Arnaud le Febvrier
Forskare vid Institutionen för kemi - Ångström; Oorganisk kemi
- E-post:
- arnaud.lefebvrier@kemi.uu.se
- Besöksadress:
- Lägerhyddsvägen 1
- Postadress:
- Box 538
751 21 Uppsala
- ORCID:
- 0000-0002-3059-7392
Mer information visas för dig som medarbetare om du loggar in.
Biografi
Denna text finns inte på svenska, därför visas den engelska versionen.
Arnaud le Febvrier received his Ph.D. degree in 2012 in materials science (Chemistry) at the University of Rennes (France) working on oxide films for ferroelectricity and piezoelectricity. He has continued his career with a Postdoctoral fellowship in NIMS (National institute for material science) in Tsukuba (Japan) working on oxynitride films for optoelectronic applications. He finally arrived in Sweden in 2015 to pursue his career in academia with several positions at Linköping University (Postdoctoral fellowship, Assistant Professor, Senior Staff Scientist) for a total of 9 years. In 2021, Arnaud le Febvrier received the title of Docent in materials science from Linköping University. He finally joined Uppsala University as research scientist in September 2024.
He is also part of the early career advisory board of Materials today electronics journal and part of the organizing committee of ICMTF 2025 (San Diego, USA) in the Sustainable Surface Engineering symposium.
Forskning
Denna text finns inte på svenska, därför visas den engelska versionen.
His research is focused on fundamental and application-inspired studies of coatings, whereby the defects in the material are introduced/controlled to enhance physical properties. Various applications are aimed: thermoelectricity, hard coating, protective coatings, fuel cell, and optically active coatings are few of them.
Research interest: it involves the design, development, and understanding of physical properties of coating for promising thermoelectric/electrical/mechanical properties by controlling defects in a material. Inserting defects (0D, 1D, 2D, 3D) in a control manner can enhance targeted physical properties. This implies a high level of control of the material synthesis and of understanding the induced properties. He has a particular interest in the control of defects in nanocomposite and their potential in improving and/or opening new doors for several application domains.
Publikationer
Urval av publikationer
- Enhanced Thermoelectric Properties by Embedding Fe Nanoparticles into CrN Films for Energy Harvesting Applications (2024)
- Thermoelectric Characteristics of Self-Supporting WSe2-Nanosheet/PEDOT-Nanowire Composite Films (2023)
- Effect of modulation period and thickness ratio on the growth and mechanical properties of heteroepitaxial c-Ti0.4Al0.6N/h-Cr2N multilayer films (2023)
- Growth and thermal stability of Sc-doped BaZrO3 thin films deposited on single crystal substrates (2023)
- Influence of Generated Defects by Ar Implantation on the Thermoelectric Properties of ScN (2022)
- p-type behavior of CrN thin films via control of point defects (2022)
- An upgraded ultra-high vacuum magnetron-sputtering system for high-versatility and software-controlled deposition (2021)
- Effect of ion-implantation-induced defects and Mg dopants on the thermoelectric properties of ScN (2018)
- Wet-cleaning of MgO(001) (2017)
Senaste publikationer
- Unusual tilted growth and epitaxial relationship of NaCl B1-structured NiO and CrN on r-plane Al2O3 (2024)
- Defect formation and growth in metal nanocomposites consisting of Cu nanoparticles embedded in Ni or Al coatings (2024)
- Mechanical properties of Xe-ion-irradiated high-entropy-alloy-based multilayers (2024)
- Influence of Ammonia Annealing on Cr-N Thin Films and Their Thermoelectric Properties (2024)
- Effect of Mo content on the corrosion resistance of (CoCrFeNi)1−xMox thin films in sulfuric acid (2024)
Alla publikationer
Artiklar
- Unusual tilted growth and epitaxial relationship of NaCl B1-structured NiO and CrN on r-plane Al2O3 (2024)
- Defect formation and growth in metal nanocomposites consisting of Cu nanoparticles embedded in Ni or Al coatings (2024)
- Mechanical properties of Xe-ion-irradiated high-entropy-alloy-based multilayers (2024)
- Influence of Ammonia Annealing on Cr-N Thin Films and Their Thermoelectric Properties (2024)
- Effect of Mo content on the corrosion resistance of (CoCrFeNi)1−xMox thin films in sulfuric acid (2024)
- Synthesis and characterization of c-TiAlN/h-Cr2N multilayer films deposited by magnetron sputtering on Si (100) substrates (2024)
