI for Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide

Holmgren, Jonna; Heinrichs, Jannica; Kassman Rudolphi, Åsa; Jacobson, Staffan

Part of Journal of Applied Polymer Science, 2023

• DOI for Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide
• Download full text (pdf) of Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide

Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Larsson, Elin; Donzel-Gargand, Olivier; Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology International, 2022

• DOI for Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Tribological evaluation of a boric acid fuel additive in various engine fuels

Larsson, Elin; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 204381, 2022

• DOI for Tribological evaluation of a boric acid fuel additive in various engine fuels
• Download full text (pdf) of Tribological evaluation of a boric acid fuel additive in various engine fuels

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, H.; Wiklund, Urban; Kawamura, S. et al.

Part of Wear, 2022

• DOI for Wear of cemented carbide forging dies used in zipper production
• Download full text (pdf) of Wear of cemented carbide forging dies used in zipper production

On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Heldin, Magnus; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, 2021

• DOI for On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals
• Download full text (pdf) of On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, K. et al.

Part of Wear, 2021

• DOI for Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite
• Download full text (pdf) of Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2021

• DOI for Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper
• Download full text (pdf) of Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Olander, Petra; Heinrichs, Jannica

Part of Tribology - Materials, Surfaces & Interfaces, p. 181-192, 2021

• DOI for On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces
• Download full text (pdf) of On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2020

• DOI for Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Part of Wear, p. 1658-1666, 2019

• DOI for Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Part of International journal of refractory metals & hard materials, 2019

• DOI for Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

Part of Wear, p. 96-107, 2019

• DOI for Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology letters, 2018

• DOI for On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels
• Download full text (pdf) of On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Initial surface failure and wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Almqvist, Bjarne; Jacobson, Staffan

Part of Wear, p. 43-55, 2018

• DOI for Initial surface failure and wear of cemented carbides in sliding contact with different rock types

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Part of Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, p. 54-61, 2018

• DOI for Surface texturing to promote formation of protective tribofilms on combustion engine valves

On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 141-151, 2018

• DOI for On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

Roizard, X.; Heinrichs, Jannica; Buteri, A.; Jacobson, Staffan et al.

Part of Tribology International, p. 465-473, 2018

• DOI for Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 7-13, 2017

• DOI for Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 1429-1436, 2017

• DOI for Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Olsson, Mikael; Yvell, K.; Heinrichs, Jannica; Bengtsson, M. et al.

Part of Wear, p. 81-92, 2017

• DOI for Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Investigation of material transfer in sliding friction-topography or surface chemistry?

Westlund, Viktoria; Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Tribology International, p. 213-223, 2016

• DOI for Investigation of material transfer in sliding friction-topography or surface chemistry?
• Download full text (pdf) of Investigation of material transfer in sliding friction-topography or surface chemistry?

Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Roizard, X.; Heinrichs, Jannica; Taouil, A. Et; Jacobson, Staffan et al.

Part of Tribology International, p. 141-148, 2016

• DOI for Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, p. 104-113, 2015

• DOI for Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

Part of Wear, p. 210-221, 2015

• DOI for Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

Part of Journal of Materials Processing Technology, p. 1467-1481, 2014

• DOI for Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jenei, Istvan Zoltan; Jacobson, Staffan

Part of Wear, p. 87-94, 2014

• DOI for Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

Part of Tribology - Materials, Surfaces & Interfaces, p. 14-20, 2014

Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

Part of Tribology International, p. 55-64, 2013

• DOI for Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Heinrichs, Jannica; Olsson, M.; Jacobson, Staffan

Part of Wear, p. 1249-1256, 2013

• DOI for Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Tribology letters, p. 431-438, 2013

• DOI for Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

Part of Tribology International, p. 153-160, 2012

• DOI for Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Wear, p. 49-60, 2012

• DOI for Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Wear, p. 61-73, 2012

• DOI for New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

Mechanisms of transfer of aluminium to PVD-coated forming tools

Heinrichs, Jannica; Jacobson, Staffan

Part of Tribology letters, p. 299-312, 2012

• DOI for Mechanisms of transfer of aluminium to PVD-coated forming tools

Evaluation of TiB₂ coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Surface Engineering, p. 517-525, 2012

• DOI for Evaluation of TiB₂ coatings in cold forming of aluminium

Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

Part of Tribology International, p. 9-18, 2012

• DOI for Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 2517-2524, 2011

• DOI for The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 3606-3613, 2010

• DOI for Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Laboratory test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of Wear, p. 2278-2286, 2009

• DOI for Laboratory test simulation of galling in cold forming of aluminium

Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

Part of Trends in Biomaterials & Artificial Organs, p. 104-110, 2008

Hydroxylapatite growth on single-crystal rutile substrates

Lindberg, Fredrik; Heinrichs, Jannica; Ericson, Fredric; Thomsen, Peter et al.

Part of Biomaterials, p. 3317-3323, 2008

• DOI for Hydroxylapatite growth on single-crystal rutile substrates

On Transfer of Work Material to Tools

Heinrichs, Jannica

2012

• Download full text (pdf) of On Transfer of Work Material to Tools

The Effect of Oxygen on the Chemical Wear of Cemented Carbides in Sliding Contact Against Copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

2024

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Kawamura, Shingo et al.

2021

Cemented carbide wear initiation in sliding contact with iron ore

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Part of Proceedings of 2nd Sweden-China Symposium on Tribology, 2019

Initiation and propagation of tool wear in turning of titanium alloys –: evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Part of Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019

Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact

Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

Part of Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

2018

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

2016

Initial wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2016

INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

2015

Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2015

Soft rock scratches hard cemented carbide

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

2015

Deformation-activated work material transfer to DLC coatings

Heinrichs, Jannica; Gustavsson, Fredrik; Olsson, Mikael; Jacobson, Staffan

2014

Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling

Heinrichs, Jannica; Yvell, Karin; Olsson, Mikael; Jacobson, Staffan

2014

On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

2014

Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

2013

New experimental findings on the role of initial material transfer in determining friction and surface damage

Jacobson, Staffan; Heinrichs, Jannica; Olsson, Mikael

2013

Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2013

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

2013

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

2012

Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Part of Nordtrib, Trondheim, Norway, 2012, 2012

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Staffan, Jacobson

2011

Evaluation of TiB2 coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

2011

The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium

Heinrichs, Jannica; Jacobson, Staffan

2010

Influence from PVD coatings on galling tendency in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2010

Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

p. 87-92, 2009

Influence of aluminium pre-treatment on galling in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2009

In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Heinrichs, Jannica; Jarmar, Tobias; Rooth, Mårten; Engqvist, Håkan

Part of BIOCERAMICS, VOL 20, PTS 1 AND 2, p. 689-692, 2008

• DOI for In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Lab test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Part of NordTrib 2008, 2008