Publikationer

3D self-supporting PANI/CNT/CC composite cathode coupled with CNF/PAM dual network gel electrolyte for high specific capacity flexible zinc-ion battery

Li, Jiayi; Wang, Cong; Zhao, Kangkang; Fatima, Sabeen et al.

Ingår i BMC CHEMISTRY, 2026

Artikel i tidskrift

• DOI för 3D self-supporting PANI/CNT/CC composite cathode coupled with CNF/PAM dual network gel electrolyte for high specific capacity flexible zinc-ion battery
• Ladda ner fulltext (pdf) av 3D self-supporting PANI/CNT/CC composite cathode coupled with CNF/PAM dual network gel electrolyte for high specific capacity flexible zinc-ion battery

A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

Wojtowicz, Maria; Wiklund, Urban; Elo, Robin; Jacobson, Staffan

Ingår i Wear, 2026

Artikel i tidskrift

• DOI för A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions
• Ladda ner fulltext (pdf) av A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Ingår i Tribology International, 2026

Artikel i tidskrift

• DOI för A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Ladda ner fulltext (pdf) av A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Bridging Material Design and Intelligent Systems in Low-Dimensional Materials for Electronics and Sensing

Li, Hu; Leifer, Klaus

Ingår i Crystals, 2026

Artikel i tidskrift

• DOI för Bridging Material Design and Intelligent Systems in Low-Dimensional Materials for Electronics and Sensing
• Ladda ner fulltext (pdf) av Bridging Material Design and Intelligent Systems in Low-Dimensional Materials for Electronics and Sensing

Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Jacobson, Staffan

Ingår i Wear, 2026

Artikel i tidskrift

• DOI för Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations
• Ladda ner fulltext (pdf) av Chemical wear of cemented carbide tools in contact with Cu-Zn alloy: investigated using thermodynamic calculations

Comparative evaluation of nerve repair and local tissue response following ReFeel® nerve cuff implantation in a rat sciatic model

Russell, Thomas A.; Tzagiollari, Antzela; Doherty, Bronagh O.; Burke, Orla et al.

Ingår i Frontiers in Bioengineering and Biotechnology, 2026

Artikel i tidskrift

• DOI för Comparative evaluation of nerve repair and local tissue response following ReFeel® nerve cuff implantation in a rat sciatic model
• Ladda ner fulltext (pdf) av Comparative evaluation of nerve repair and local tissue response following ReFeel® nerve cuff implantation in a rat sciatic model

Controlling sputter angles with a 3D mask: Re-masking and depth adjustment of optical gratings

Forsberg, Pontus; Angelsten, Arvid; Karlsson, Mikael

Ingår i Diamond and related materials, 2026

Artikel i tidskrift

• DOI för Controlling sputter angles with a 3D mask: Re-masking and depth adjustment of optical gratings
• Ladda ner fulltext (pdf) av Controlling sputter angles with a 3D mask: Re-masking and depth adjustment of optical gratings

Dense Nanofibrillar Collagen–Silica Hybrids with High Strength and ECM‐Mimetic Tissue Integration

Norein, Norein; Tavakoli, Shima; Wolf, Philipp M.; Xie, Ling et al.

Ingår i Advanced Functional Materials, 2026

Artikel i tidskrift

• DOI för Dense Nanofibrillar Collagen–Silica Hybrids with High Strength and ECM‐Mimetic Tissue Integration
• Ladda ner fulltext (pdf) av Dense Nanofibrillar Collagen–Silica Hybrids with High Strength and ECM‐Mimetic Tissue Integration

Determining Color of Dental Restoration by a Digital Solution: A Preliminary Study for NCS Color System

De Basso, Noran; De Basso, Ninve; Eriksson, Mirva

Ingår i Applied Sciences, 2026

Artikel i tidskrift

• DOI för Determining Color of Dental Restoration by a Digital Solution: A Preliminary Study for NCS Color System
• Ladda ner fulltext (pdf) av Determining Color of Dental Restoration by a Digital Solution: A Preliminary Study for NCS Color System

Dual effects of amorphous SiO₂ in ZrO₂-SiO₂ nanoceramics: Enable viscous flow sintering and inhibit grain coarsening

Fu, Le; Deng, Mingxi; Lei, Zihua; Li, Jiang et al.

Ingår i Open Ceramics, 2026

Artikel i tidskrift

• DOI för Dual effects of amorphous SiO₂ in ZrO₂-SiO₂ nanoceramics: Enable viscous flow sintering and inhibit grain coarsening
• Ladda ner fulltext (pdf) av Dual effects of amorphous SiO₂ in ZrO₂-SiO₂ nanoceramics: Enable viscous flow sintering and inhibit grain coarsening

Efficient process development for laser-based powder bed fusion of a soft-magnetic metallic glass composite

Löfstrand, Julia; Saha, Priyanka; Leviandhika, Vidhiaza; Wiklund, Urban et al.

