Jannica Heinrichs Lindgren

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Ingår i Tribology International, 2026

• DOI för A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Ladda ner fulltext (pdf) av A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Jacobson, Staffan

Ingår i Wear, 2026

• DOI för Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations
• Ladda ner fulltext (pdf) av Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, 2025

• DOI för The influence of oxygen on the wear of WC-Co sliding against copper
• Ladda ner fulltext (pdf) av The influence of oxygen on the wear of WC-Co sliding against copper

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Ingår i Wear, 2024

• DOI för Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Ladda ner fulltext (pdf) av Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Holmgren, Jonna; Kassman Rudolphi, Åsa; Heinrichs Lindgren, Jannica

Ingår i Tribology International, 2024

• DOI för The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS
• Ladda ner fulltext (pdf) av The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Ingår i Tribology International, 2026

• DOI för A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Ladda ner fulltext (pdf) av A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Jacobson, Staffan

Ingår i Wear, 2026

• DOI för Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations
• Ladda ner fulltext (pdf) av Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, 2025

• DOI för The influence of oxygen on the wear of WC-Co sliding against copper
• Ladda ner fulltext (pdf) av The influence of oxygen on the wear of WC-Co sliding against copper

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Ingår i Wear, 2024

• DOI för Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Ladda ner fulltext (pdf) av Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Holmgren, Jonna; Kassman Rudolphi, Åsa; Heinrichs Lindgren, Jannica

Ingår i Tribology International, 2024

• DOI för The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS
• Ladda ner fulltext (pdf) av The influence from PTFE on surface and sub-surface damages of glass fiber reinforced PPS

Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan et al.

Ingår i Wear, 2023

• DOI för Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide

Holmgren, Jonna; Heinrichs, Jannica; Kassman Rudolphi, Åsa; Jacobson, Staffan

Ingår i Journal of Applied Polymer Science, 2023

• DOI för Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide
• Ladda ner fulltext (pdf) av Strategies for revealing deformation and wear mechanisms of polymer composites by combining scanning electron microscopy, energy dispersive x‐ray spectroscopy and cross‐section techniques—Exemplified by glass fiber reinforced poly‐phenylene‐sulphide

Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Larsson, Elin; Donzel-Gargand, Olivier; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Tribology International, 2022

• DOI för Tribofilm formation of a boric acid fuel additive: material characterization; challenges and insights

Tribological evaluation of a boric acid fuel additive in various engine fuels

Larsson, Elin; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Wear, s. 204381, 2022

• DOI för Tribological evaluation of a boric acid fuel additive in various engine fuels
• Ladda ner fulltext (pdf) av Tribological evaluation of a boric acid fuel additive in various engine fuels

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, H.; Wiklund, Urban; Kawamura, S. et al.

Ingår i Wear, 2022

• DOI för Wear of cemented carbide forging dies used in zipper production
• Ladda ner fulltext (pdf) av Wear of cemented carbide forging dies used in zipper production

On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Heldin, Magnus; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Wear, 2021

• DOI för On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals
• Ladda ner fulltext (pdf) av On the critical roles of initial plastic deformation and material transfer on the sliding friction between metals

Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Yvell, K. et al.

Ingår i Wear, 2021

• DOI för Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite
• Ladda ner fulltext (pdf) av Influence of binder metal on wear initiation of cemented carbides in sliding contact with granite

Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Jacobson, Staffan

Ingår i Wear, 2021

• DOI för Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper
• Ladda ner fulltext (pdf) av Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Olander, Petra; Heinrichs, Jannica

Ingår i Tribology - Materials, Surfaces & Interfaces, s. 181-192, 2021

• DOI för On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces
• Ladda ner fulltext (pdf) av On wear of WC-Co cutting inserts in turning of Ti6Al4V – a study of wear surfaces

Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan

Ingår i Wear, 2020

• DOI för Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Ingår i Wear, s. 1658-1666, 2019

• DOI för Initiation and propagation of tool wear in turning of titanium alloys - Evaluated in successive sliding wear test

Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Ingår i International journal of refractory metals & hard materials, 2019

• DOI för Influence of cemented carbide binder type on wear initiation in rock drilling – investigated in sliding wear against magnetite rock

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

Ingår i Wear, s. 96-107, 2019

• DOI för Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Tribology letters, 2018

• DOI för On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels
• Ladda ner fulltext (pdf) av On the Role of Material Transfer in Friction Between Metals: Initial Phenomena and Effects of Roughness and Boundary Lubrication in Sliding Between Aluminium and Tool Steels

Initial surface failure and wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Almqvist, Bjarne; Jacobson, Staffan

Ingår i Wear, s. 43-55, 2018

• DOI för Initial surface failure and wear of cemented carbides in sliding contact with different rock types

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Proceedings of the Institution of mechanical engineers. Part J, journal of engineering tribology, s. 54-61, 2018

• DOI för Surface texturing to promote formation of protective tribofilms on combustion engine valves

On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, s. 141-151, 2018

• DOI för On the deformation mechanisms of cemented carbide in rock drilling: Fundamental studies involving sliding contact against a rock crystal tip

Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

Roizard, X.; Heinrichs, Jannica; Buteri, A.; Jacobson, Staffan et al.

