Leif Nyholm
Professor vid Institutionen för kemi - Ångström; Oorganisk kemi
- Telefon:
- 018-471 37 42
- Fax:
- 018-51 35 48
- E-post:
- Leif.Nyholm@kemi.uu.se
- Besöksadress:
- Lägerhyddsvägen 1
- Postadress:
- Box 538
751 21 Uppsala
Ladda ned kontaktuppgifter för Leif Nyholm vid Institutionen för kemi - Ångström; Oorganisk kemi
- Akademiska meriter:
- FD, Docent
Mer information visas för dig som medarbetare om du loggar in.
Publikationer
Senaste publikationer
- Anodic dissolution of aluminum in non-aqueous electrolyte solutions for sodium-ion batteries (2024)
- CO2-laser carbonization of polypyrrole/nanocellulose free-standing film for energy storage applications (2024)
- Fundamental Understanding and Quantification of Capacity Losses Involving the Negative Electrode in Sodium-Ion Batteries (2024)
- Near-surface analysis of magnetron sputtered AlCrNbYZrNx high entropy materials resolved by HAXPES (2024)
- Laser irradiation of photothermal precursors – a novel approach to produce carbon materials for supercapacitors (2024)
Alla publikationer
Artiklar
- Anodic dissolution of aluminum in non-aqueous electrolyte solutions for sodium-ion batteries (2024)
- Fundamental Understanding and Quantification of Capacity Losses Involving the Negative Electrode in Sodium-Ion Batteries (2024)
- Near-surface analysis of magnetron sputtered AlCrNbYZrNx high entropy materials resolved by HAXPES (2024)
- Laser irradiation of photothermal precursors – a novel approach to produce carbon materials for supercapacitors (2024)
- Influence of Lithium Diffusion into Copper Current Collectors on Lithium Electrodeposition in Anode‐Free Lithium‐Metal Batteries (2023)
- Revisiting the stability of aluminum current collectors in carbonate electrolytes for High-Voltage Li-ion batteries (2023)
- Magnetron sputtered high entropy alloy/amorphous carbon nanocomposite coatings (2023)
- Extending the Passive Region of CrFeNi-Based High Entropy Alloys (2023)
- Diffusion-Controlled Lithium Trapping in Graphite Composite Electrodes for Lithium-Ion Batteries (2022)
- Combinatorial design of amorphous TaNiSiC thin films with enhanced hardness, thermal stability, and corrosion resistance (2022)
- On the Use of Ti3C2Tx MXene as a Negative Electrode Material for Lithium-Ion Batteries (2022)
- Corrosion studies on multicomponent CoCrFeMnNi(C) thin films in acidic environments (2022)
- The effect of the Nb concentration on the corrosion resistance of nitrogen-containing multicomponent TiZrTaNb-based films in acidic environments (2022)
- Lithium-Diffusion Induced Capacity Losses in Lithium-Based Batteries (2022)
- Lithium electrodeposition for energy storage (2022)
- First-Cycle Oxidative Generation of Lithium Nucleation Sites Stabilizes Lithium-Metal Electrodes (2021)
- Probing Electrochemical Potential Differences over the Solid/Liquid Interface in Li-Ion Battery Model Systems. (2021)
- Process Window for Seeded Growth of Arrays of Quasi-Spherical Substrate-Supported Au Nanoparticles (2021)
- Capacity losses due to solid electrolyte interphase formation and sodium diffusion in sodium-ion batteries (2021)
- Strategies for Mitigating Dissolution of Solid Electrolyte Interphases in Sodium-Ion Batteries (2021)
- Influence of the nitrogen content on the corrosion resistances of multicomponent AlCrNbYZrN coatings (2021)
- Why Cellulose-Based Electrochemical Energy Storage Devices? (2021)
- Redox Buffering Effects in Potentiometric Detection of DNA Using Thiol-modified Gold Electrodes (2021)
- Enhancing corrosion resistance, hardness, and crack resistance in magnetron sputtered high entropy CoCrFeMnNi coatings by adding carbon (2021)
- On the Capacities of Freestanding Vanadium Pentoxide-Carbon Nanotube-Nanocellulose Paper Electrodes for Charge Storage Applications (2020)
- Seeded Growth of Large-Area Arrays of Substrate Supported Au Nanoparticles Using Citrate and Hydrogen Peroxide (2020)
- Lighter and safer (2020)
- Effect of nitrogen content on microstructure and corrosion resistance of sputter-deposited multicomponent (TiNbZrTa)N-x films (2020)
- Microstructure and mechanical, electrical, and electrochemical properties of sputter-deposited multicomponent (TiNbZrTa)N-x coatings (2020)
- Multi-component (Al,Cr,Nb,Y,Zr)N thin films by reactive magnetron sputter deposition for increased hardness and corrosion resistance (2020)
- Capacity Limiting Effects for Freestanding, Monolithic TiO2 Nanotube Electrodes with High Mass Loadings (2020)
- Estimating Detection Limits of Potentiometric DNA sensors Using Surface Plasmon Resonance Analyses (2020)