Ingår i Advanced Engineering Materials, 2026

Artikel i tidskrift

• DOI för Efficient process development for laser-based powder bed fusion of a soft-magnetic metallic glass composite
• Ladda ner fulltext (pdf) av Efficient process development for laser-based powder bed fusion of a soft-magnetic metallic glass composite

Friction and wear behaviour of fully formulated water-based lubricants under rolling/sliding contacts

Hasan, Mushfiq; Björling, Marcus; Elo, Robin; Matta, Christine et al.

Ingår i Tribology International, 2026

Artikel i tidskrift

• DOI för Friction and wear behaviour of fully formulated water-based lubricants under rolling/sliding contacts
• Ladda ner fulltext (pdf) av Friction and wear behaviour of fully formulated water-based lubricants under rolling/sliding contacts

From Process to Performance: Tailoring Materials in Laser-Based Additive Manufacturing and Processing

Leviandhika, Vidhiaza

2026

Doktorsavhandling, sammanläggning

• Ladda ner fulltext (pdf) av From Process to Performance: Tailoring Materials in Laser-Based Additive Manufacturing and Processing

High-Performance Infrared Photodetectors Based on Graphene Nanoribbon Vertical Heterojunctions via Dissociated Double-Walled Carbon Nanotubes

Li, Ziheng; Sun, Yu; Li, Muyang; Han, Nan et al.

Ingår i Nanomaterials, 2026

Artikel i tidskrift

• DOI för High-Performance Infrared Photodetectors Based on Graphene Nanoribbon Vertical Heterojunctions via Dissociated Double-Walled Carbon Nanotubes
• Ladda ner fulltext (pdf) av High-Performance Infrared Photodetectors Based on Graphene Nanoribbon Vertical Heterojunctions via Dissociated Double-Walled Carbon Nanotubes

Investigations on the Correlation of Mechanical Properties and Microstructures with Thermal Behavior of AlSi10Mg Alloy during Laser Powder Bed Fusion

Liu, Jiangwei; Zhang, Zedong; Zhao, Kangkang; Sun, Yu et al.

Ingår i Journal of materials engineering and performance (Print), s. 2555-2566, 2026

Artikel i tidskrift

• DOI för Investigations on the Correlation of Mechanical Properties and Microstructures with Thermal Behavior of AlSi10Mg Alloy during Laser Powder Bed Fusion

On Chemical Wear of Tools: Thermodynamics at the Interface Level

Ekholm, Felix

2026

Doktorsavhandling, sammanläggning

• Ladda ner fulltext (pdf) av On Chemical Wear of Tools: Thermodynamics at the Interface Level

Time-dependent solvothermal synthesis of melamine cyanurate and melamine diborate: experimental and theoretical insights

Atika; Zhang, Zihan; Leifer, Klaus; Hilborn, Jöns et al.

Ingår i Physical Chemistry, Chemical Physics - PCCP, s. 903-911, 2026

Artikel i tidskrift

• DOI för Time-dependent solvothermal synthesis of melamine cyanurate and melamine diborate: experimental and theoretical insights
• Ladda ner fulltext (pdf) av Time-dependent solvothermal synthesis of melamine cyanurate and melamine diborate: experimental and theoretical insights

Towards Neuro-symbolic Classification of Abrasive Wear in Scanning Electron Microscopy

Brannstrom, Andreas; Guerrero, Esteban; Wojtowicz, Maria; Hasselaar, Jonna et al.

Ingår i FOUNDATIONS OF INFORMATION AND KNOWLEDGE SYSTEMS, FOIKS 2026, s. 327-333, 2026

Konferensbidrag

• DOI för Towards Neuro-symbolic Classification of Abrasive Wear in Scanning Electron Microscopy

Unraveling -Ni²⁺/-Mn²⁺ doped Ti₃CNT_x MXene nanowebs for high-performance asymmetric supercapacitors

Fatima, Sabeen; Sun, Yu; Han, Lei; Han, Nan et al.

Ingår i Chemical Engineering Journal, 2026

Artikel i tidskrift

• DOI för Unraveling -Ni²⁺/-Mn²⁺ doped Ti₃CNT_x MXene nanowebs for high-performance asymmetric supercapacitors

5DSTEM: Merging 4DSTEM and Core-Loss EELS: A Path to Detect Parameter-Free Electron Energy-Loss Magnetic Chiral Dichroism with Prospects of Atomic Resolution

Ali, Hasan; Bürgler, Daniel E; Vas, Joseph V; Adam, Roman et al.

Ingår i Microscopy and Microanalysis, s. 143-144, 2025

Artikel i tidskrift

• DOI för 5DSTEM: Merging 4DSTEM and Core-Loss EELS: A Path to Detect Parameter-Free Electron Energy-Loss Magnetic Chiral Dichroism with Prospects of Atomic Resolution

Additive manufacturing of magnesium alloy WE43 for biomedical applications

Larsson, Lisa; Nilsson Åhman, Hanna; D'Elia, Francesco; Persson, Cecilia

2025

Konferensbidrag

Advancing European High-Contrast Imaging R&D Towards the Habitable Worlds Observatory

Laginja, Iva; Carrión-González, Óscar; Laugier, Romain; Matthews, Elisabeth et al.