- Local structure of hydrated nanocrystalline films of the proton conductor BaZr1-Sc O3-/2 studied by infrared spectroscopy (2024)
- Enhanced Thermoelectric Properties by Embedding Fe Nanoparticles into CrN Films for Energy Harvesting Applications (2024)
- Molecularly-induced roughness and oxidation in cobalt/organodithiol/cobalt nanolayers synthesized by sputter-deposition and molecular sublimation (2024)
- Stoichiometry Effects on the Chemical Ordering and Superconducting Properties in TiZrTaNbNx Refractory High Entropy Nitrides (2024)
- Reflective, polarizing, and magnetically soft amorphous neutron optics with 11 B-enriched B 4 C (2024)
- Growth and optical properties of NiO thin films deposited by pulsed dc reactive magnetron sputtering (2023)
- Effect of O/N content on the phase, morphology, and optical properties of titanium oxynitride thin films (2023)
- Effect of induced defects on conduction mechanisms of noble-gas-implanted ScN thin films (2023)
- Thermoelectric properties and electronic structure of Cr(Mo,V)Nx thin films studied by synchrotron and lab-based x-ray spectroscopy (2023)
- Thermoelectric properties and electronic structure of Cr(Mo,V)Nx thin films studied by synchrotron and lab-based x-ray spectroscopy (2023)
- Evolution of microstructure and properties of TiNbCrAlHfN films grown by unipolar and bipolar high-power impulse magnetron co-sputtering (2023)
- Corundum-structured AlCrNbTi oxide film grown using high-energy early-arriving ion irradiation in high-power impulse magnetron sputtering (2023)
- Single-Phase Growth, Stabilization, and Electrical Properties of B Phase VO<sub>2</sub> Films Grown on Mica by Reactive Magnetron Sputtering (2023)
- Microstructure control and property switching in stress-free van der Waals epitaxial VO2 films on mica (2023)
- Low temperature epitaxial growth of Cantor-nitride thin films by magnetic field assisted magnetron sputtering (2023)
- Thermoelectric Characteristics of Self-Supporting WSe2-Nanosheet/PEDOT-Nanowire Composite Films (2023)
- Phase Composition and Thermoelectric Properties of Epitaxial CrMoVN Thin Films (2023)
- Phase Composition and Thermoelectric Properties of Epitaxial CrMoVN Thin Films (2023)
- Effect of tilted closed-field magnetron design on the microstructure and mechanical properties of TiZrNbTaN coatings (2023)
- Valence electron concentration- and N vacancy-induced elasticity in cubic early transition metal nitrides (2023)
- Effect of modulation period and thickness ratio on the growth and mechanical properties of heteroepitaxial c-Ti0.4Al0.6N/h-Cr2N multilayer films (2023)
- Growth and stability of epitaxial zirconium diboride thin films on silicon (111) substrate (2023)
- Growth and thermal stability of Sc-doped BaZrO3 thin films deposited on single crystal substrates (2023)
- Phase formation in CrFeCoNi nitride thin films (2023)
- Structural evolution and thermoelectric properties of Mg3SbxBi2-x thin films deposited by magnetron sputtering (2023)
- Structural stability under Xe-ion irradiation of TiZrNbTaV-based high-entropy alloy and nitride films (2023)
- Thin-film thermocouples of Ni-joined thermoelectric Ca3Co4O9 (2023)
- Influence of Generated Defects by Ar Implantation on the Thermoelectric Properties of ScN (2022)
- Epitaxial Growth of CaMnO3–y Films on LaAlO3 (11‾20) by Pulsed Direct Current Reactive Magnetron Sputtering (2022)
- The effects of copper addition on phase composition in (CrFeCo)1-yNy multicomponent thin films (2022)
- Plasma diagnostics and film growth of multicomponent nitride thin films with magnetic-field-assisted-dc magnetron sputtering (2022)
- Thin film growth and mechanical properties of CrFeCoNi/TiNbZrTa multilayers (2022)
- p-type behavior of CrN thin films via control of point defects (2022)
- Corrosion Resistance and Catalytic Activity toward the Oxygen Reduction Reaction of CoCrFexNi (0 ≤ x ≤ 0.7) Thin Films (2022)
- Thermal, electrical, and mechanical properties of hard nitrogen-alloyed Cr thin films deposited by magnetron sputtering (2022)
- The effect of the Nb concentration on the corrosion resistance of nitrogen-containing multicomponent TiZrTaNb-based films in acidic environments (2022)
- Epitaxial growth and thermoelectric properties of Mg3Bi2 thin films deposited by magnetron sputtering (2022)
- Solid-State Janus Nanoprecipitation Enables Amorphous-Like Heat Conduction in Crystalline Mg3Sb2-Based Thermoelectric Materials (2022)