- Tailoring the Microstructure and Electrochemical Performance of 3D Microbattery Electrodes Based on Carbon Foams (2019)
- Cellulose Separators With Integrated Carbon Nanotube Interlayers for Lithium-Sulfur Batteries (2019)
- Molybdenum Oxide Nanosheets with Tunable Plasmonic Resonance (2019)
- Flexible Freestanding MoO3-x-Carbon Nanotubes-Nanocellulose Paper Electrodes for Charge-Storage Applications (2019)
- On the Capacity Losses Seen for Optimized Nano-Si Composite Electrodes in Li-Metal Half-Cells (2019)
- Sandwich-structured nano/micro fiber-based separators for lithium metal batteries (2019)
- Double-sided conductive separators for lithium-metal batteries (2019)
- Polydopamine-based redox-active separators for lithium-ion batteries (2019)
- Planar lithium (2019)
- Structural Changes of Mercaptohexanol Self-assembled Monolayers on Gold and their Influence on Impedimetric Aptamer Sensors (2019)
- Revisiting the factors influencing gold electrodes prepared using cyclic voltammetry (2019)
- High-Conductivity Reduced-Graphene-Oxide/Copper Aerogel for Energy Storage (2019)
- Cladophora Cellulose (2019)
- Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance (2018)
- Towards Li-ion batteries operating at 80 °C: Ionic liquid versus conventional liquid electrolytes (2018)
- Nanocellulose Modified Polyethylene Separators for Lithium Metal Batteries (2018)
- Dendrite-free lithium electrode cycling via controlled nucleation in low LiPF6 concentration electrolytes (2018)
- Lithium trapping in microbatteries based on lithium- and Cu2O-coated copper nanorods (2018)
- Towards Solid-State 3D-Microbatteries using Functionalized Polycarbonate-based Polymer Electrolytes (2018)
- Conducting Polymer Paper-Derived Mesoporous 3D N-doped Carbon Current Collectors for Na and Li Metal Anodes (2018)
- Redox-Active Separators for Lithium-Ion Batteries (2018)
- Nanocellulose Structured Paper-Based Lithium Metal Batteries (2018)
- Conducting polymer paper-derived separators for lithium metal batteries (2018)
- Nanocellulose based energy storage devices (2018)
- Lightweight, Thin, and Flexible Silver Nanopaper Electrodes for High-Capacity Dendrite-Free Sodium Metal Anodes (2018)
- Size-dependent Electrochemical Performance of Monolithic Anatase TiO2 Nanotube Anodes for Sodium-ion Batteries (2018)
- Over-Stoichiometric NbO2 Nanoparticles for a High Energy and Power Density Lithium Microbattery (2017)
- Overlapping and rate controlling electrochemical reactions for tin(IV) oxide electrodes in lithiu-ion batteries (2017)
- Elevated Temperature Lithium-Ion Batteries Containing SnO2 Electrodes and LiTFSI-Pip14TFSI Ionic Liquid Electrolyte (2017)
- Photoelectron Spectroscopic Evidence for Overlapping Redox Reactions for SnO2 Electrodes in Lithium-Ion Batteries (2017)
- Breaking Down a Complex System (2017)
- Systematic approach to the development of microfabricated biosensors (2017)
- The influence of nanoeffects on the oxidation of magnetron sputtered Cr-C/Ag thin films containing silver nanoparticles (2017)
- Thickness difference induced pore structure variations in cellulosic separators for lithium-ion batteries (2017)
- Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries (2017)
- Redox-active Separators for High-capacity Lithium-ion Batteries (2017)
- Cellulose-based Supercapacitors (2017)
- Boosting the thermal stability of emulsion–templated polymers via sulfonation (2016)
- Bioelectrodes based on pseudocapacitive cellulose/polypyrrole composite improve performance of biofuel cell (2016)
- Mesoporous Cladophora cellulose separators for lithium-ion batteries (2016)
- Solution-processed poly(3,4-ethylenedioxythiophene) nanocomposite paper electrodes for high-capacitance flexible supercapacitors (2016)
- On the electrochemistry of tin oxide coated tin electrodes in lithium-ion batteries (2015)
- Dispersed Gold Nanoparticles Supported in the Pores of Siliceous Mesocellular Foam (2015)
- Asymmetric and symmetric supercapacitors based on polypyrrole and activated carbon electrodes (2015)
- Biosupercapacitors for powering oxygen sensing devices (2015)
- Pseudocapacitive polypyrrole-nanocellulose composite for sugar-air enzymatic fuel cells (2015)
- Towards high throughput corrosion screening using arrays of bipolar electrodes (2015)
- Electrochemical fabrication and characterization of Cu/Cu2O multi-layered micro and nanorods in Li-ion batteries (2015)
- Asymmetric supercapacitors based on carbon nanofibre and polypyrrole/nanocellulose composite electrodes (2015)