Ingår i Astrophysics and Space Science, 2025

Artikel i tidskrift

• DOI för Advancing European High-Contrast Imaging R&D Towards the Habitable Worlds Observatory
• Ladda ner fulltext (pdf) av Advancing European High-Contrast Imaging R&D Towards the Habitable Worlds Observatory

Carbide size control in high-speed steels and hardmetals using electron beam powder bed fusion process parameters

Arumskog, Par; Khalid, Saad; Beste, Ulrik

Ingår i Progress in Additive Manufacturing, s. 10901-10912, 2025

Artikel i tidskrift

• DOI för Carbide size control in high-speed steels and hardmetals using electron beam powder bed fusion process parameters
• Ladda ner fulltext (pdf) av Carbide size control in high-speed steels and hardmetals using electron beam powder bed fusion process parameters

Characterization of processability and microstructure formation during L-PBF of ultralight binary Mg-Li alloys

Kotiadis, Stephanie; Persson, Cecilia; D'Elia, Francesco

2025

Konferensbidrag

Deformation induced martensite formation during abrasive wear of hardmetals

Toller-Nordström, Lisa; Holmberg, Anders; Gee, M.; Mingard, K. et al.

Ingår i International journal of refractory metals & hard materials, 2025

Artikel i tidskrift

• DOI för Deformation induced martensite formation during abrasive wear of hardmetals

Design of planar 2D semiconductors incorporating sp²-hybridized group 13 metals with boron, carbon, and nitrogen

Zhang, Zihan; Leifer, Klaus; Ahuja, Rajeev; Luo, Wei

Ingår i Nano Energy, 2025

Artikel i tidskrift

• DOI för Design of planar 2D semiconductors incorporating sp²-hybridized group 13 metals with boron, carbon, and nitrogen
• Ladda ner fulltext (pdf) av Design of planar 2D semiconductors incorporating sp²-hybridized group 13 metals with boron, carbon, and nitrogen

Dual alkali etching for osseointegration and reduced bacterial adhesion: a feasible alternative to SLA

Chettri, Sushmita; Zhou, Huasi; Zhu, Wei; Engqvist, Håkan et al.

Ingår i Materials Advances, s. 3084-3094, 2025

Artikel i tidskrift

• DOI för Dual alkali etching for osseointegration and reduced bacterial adhesion: a feasible alternative to SLA
• Ladda ner fulltext (pdf) av Dual alkali etching for osseointegration and reduced bacterial adhesion: a feasible alternative to SLA

E-beam fluorinated CVD graphene: in-situ XPS study on stability and NH₃ adsorption doping effect

Malesys, V; Duan, T.; Denys, E.; Li, Hu et al.

Ingår i Nanotechnology, 2025

Artikel i tidskrift

• DOI för E-beam fluorinated CVD graphene: in-situ XPS study on stability and NH₃ adsorption doping effect

Effect of 3 wt% Cu on the Microstructure and Hardness of a Ti-10Ta-1.6Zr Alloy

Hashe, Nobom G.; Fowler, Lee; Norgren, Susanne; Cornish, Lesley A. et al.

Ingår i Materials, 2025

Artikel i tidskrift

• DOI för Effect of 3 wt% Cu on the Microstructure and Hardness of a Ti-10Ta-1.6Zr Alloy
• Ladda ner fulltext (pdf) av Effect of 3 wt% Cu on the Microstructure and Hardness of a Ti-10Ta-1.6Zr Alloy

Effect of critical parameters on the performance of integrated climate controlled solar desiccant air conditioning system

Ullah, Sibghat; Ali, Muzaffar; Ditta, Allah; Chaudhary, Ghulam Qadar et al.

Ingår i Energy Reports, s. 2451-2463, 2025

Artikel i tidskrift

• DOI för Effect of critical parameters on the performance of integrated climate controlled solar desiccant air conditioning system
• Ladda ner fulltext (pdf) av Effect of critical parameters on the performance of integrated climate controlled solar desiccant air conditioning system

Effect of high energy ball milling, heat treatment and spark plasma sintering on structure, composition, thermal stability and magnetism in CoCrFeNiGa_x (x=0.5; 1) high entropy alloys

Shkodich, N. F.; Smoliarova, T.; Ali, Hasan; Eggert, B. et al.

Ingår i Acta Materialia, 2025

Artikel i tidskrift

• DOI för Effect of high energy ball milling, heat treatment and spark plasma sintering on structure, composition, thermal stability and magnetism in CoCrFeNiGa_x (x=0.5; 1) high entropy alloys
• Ladda ner fulltext (pdf) av Effect of high energy ball milling, heat treatment and spark plasma sintering on structure, composition, thermal stability and magnetism in CoCrFeNiGa_x (x=0.5; 1) high entropy alloys

Electron magnetic circular dichroism of thin films and at single interfaces at atomic lattice plane resolution

Manjeshwar Sathyanath, Sharath Kumar

2025

Doktorsavhandling, sammanläggning

• Ladda ner fulltext (pdf) av Electron magnetic circular dichroism of thin films and at single interfaces at atomic lattice plane resolution

Energy Dispersion Relationship and Hofstadter Butterfly of Triangle and Rectangular Moiré Patterns in Tight Binding States

Li, Ziheng; Liu, Jiangwei; Zheng, Xiaoxiao; Sun, Yu et al.