Ingår i Tribology International, s. 465-473, 2018

• DOI för Friction behavior of ferritic stainless steel in a strongly diluted alcohol solution of alkylphosphonic acid

Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, s. 7-13, 2017

• DOI för Initial deformation and wear of cemented carbides in rock drilling as examined by a sliding wear test

Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

Ingår i Wear, s. 1429-1436, 2017

• DOI för Wear protective capacity of tribofilms formed on combustion engine valves with different surface textures

Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Olsson, Mikael; Yvell, K.; Heinrichs, Jannica; Bengtsson, M. et al.

Ingår i Wear, s. 81-92, 2017

• DOI för Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling

Investigation of material transfer in sliding friction-topography or surface chemistry?

Westlund, Viktoria; Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i Tribology International, s. 213-223, 2016

• DOI för Investigation of material transfer in sliding friction-topography or surface chemistry?
• Ladda ner fulltext (pdf) av Investigation of material transfer in sliding friction-topography or surface chemistry?

Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Roizard, X.; Heinrichs, Jannica; Taouil, A. Et; Jacobson, Staffan et al.

Ingår i Tribology International, s. 141-148, 2016

• DOI för Insights into sliding wear and friction behavior of copper in ethanol containing alkylphosphonic acid molecules

Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, s. 104-113, 2015

• DOI för Initial degradation of cemented carbides for rock drilling - Model studies of the tribological contact against rock

Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

Ingår i Wear, s. 210-221, 2015

• DOI för Surface degradation of cemented carbides in scratching contact with granite and diamond: the roles of microstructure and composition

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

Ingår i Journal of Materials Processing Technology, s. 1467-1481, 2014

• DOI för Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jenei, Istvan Zoltan; Jacobson, Staffan

Ingår i Wear, s. 87-94, 2014

• DOI för Transfer of titanium in sliding contacts: New discoveries and insights revealed by in situ studies in the SEM

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

Ingår i Tribology - Materials, Surfaces & Interfaces, s. 14-20, 2014

Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

Ingår i Tribology International, s. 55-64, 2013

• DOI för Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Heinrichs, Jannica; Olsson, M.; Jacobson, Staffan

Ingår i Wear, s. 1249-1256, 2013

• DOI för Influence of tool steel microstructure on initial material transfer in metal forming-In situ studies in the SEM

Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i Tribology letters, s. 431-438, 2013

• DOI för Initiation of Galling in Metal Forming: Differences Between Aluminium and Austenitic Stainless Steel Studied In Situ in the SEM

Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

Ingår i Tribology International, s. 153-160, 2012

• DOI för Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i Wear, s. 49-60, 2012

• DOI för Mechanisms of material transfer studied in situ in the SEM: Explanations to the success of DLC coated tools in aluminium forming

New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i Wear, s. 61-73, 2012

• DOI för New understanding of the initiation of material transfer and transfer layer build-up in metal forming: In situ studies in the SEM

Mechanisms of transfer of aluminium to PVD-coated forming tools

Heinrichs, Jannica; Jacobson, Staffan

Ingår i Tribology letters, s. 299-312, 2012

• DOI för Mechanisms of transfer of aluminium to PVD-coated forming tools

Evaluation of TiB₂ coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Ingår i Surface Engineering, s. 517-525, 2012

• DOI för Evaluation of TiB₂ coatings in cold forming of aluminium

Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

Ingår i Tribology International, s. 9-18, 2012

• DOI för Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Ingår i Wear, s. 2517-2524, 2011

• DOI för The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

Ingår i Surface & Coatings Technology, s. 3606-3613, 2010

• DOI för Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to galling

Laboratory test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Ingår i Wear, s. 2278-2286, 2009

• DOI för Laboratory test simulation of galling in cold forming of aluminium

Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

Ingår i Trends in Biomaterials & Artificial Organs, s. 104-110, 2008

Hydroxylapatite growth on single-crystal rutile substrates

Lindberg, Fredrik; Heinrichs, Jannica; Ericson, Fredric; Thomsen, Peter et al.