- Surface Modified Nanocellulose Fibers Yield Conducting Polymer-Based Flexible Supercapacitors with Enhanced Capacitances (2015)
- Nanocellulose coupled flexible polypyrrole@graphene oxide composite paper electrodes with high volumetric capacitance (2015)
- Flexible freestanding Cladophora nanocellulose paper based Si anodes for lithium-ion batteries (2015)
- Conducting Polymer Paper-Based Cathodes for High-Areal-Capacity Lithium–Organic Batteries (2015)
- Hybrid Energy Storage Devices Based on Monolithic Electrodes Containing Well-defined TiO2 Nanotube Size Gradients (2015)
- Nanosized LiFePO4-decorated emulsion-templated carbon foam for 3D micro batteries (2014)
- Cooxidant-free TEMPO-mediated oxidation of highly crystalline nanocellulose in water (2014)
- Electrochemical TEMPO-mediated Oxidation of Highly Crystalline Nanocellulose in Water (2014)
- Tailoring porosities and electrochemical properties of composites composed of microfibrillated cellulose and polypyrrole (2014)
- The Buried Carbon/Solid Electrolyte Interphase in Li-ion Batteries Studied by Hard X-ray Photoelectron Spectroscopy (2014)
- On the evaluation of corrosion resistances of amorphous chromium carbide thin-films (2014)
- Benzenediacrylates as organic battery electrode materials (2014)
- Influence of deposition temperature and amorphous carbon on microstructure and oxidation resistance of magnetron sputtered nanocomposite Cr-C films (2014)
- Self-discharge Reactions in Energy Storage Devices Based on Polypyrrole-cellulose Composite Electrodes (2014)
- Activation Barriers Provide Insight into the Mechanism of Self-Discharge in Polypyrrole (2014)
- A Li-Ion Microbattery with 3D Electrodes of Different Geometries (2014)
- On the origin of the capacity fading for aluminium negative electrodes in Li-ion batteries (2014)
- On the electrophoretic and sol-gel deposition of active materials on aluminium rod current collectors for three-dimensional Li-ion micro-batteries (2014)
- Electrodeposition of Vanadium Oxide/Manganese Oxide Hybrid Thin Films on Nanostructured Aluminum Substrates (2014)
- The influence of electrode and separator thickness on the cell resistance of symmetric cellulose–polypyrrole-based electric energy storage devices (2014)
- The impact of size effects on the electrochemical behaviour of Cu2O-coated Cu nanopillars for advanced Li-ion microbatteries (2014)
- Freestanding nanocellulose-composite fibre reinforced 3D polypyrrole electrodes for energy storage applications (2014)
- Efficient high active mass paper-based energy-storage devices containing free-standing additive-less polypyrrole-nanocellulose electrodes (2014)
- High areal and volumetric capacity sustainable all-polymer paper-based supercapacitors (2014)
- A Comparative Study of the Effects of Rinsing and Aging of Polypyrrole/Nanocellulose Composites on Their Electrochemical Properties (2013)
- Corrosion Resistances and Passivation of Powder Metallurgical and Conventionally Cast 316L and 2205 Stainless Steels (2013)
- Cation profiling of passive films on stainless steel formed in sulphuric and acetic acid by deconvolution of angle-resolved X-ray photoelectron spectra (2013)
- Towards chip-based salinity measurements for small submersibles and biologgers (2013)
- Bipolar electrochemistry for high-throughput corrosion screening (2013)
- Electrochemical elaboration of electrodes and electrolytes for 3D structured batteries (2013)
- High energy and power density TiO2 nanotube electrodes for 3D Li-ion microbatteries (2013)
- Synthesis and characterization of a ferrocene-linked bis-fullerene[60] dumbbell (2012)
- Deposition and characterization of magnetron sputtered amorphous Cr-C films (2012)
- Conducting Nanocellulose Polypyrrole Membranes Intended for Hemodialysis (2012)
- Development of nanocellulose/polypyrrole composites towards blood purification (2012)
- Electroactive nanofibrillated cellulose aerogel composites with tunable structural and electrochemical properties (2012)
- Degradation effects in the extraction of antioxidants from birch bark using water at elevated temperature and pressure (2012)
- Manufacturing of anisotropic particles by site specific oxidation of thiols (2012)
- Electrochemical Synthesis of Gold and Protein Gradients on Particle Surfaces (2012)
- Haemocompatibility and ion exchange capability of nanocellulose polypyrrole membranes intended for blood purification (2012)
- In vitro and in vivo toxicity of rinsed and aged nanocellulose-polypyrrole composites (2012)