Ingår i PHYSICS, 2025

Artikel i tidskrift

• DOI för Energy Dispersion Relationship and Hofstadter Butterfly of Triangle and Rectangular Moiré Patterns in Tight Binding States
• Ladda ner fulltext (pdf) av Energy Dispersion Relationship and Hofstadter Butterfly of Triangle and Rectangular Moiré Patterns in Tight Binding States

Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Leviandhika, Vidhiaza; D'Elia, Francesco; Shtender, Vitalii; Mellin, P. et al.

Ingår i Journal of Materials Research and Technology, s. 2352-2363, 2025

Artikel i tidskrift

• DOI för Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam
• Ladda ner fulltext (pdf) av Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Explaining the formation of protective transfer films on cutting tools - using thermodynamic calculations

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

2025

Konferensbidrag

Facile construction of mechanically robust and highly osteogenic materials for bone regeneration

Chen, Song; Liu, Dachuan; Guo, Qianping; Dong, Li et al.

Ingår i MATERIALS TODAY BIO, 2025

Artikel i tidskrift

• DOI för Facile construction of mechanically robust and highly osteogenic materials for bone regeneration
• Ladda ner fulltext (pdf) av Facile construction of mechanically robust and highly osteogenic materials for bone regeneration

Geometric Design of Additively Manufactured WE43 Magnesium Lattices: Controlling Degradation and Strength Through Topology

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2025

Konferensbidrag

Graphene-enhanced polymers for additive manufacturing in biomedical applications

Spanou, Andrea

2025

Doktorsavhandling, sammanläggning

• Ladda ner fulltext (pdf) av Graphene-enhanced polymers for additive manufacturing in biomedical applications

Highly toughened translucent glass matrix nanoceramics enhanced by amorphous Al2O3

Zhou, Huasi; Yang, Liu; Fu, Le; Engqvist, Håkan et al.

Ingår i JOURNAL OF ADVANCED CERAMICS, 2025

Artikel i tidskrift

• DOI för Highly toughened translucent glass matrix nanoceramics enhanced by amorphous Al2O3
• Ladda ner fulltext (pdf) av Highly toughened translucent glass matrix nanoceramics enhanced by amorphous Al2O3

Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach

D'Elia, Francesco; Hoseini-Athar, Mohammad; Vaddamanu, Satya Chaitanya; Ersson, Mikael et al.

Ingår i Materials & design, 2025

Artikel i tidskrift

• DOI för Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach
• Ladda ner fulltext (pdf) av Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach

Injectable and Assembled Calcium Sulfate/Magnesium Silicate 3D Scaffold Promotes Bone Repair by In Situ Osteoinduction

Zhu, Wei; Zhao, Tianhao; Wang, Han; Liu, Guangli et al.

Ingår i Bioengineering, 2025

Artikel i tidskrift

• DOI för Injectable and Assembled Calcium Sulfate/Magnesium Silicate 3D Scaffold Promotes Bone Repair by In Situ Osteoinduction
• Ladda ner fulltext (pdf) av Injectable and Assembled Calcium Sulfate/Magnesium Silicate 3D Scaffold Promotes Bone Repair by In Situ Osteoinduction

Instabilities in the blistering of two-dimensional materials

Pandey, Mukesh; Wang, Guorui; Singh, Gagandeep; Ahuja, Rajeev et al.

Ingår i 2D Materials, 2025

Artikel, forskningsöversikt

• DOI för Instabilities in the blistering of two-dimensional materials

Investigations on the wear and thermal characteristics of SiC reinforced AlSi10Mg composites fabricated by laser powder bed fusion

Liu, Jiangwei; Zhao, Kangkang; Sun, Yu; Khan, Safia et al.

Ingår i Materials Today Communications, 2025

Artikel i tidskrift

• DOI för Investigations on the wear and thermal characteristics of SiC reinforced AlSi10Mg composites fabricated by laser powder bed fusion

Large-Scale and Ultraclean Dry Transfer of Two-Dimensional Materials via Liquid Nitrogen-Assisted Cryogenic Exfoliation

Zheng, Xiaoxiao; Han, Lei; Fatima, Sabeen; Khan, Safia et al.

Ingår i Nano Letters, s. 9967-9975, 2025

Artikel i tidskrift

• DOI för Large-Scale and Ultraclean Dry Transfer of Two-Dimensional Materials via Liquid Nitrogen-Assisted Cryogenic Exfoliation

Machine Learning-Assisted Development of Injectable, Mechanically Robust, and Energy Metabolism-Modulating Brushite Cements

Liu, Dachuan; Shi, Jiaxu; Ni, Youhao; Dong, Li et al.