- Effects of alloying and deposition temperature on phase formation and superconducting properties of TiZrTaNb-based high entropy-alloy films (2022)
- Xe-ion-irradiation-induced structural transitions and elemental diffusion in high-entropy alloy and nitride thin-film multilayers (2022)
- Engineering thermoelectric and mechanical properties by nanoporosity in calcium cobaltate films from reactions of Ca(OH)2/Co3O4 multilayers (2022)
- Synthesis of textured discontinuous-nanoisland Ca3Co4O9 thin films (2022)
- Mechanically Flexible Thermoelectric Hybrid Thin Films by Introduction of PEDOT:PSS in Nanoporous Ca3Co4O9 (2022)
- High thermoelectric power factor of pure and vanadium-alloyed chromium nitride thin films (2021)
- Phase Transformation and Superstructure Formation in (Ti0.5, Mg0.5)N Thin Films through High-Temperature Annealing (2021)
- An upgraded ultra-high vacuum magnetron-sputtering system for high-versatility and software-controlled deposition (2021)
- Phase formation and structural evolution of multicomponent (CrFeCo)1-yNy films (2021)
- Multicomponent TixNbCrAl nitride films deposited by dc and high-power impulse magnetron sputtering (2021)
- Influence of Metal Substitution and Ion Energy on Microstructure Evolution of High-Entropy Nitride (TiZrTaMe)N1–x (Me = Hf, Nb, Mo, or Cr) Films (2021)
- Engineering Faceted Nanoporosity by Reactions in Thin-Film Oxide Multilayers in Crystallographically Layered Calcium Cobaltate for Thermoelectrics (2021)
- Growth and optical properties of CaxCoO2 thin films (2021)
- The effects of microstructure, Nb content and secondary Ruddlesden–Popper phase on thermoelectric properties in perovskite CaMn1−xNbxO3 (x = 0–0.10) thin films (2020)
- Cobalt thin films as water-recombination electrocatalysts (2020)
- Effect of nitrogen content on microstructure and corrosion resistance of sputter-deposited multicomponent (TiNbZrTa)Nx films (2020)
- Microstructure and mechanical, electrical, and electrochemical properties of sputter-deposited multicomponent (TiNbZrTa)Nx coatings (2020)
- Growth and high temperature decomposition of epitaxial metastable wurtzite (Ti1-x,Al-x)N(0001) thin films (2019)
- Dislocation structure and microstrain evolution during spinodal decomposition of reactive magnetron sputtered heteroepixatial c-(Ti-0.37,Al-0.63)N/c-TiN films grown on MgO(001) and (111) substrates (2019)
- Formation mechanism and thermoelectric properties of CaMnO3 thin films synthesized by annealing of Ca0.5Mn0.5O films (2019)
- Synthesis and characterization of single-phase epitaxial Cr2N thin films by reactive magnetron sputtering (2019)
- Effect of impurities on morphology, growth mode, and thermoelectric properties of (111) and (001) epitaxial-like ScN films (2019)
- Microstructure and thermoelectric properties of CrN and CrN/Cr2N thin films (2018)
- P-type Al-doped Cr-deficient CrN thin films for thermoelectrics (2018)
- Effect of ion-implantation-induced defects and Mg dopants on the thermoelectric properties of ScN (2018)
- Effect of in-plane ordering on dielectric properties of highly {111}-oriented bismuth-zinc-niobate thin films (2017)
- Wet-cleaning of MgO(001) (2017)
- Reduction of the thermal conductivity of the thermoelectric material ScN by Nb alloying (2017)
- Study of ferroelectric/dielectric multilayers for tunable stub resonator applications at microwaves (2014)
- Loss Reduction Technique in Ferroelectric Tunable Devices by Laser Microetching. Application to a CPW Stub Resonator in X-Band (2014)
- Characterization in a Wide Frequency Range (40 MHz–67 GHz) of a KTa0.65Nb0.35O3 Thin Film for Tunable Applications (2014)
- Intercomparison of permittivity measurement techniques for ferroelectric thin layers (2014)
- Refined Characterization Up to Millimeter Waves of Ferroelectric KTN Thin Film for Efficient Integrated Tunable Devices (2013)
- Performance of frequency-agile CPW resonators on thin film ferroelectric material (2012)
- Ferroelectric and dielectric multilayer heterostructures based on KTa0.65Nb0.35O3 and Bi1.5-xZn0.92-yNb1.5O6.92–1.5x-y grown by pulsed laser deposition and chemical solution deposition for high frequency tunable devices (2012)
- Structural, Optical, and Dielectric Properties of Bi1.5–xZn0.92–yNb1.5O6.92−δ Thin Films Grown by PLD on R-plane Sapphire and LaAlO3 Substrates (2012)
- Highly tunable microwave stub resonator on ferroelectric KTa0.5Nb0.5O3 thin film (2011)