Ingår i Biomaterials, s. 3317-3323, 2008

• DOI för Hydroxylapatite growth on single-crystal rutile substrates

On Transfer of Work Material to Tools

Heinrichs, Jannica

2012

• Ladda ner fulltext (pdf) av On Transfer of Work Material to Tools

The Effect of Oxygen on the Chemical Wear of Cemented Carbides in Sliding Contact Against Copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

2024

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Kawamura, Shingo et al.

2021

Cemented carbide wear initiation in sliding contact with iron ore

Heinrichs, Jannica; Norgren, Susanne; Jacobson, Staffan; Olsson, Mikael

Ingår i Proceedings of 2nd Sweden-China Symposium on Tribology, 2019

Initiation and propagation of tool wear in turning of titanium alloys –: evaluated in successive sliding wear test

Olander, Petra; Heinrichs, Jannica

Ingår i Proceedings of Wear of Materials Conference, Miami, Florida, USA, 2019

Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact

Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

Ingår i Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

2018

Surface texturing to promote formation of protective tribofilms on combustion engine valves

Elo, Robin; Heinrichs, Jannica; Jacobson, Staffan

2016

Initial wear of cemented carbides in sliding contact with different rock types

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2016

INVESTIGATION OF MATERIAL TRANSFER IN SLIDING FRICTION-TOPOGRAPHY OR SURFACE CHEMISTRY?

Westlund, Viktoria; Heinrichs, Jannica; Jacobson, Staffan

2015

Initial deformation and wear of cemented carbides for rock drilling as evaluated by a sliding wear test

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2015

Soft rock scratches hard cemented carbide

Heinrichs, Jannica; Olsson, Mikael; Yvell, Karin; Jacobson, Staffan

2015

Deformation-activated work material transfer to DLC coatings

Heinrichs, Jannica; Gustavsson, Fredrik; Olsson, Mikael; Jacobson, Staffan

2014

Influence of hardness and microstructure on the mechanisms of deformation and wear of cemented carbides for rock drilling

Heinrichs, Jannica; Yvell, Karin; Olsson, Mikael; Jacobson, Staffan

2014

On the relevance of hardness as a material parameter in the deformation and wear of cemented carbides in rock drilling

Olsson, Mikael; Heinrichs, Jannica; Yvell, Karin; Jacobson, Staffan

2014

Influence of tool steel microstructure on initial material transfer in metal forming – In situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Staffan, Jacobson

2013

New experimental findings on the role of initial material transfer in determining friction and surface damage

Jacobson, Staffan; Heinrichs, Jannica; Olsson, Mikael

2013

Transfer of titanium in sliding contacts - New discoveries and insights revealed by in situ studies in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

2013

Morphology and composition of tribofilms deposited using a tribochemical burnishing technique

Heinrichs, Jannica; Jenei, Istvan Zoltan; Jacobson, Staffan

2013

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

2012

Initiation of galling in forming of ductile metals: – differences between aluminium and austenitic stainless steel studied in situ in the SEM

Heinrichs, Jannica; Olsson, Mikael; Jacobson, Staffan

Ingår i Nordtrib, Trondheim, Norway, 2012, 2012

The influence from shape and size of tool surface defects on the occurrence of galling in cold forming of aluminium

Heinrichs, Jannica; Staffan, Jacobson

2011

Evaluation of TiB2 coatings in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

2011

The Importance of Tool Surface Roughness on the Galling Tendencies in Cold Forming of Aluminium

Heinrichs, Jannica; Jacobson, Staffan

2010

Influence from PVD coatings on galling tendency in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2010

Laboratory test simulation of aluminium cold forming: influence from PVD coatings on the tool on the tendency to galling

Heinrichs, Jannica; Jacobson, Staffan

s. 87-92, 2009

Influence of aluminium pre-treatment on galling in cold forming

Heinrichs, Jannica; Jacobson, Staffan

2009

In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Heinrichs, Jannica; Jarmar, Tobias; Rooth, Mårten; Engqvist, Håkan

Ingår i BIOCERAMICS, VOL 20, PTS 1 AND 2, s. 689-692, 2008

• DOI för In vitro bioactivity of Atomic Layer Deposited titanium dioxide on titanium and silicon substrates

Lab test simulation of galling in cold forming of aluminium

Heinrichs, Jannica; Jacobson, Staffan

Ingår i NordTrib 2008, 2008