Ingår i Research, 2025

Artikel i tidskrift

• DOI för Machine Learning-Assisted Development of Injectable, Mechanically Robust, and Energy Metabolism-Modulating Brushite Cements
• Ladda ner fulltext (pdf) av Machine Learning-Assisted Development of Injectable, Mechanically Robust, and Energy Metabolism-Modulating Brushite Cements

MII-polyphosphate-based wax-like material with osteogenesis and blood occlusion

Zhu, Wei; Zhou, Huasi; Wei, Zhanqi; Weng, Xisheng et al.

Ingår i Bioactive Materials, s. 564-573, 2025

Artikel i tidskrift

• DOI för MII-polyphosphate-based wax-like material with osteogenesis and blood occlusion
• Ladda ner fulltext (pdf) av MII-polyphosphate-based wax-like material with osteogenesis and blood occlusion

MIRAC-5 on the MMT with MAPS: annular groove phase mask N-band coronagraphic upgrade

Miller, Alyssa L.; Leisenring, Jarron; Meyer, Michael; De Xivry, Gilles Orban et al.

Ingår i Proceedings Volume 13627 Techniques and Instrumentation for Detection of Exoplanets XII, s. 1-9, 2025

Konferensbidrag

• DOI för MIRAC-5 on the MMT with MAPS: annular groove phase mask N-band coronagraphic upgrade

N-induced antibacterial capability of ZrO₂-SiO₂ glass ceramics by ion implantation

Zhou, Huasi; Engqvist, Håkan; Donzel-Gargand, Olivier; Primetzhofer, Daniel et al.

Ingår i Applied Surface Science, s. 161836, 2025

Artikel i tidskrift

• DOI för N-induced antibacterial capability of ZrO₂-SiO₂ glass ceramics by ion implantation
• Ladda ner fulltext (pdf) av N-induced antibacterial capability of ZrO₂-SiO₂ glass ceramics by ion implantation

On the tool wear reducing mechanism of Zn in brass alloys

Ekholm, Felix; Heinrichs Lindgren, J.; Wiklund, Urban; Jacobson, Staffan

Ingår i Wear, 2025

Artikel i tidskrift

• DOI för On the tool wear reducing mechanism of Zn in brass alloys
• Ladda ner fulltext (pdf) av On the tool wear reducing mechanism of Zn in brass alloys

Porosity predictions in additive manufacturing of Mg alloy WE43 using a Gaussian Process methodology

Ramesh Babu, Shashank; Sjölund, Jens; Persson, Cecilia

2025

Konferensbidrag

Powder-based precipitation simulation of a MgZnCa alloy

Alonso Rancurel, Belén; Shtender, Vitalii; Primetzhofer, Daniel; D'Elia, Francesco et al.

2025

Konferensbidrag

Printability, mechanical properties and corrosion resistance of WE43 magnesium alloy porous scaffolds processed by laser-powder bed fusion

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2025

Konferensbidrag

Printability, microstructure formation, and material properties during L-PBF of binary Mg-Li alloys

Kotiadis, Stephanie; Persson, Cecilia; D'Elia, Francesco

2025

Konferensbidrag

Pyrophosphate-Containing Calcium Phosphates Negatively Impact Heterotopic Bone Quality

Jolic, Martina; Åberg, Isabella; Omar, Omar; Engqvist, Håkan et al.

Ingår i Advanced Healthcare Materials, 2025

Artikel i tidskrift

• DOI för Pyrophosphate-Containing Calcium Phosphates Negatively Impact Heterotopic Bone Quality
• Ladda ner fulltext (pdf) av Pyrophosphate-Containing Calcium Phosphates Negatively Impact Heterotopic Bone Quality

Quantitative magnetic mapping in TEM through accurate 2D thickness determination

Vas, Joseph Vimal; Ali, Hasan; Shi, Wen; Denneulin, Thibaud et al.

Ingår i Ultramicroscopy, 2025

Artikel i tidskrift

• DOI för Quantitative magnetic mapping in TEM through accurate 2D thickness determination
• Ladda ner fulltext (pdf) av Quantitative magnetic mapping in TEM through accurate 2D thickness determination

Relationship between rheological properties and biological activity of porcine skin derived-hydrogels for 3D cell culture

Palierse, Estelle; Persson, Cecilia; Aramesh, Morteza

2025

Konferensbidrag

Skin derived bioinks for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Konferensbidrag

Skin-derived hydrogels for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Konferensbidrag

Skin-Derived Hydrogels for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Konferensbidrag

Superior self-powered infrared photodetector via semiconducting graphene-nanoribbons-based vertical heterojunctions

Sun, Yu; Wang, Mingyang; Zheng, Xiaoxiao; Li, Ziheng et al.

Ingår i Applied Physics Reviews, 2025

Artikel i tidskrift

• DOI för Superior self-powered infrared photodetector via semiconducting graphene-nanoribbons-based vertical heterojunctions

Superior thermal conductivity graphene films achieved by laser-irradiation-treatment

Zheng, Xiaoxiao; Liu, Jiangwei; Liu, Benqing; Liu, Wencheng et al.

Ingår i Carbon, 2025

Artikel i tidskrift

• DOI för Superior thermal conductivity graphene films achieved by laser-irradiation-treatment

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Ingår i International journal of refractory metals & hard materials, 2025

Artikel i tidskrift

• DOI för The influence of oxygen on the wear of WC-Co sliding against copper
• Ladda ner fulltext (pdf) av The influence of oxygen on the wear of WC-Co sliding against copper

The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)

Wahlund, Jan-Erik; Bergman, Jan E. S.; Åhlén, Lennart; Puccio, Walter et al.

Ingår i Space Science Reviews, 2025

Artikel, forskningsöversikt

• DOI för The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)
• Ladda ner fulltext (pdf) av The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)

Topical Delivery of Calcium Silicate for Nail Health: A Clinical and Experimental Evaluation

Engqvist, Viktoria; Engqvist, Håkan

Ingår i Cosmetics, 2025

Artikel i tidskrift

• DOI för Topical Delivery of Calcium Silicate for Nail Health: A Clinical and Experimental Evaluation
• Ladda ner fulltext (pdf) av Topical Delivery of Calcium Silicate for Nail Health: A Clinical and Experimental Evaluation

Toughening glass ceramics nanocomposites via engineering interfaces

Zhou, Huasi; Wang, Yiren; Yu, Haiyang; Fu, Le et al.

Ingår i Materials & design, 2025

Artikel i tidskrift

• DOI för Toughening glass ceramics nanocomposites via engineering interfaces
• Ladda ner fulltext (pdf) av Toughening glass ceramics nanocomposites via engineering interfaces

Understanding crystal nucleation and growth in the Mg-Zn-Ca system for additive manufacturing of resorbable implants

Alonso Rancurel, Belén; Persson, Cecilia; Martin, Fisk; D'Elia, Francesco et al.

2025

Konferensbidrag

Visualizing subatomic orbital and spin moments using a scanning transmission electron microscope

Ali, Hasan; Rusz, Ján; Bürgler, Daniel E.; Vas, Joseph V. et al.

Ingår i Nature Materials, s. 1215-1220, 2025

Artikel i tidskrift

• DOI för Visualizing subatomic orbital and spin moments using a scanning transmission electron microscope
• Ladda ner fulltext (pdf) av Visualizing subatomic orbital and spin moments using a scanning transmission electron microscope

Waveguide Spectroscopy for Differentiation of Bacteria

Angelsten, Arvid; Forsberg, Pontus; Engqvist, Håkan; Xia, Wei et al.

Ingår i Analytical Chemistry, s. 21314-21323, 2025

Artikel i tidskrift

• DOI för Waveguide Spectroscopy for Differentiation of Bacteria
• Ladda ner fulltext (pdf) av Waveguide Spectroscopy for Differentiation of Bacteria

Wet-adhesive and antibacterial PAH-TPP coacervates with self-mineralizing capability for cranial flap fixation

Chen, Weicheng; Shi, Jiaxu; Liu, Dachuan; Lu, Kai et al.

Ingår i Bioactive Materials, s. 1-16, 2025

Artikel i tidskrift

• DOI för Wet-adhesive and antibacterial PAH-TPP coacervates with self-mineralizing capability for cranial flap fixation
• Ladda ner fulltext (pdf) av Wet-adhesive and antibacterial PAH-TPP coacervates with self-mineralizing capability for cranial flap fixation

Writing an impactful Review: top tips from the Editors

Chatterjee, Kaushik; Davies, Gemma-Louise; Engqvist, Håkan; Winter, Jessica

Ingår i Journal of materials chemistry. B, s. 4041-4044, 2025

Artikel i tidskrift

• DOI för Writing an impactful Review: top tips from the Editors

A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images

Zhou, Yijun; Klintström, Eva; Klintström, Benjamin; Ferguson, Stephen et al.

Ingår i Computer Methods and Programs in Biomedicine, 2024

Artikel i tidskrift

• DOI för A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images
• Ladda ner fulltext (pdf) av A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images

Calcium-, magnesium-, and yttrium-doped lithium nickel phosphate nanomaterials as high-performance catalysts for electrochemical water oxidation reaction

Nasir, Mehwish Huma; Niaz, Hajira; Yunus, Naila; Ali, Urooj et al.

Ingår i Nanotechnology Reviews, 2024

Artikel i tidskrift

• DOI för Calcium-, magnesium-, and yttrium-doped lithium nickel phosphate nanomaterials as high-performance catalysts for electrochemical water oxidation reaction
• Ladda ner fulltext (pdf) av Calcium-, magnesium-, and yttrium-doped lithium nickel phosphate nanomaterials as high-performance catalysts for electrochemical water oxidation reaction

Crystalline-amorphous dual-phase ceramic nanocomposites regulated by entropy engineering

Fu, Le; Wang, Bohan; Jiang, Fuqing; Yu, Wenjun et al.

Ingår i Journal of The American Ceramic Society, s. 7497-7512, 2024

Artikel i tidskrift

• DOI för Crystalline-amorphous dual-phase ceramic nanocomposites regulated by entropy engineering

Decellularized extracellular matrix bioinks for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Persson, Cecilia; Aramesh, Morteza

2024

Konferensbidrag

Development of an abrasion test relevant for tillage tools

Wojtowicz, Maria; Heinrichs Lindgren, Jannica; Wiklund, Urban; Bäckström, Anders et al.

2024

Konferensbidrag

Effect of Initial Surface Morphology and Laser Parameters on the Laser Polishing of Stainless Steel Manufactured by Laser Powder Bed Fusion

Liu, Jiangwei; Zhao, Kangkang; Wang, Xiebin; Li, Hu

Ingår i Materials, 2024

Artikel i tidskrift

• DOI för Effect of Initial Surface Morphology and Laser Parameters on the Laser Polishing of Stainless Steel Manufactured by Laser Powder Bed Fusion
• Ladda ner fulltext (pdf) av Effect of Initial Surface Morphology and Laser Parameters on the Laser Polishing of Stainless Steel Manufactured by Laser Powder Bed Fusion

Electron beam irradiation-induced atomically thin domes of two-dimensional materials: Graphene and MoS₂

Pandey, Mukesh; Ahuja, Rajeev; Kumar, Rakesh

Ingår i Surfaces and Interfaces, 2024

Artikel i tidskrift

• DOI för Electron beam irradiation-induced atomically thin domes of two-dimensional materials: Graphene and MoS₂

Enhanced Electrochemical Performance of MWCNT-Assisted Molybdenum-Titanium Carbide MXene as a Potential Electrode Material for Energy Storage Application

Hakim, M. Waqas; Ali, Irfan; Fatima, Sabeen; Li, Hu et al.

Ingår i ACS Omega, s. 8763-8772, 2024

Artikel i tidskrift

• DOI för Enhanced Electrochemical Performance of MWCNT-Assisted Molybdenum-Titanium Carbide MXene as a Potential Electrode Material for Energy Storage Application
• Ladda ner fulltext (pdf) av Enhanced Electrochemical Performance of MWCNT-Assisted Molybdenum-Titanium Carbide MXene as a Potential Electrode Material for Energy Storage Application

Exploiting hot electrons from a plasmon nanohybrid system for the photoelectroreduction of CO₂

Dey, Ananta; Silveira, Vitor R.; Bericat Vadell, Robert; Lindblad, Andreas et al.

Ingår i Communications Chemistry, 2024

Artikel i tidskrift

• DOI för Exploiting hot electrons from a plasmon nanohybrid system for the photoelectroreduction of CO₂
• Ladda ner fulltext (pdf) av Exploiting hot electrons from a plasmon nanohybrid system for the photoelectroreduction of CO₂

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Ingår i Wear, 2024

Artikel i tidskrift

• DOI för Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Ladda ner fulltext (pdf) av Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Fabrication of mechanically robust nanoporous ZrSiO₄ ceramics at low temperature with a low doping level of Mn dopant

Fu, Le; Zhou, Huasi; Klintberg, Lena; Engqvist, Håkan et al.

Ingår i International Journal of Applied Ceramic Technology, s. 1954-1964, 2024

Artikel i tidskrift

• DOI för Fabrication of mechanically robust nanoporous ZrSiO₄ ceramics at low temperature with a low doping level of Mn dopant
• Ladda ner fulltext (pdf) av Fabrication of mechanically robust nanoporous ZrSiO₄ ceramics at low temperature with a low doping level of Mn dopant

First-principles study of Stone-Wales defects in monolayer and Bernal-stacked hexagonal boron nitride

Wang, Mingyuan; Zhang, Quan; Jiang, Yun-cai; Hussain, Shahid et al.

Ingår i Journal of Physics D, 2024

Artikel i tidskrift

• DOI för First-principles study of Stone-Wales defects in monolayer and Bernal-stacked hexagonal boron nitride

Giant magnetocaloric effect in the (Mn,Fe)NiSi-system

Ghorai, Sagar; Vieira, Rafael Martinho; Shtender, Vitalii; Delczeg-Czirjak, Erna Krisztina et al.

Ingår i Physical Review Materials, 2024

Artikel i tidskrift

• DOI för Giant magnetocaloric effect in the (Mn,Fe)NiSi-system
• Ladda ner fulltext (pdf) av Giant magnetocaloric effect in the (Mn,Fe)NiSi-system

Graphene nanoribbons/Ru as efficient cathodic catalysts for high-performance rechargeable Li-CO₂ batteries

Ye, Xiaoling; Liu, Wencheng; Lu, Yan; Zheng, Xiaoxiao et al.

Ingår i Journal of Materials Chemistry A, s. 10713-10725, 2024

Artikel i tidskrift

• DOI för Graphene nanoribbons/Ru as efficient cathodic catalysts for high-performance rechargeable Li-CO₂ batteries

High Performance Self-Powered Photodetectors Based on Graphene Nanoribbons/Al₂O₃/InGaZnO Heterojunctions

Ye, Xiaoling; Zheng, Xiaoxiao; Han, Lei; Sun, Yu et al.

Ingår i IEEE Photonics Journal, 2024

Artikel i tidskrift

• DOI för High Performance Self-Powered Photodetectors Based on Graphene Nanoribbons/Al₂O₃/InGaZnO Heterojunctions
• Ladda ner fulltext (pdf) av High Performance Self-Powered Photodetectors Based on Graphene Nanoribbons/Al₂O₃/InGaZnO Heterojunctions

High-performance SiO₂ matrix glass ceramics

Zhou, Huasi

2024

Doktorsavhandling, sammanläggning

• Ladda ner fulltext (pdf) av High-performance SiO₂ matrix glass ceramics

Hydrogen evolution with hot electrons on a plasmonic-molecular catalyst hybrid system

Dey, Ananta; Mendalz, Amal; Wach, Anna; Vadell, Robert Bericat et al.

Ingår i Nature Communications, 2024

Artikel i tidskrift

• DOI för Hydrogen evolution with hot electrons on a plasmonic-molecular catalyst hybrid system
• Ladda ner fulltext (pdf) av Hydrogen evolution with hot electrons on a plasmonic-molecular catalyst hybrid system

Hydrogen production by a fully de novo enzyme

Berglund, Sigrid; Bassy, Clara; Kaya, Ibrahim; Andrén, Per E. et al.

Ingår i Dalton Transactions, s. 12905-12916, 2024

Artikel i tidskrift

• DOI för Hydrogen production by a fully de novo enzyme
• Ladda ner fulltext (pdf) av Hydrogen production by a fully de novo enzyme

Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels

Zhou, Yijun; Höglund, Lisa; Samanta, Ayan; Procter, Philip et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2024

Artikel i tidskrift

• DOI för Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels
• Ladda ner fulltext (pdf) av Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels

In vitro cell study of calcium phosphate cement-PLLA models for hard-tissue implants

Echeverri Correa, Estefania; Grzeszczak, Ana; Åberg, Jonas; Hulsart Billström, Gry et al.

2024

Konferensbidrag

Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments

Hassila, Carl Johan; Malmelov, Andreas; Andersson, Carl; Hektor, Johan et al.

Ingår i Materials, 2024

Artikel i tidskrift

• DOI för Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments
• Ladda ner fulltext (pdf) av Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments

Investigation of the chemical wear of cemented carbides in sliding contact against Cu-Zn alloys using CALPHAD

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

2024

Konferensbidrag

Kinetic and thermodynamic analysis of ammonia electro-oxidation over alumina supported copper oxide (CuO/Al₂O₃) catalysts for direct ammonia fuel cells

Khan, Safia; Ahmad, Awais; Karri, Rama Rao; Ouladsmane, Mohamed et al.

Ingår i International journal of hydrogen energy, s. 1206-1216, 2024

Artikel i tidskrift

• DOI för Kinetic and thermodynamic analysis of ammonia electro-oxidation over alumina supported copper oxide (CuO/Al₂O₃) catalysts for direct ammonia fuel cells

Laser-Powder Bed Fusion of WE43 Magnesium Alloy for Biomedical Applications: Exploring the Synergy of Design, Printability, and Degradability

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2024

Konferensbidrag

Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear

Holmberg, Jonas; Berglund, Johan; Brohede, Ulrika; Åkerfeldt, Pia et al.

Ingår i The International Journal of Advanced Manufacturing Technology, s. 1823-1842, 2024

Artikel i tidskrift

• DOI för Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear
• Ladda ner fulltext (pdf) av Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear

Magnetic property changes of NdGa upon hydrogen absorption

Cedervall, Johan; Shtender, Vitalii; Manuel, Pascal; Pomjakushin, Vladimir et al.

Ingår i Physical Review B, 2024

Artikel i tidskrift

• DOI för Magnetic property changes of NdGa upon hydrogen absorption
• Ladda ner fulltext (pdf) av Magnetic property changes of NdGa upon hydrogen absorption

Making the diamond vortex phase masks for the METIS instrument

Forsberg, Pontus; Karvinen, Petri; Ronayette, Samuel; Kuittinen, Markku et al.

Ingår i Diamond and related materials, 2024

Artikel i tidskrift

• DOI för Making the diamond vortex phase masks for the METIS instrument
• Ladda ner fulltext (pdf) av Making the diamond vortex phase masks for the METIS instrument

Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty

Ghandour, Salim; Hong, Linglu; Aramesh, Morteza; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2024

Artikel i tidskrift

• DOI för Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty
• Ladda ner fulltext (pdf) av Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty

METIS high-contrast imaging: from final design to manufacturing and testing

Absil, Olivier; Kenworthy, Matthew; Delacroix, Christian; Orban de Xivry, Gilles et al.

Ingår i Ground-based and Airborne Instrumentation for Astronomy X, 2024

Konferensbidrag

• DOI för METIS high-contrast imaging: from final design to manufacturing and testing

Mitigating Poor Corrosion Resistance of WE43Mg Alloy Lattice Structures through Optimized Structural Design

Alomar, Zaki; Minárik, Peter; Persson, Cecilia; Drozdenko, Daria et al.

Ingår i 16th Symposium on Biodegradable Metals, Krakow, Poland, 2024

Konferensbidrag