- Rapid Potential Step Charging of Paper-based Polypyrrole Energy Storage Devices (2012)
- Influence of the cellulose substrate on the electrochemical properties of paper-based polypyrrole electrode materials (2012)
- Paper-Based Energy-Storage Devices Comprising Carbon Fiber-Reinforced Polypyrrole-Cladophora Nanocellulose Composite Electrodes (2012)
- Current Instability for Silicon Nanowire Field-Effect Sensors Operating in Electrolyte with Platinum Gate Electrodes (2011)
- Electrodeposition as a Tool for 3D Microbattery Fabrication (2011)
- Fabrication of boron doped diamond microband electrodes for electrochemical detection in a microfluidic channel (2011)
- Toward Flexible Polymer and Paper-Based Energy Storage Devices (2011)
- Long cycle life nanocellulose polypyrrole electrodes (2011)
- Cycling stability and self-protective properties of a paper-based polypyrrole energy storage device (2011)
- Galvanostatic electrodeposition of aluminium nano-rods for Li-ion three-dimensional micro-battery current collectors (2011)
- High-capacity Conductive Nanocellulose Paper Sheets for Electrochemically Controlled Extraction of DNA Oligomers (2011)
- Voltammetric Determination of L-Dopa on Poly(3,4-ethylenedioxythiophene)-Single-Walled Carbon Nanotube Composite Modified Microelectrodes (2010)
- A Nanocellulose Polypyrrole Composite Based on Microfibrillated Cellulose from Wood (2010)
- Spatial Mapping of Elemental Distributions in Polypyrrole-Cellulose Nanofibers using Energy-Filtered Transmission Electron Microscopy (2010)
- Self-Supported Three-Dimensional Nanoelectrodes for Microbattery Applications (2009)
- Potential controlled anion absorption in a novel high surface area composite of Cladophora cellulose and polypyrrole (2009)
- Combined Extraction and Electrochemical Detection of Amines and Phenols Using Microelectrodes in Organic Solvents (2009)
- Ultrafast All-Polymer Paper-Based Batteries (2009)
- Influence of the type of oxidant on anion exchange properties of fibrous Cladophora cellulose/polypyrrole composites (2009)
- The Mechanism of Capacity Enhancement in LiFePO4 Cathodes Through Polyetheramine Coating (2009)
- Ionic motion in polypyrrole-cellulose composites (2009)
- Potential and Current Distributions at Electrodes intended for Bipolar Patterning (2009)
- Identification and Characterization of Polyphenolic Antioxidants Using On-Line Liquid Chromatography, Electrochemistry, and Electrospray Ionization Tandem Mass Spectrometry (2009)
- Oxidation of 4-chloroaniline studied by on-line electrochemistry electrospray ionization mass spectrometry (2009)
- Thin films of Cu2Sb and Cu9Sb2 as anode materials in Li-ion batteries (2008)
- Pulsed galvanostatic and potentiostatic electrodeposition of Cu and Cu2O nanolayers from alkaline Cu(II)-citrate solutions (2008)
- Current oscillations during chronoamperometric and cyclic voltammetric measurements in alkaline Cu(II)-citrate solutions (2008)
- A Novel High Specific Surface Area Conducting Paper Material Composed of Polypyrrole and Cladophora Cellulose (2008)
- On-Chip Electric Field Driven Electrochemical Detection Using a Poly(dimethylsiloxane) Microchannel with Gold Microband Electrodes (2008)
- Direct electrodeposition of aluminium nano-rods (2008)
- Formation of Molecular Gradients on Bipolar Electrodes (2008)
- Electrodeposition and electrochemical characterisation of thick and thin coatings of Sb and Sb/Sb2O3 particles for Li-ion battery anodes (2007)
- Electrodeposited Sb and Sb/Sb2O3 nanoparticle coatings as anode materials for Li-ion batteries (2007)
- On the origin of the spontaneous potential oscillations observed during galvanostatic deposition of layers of Cu and Cu2O in alkaline citrate solutions (2006)
- Lithium Insertion into Vanadium Oxide Nanotubes: Electrochemical and Structural Aspects (2006)
- The influence of the thin-layer flow cell design on the mass spectra when coupling electrochemistry to electrospray ionisation mass spectrometry (2006)
- On-line coupling of a microelectrode array equipped poly(dimethylsiloxane) microchip with an integrated graphite electrospray emitter for electrospray ionisation mass spectrometry (2005)
- On-line electrochemically controlled solid-phase extraction interfaced to electrospray and inductively coupled plasma mass spectrometry (2005)
- Electrochemical techniques for lab-on-a-chip applications (2005)
- Capillary electrophoresis coupled to mass spectrometry from a polymer modified poly(dimethylsiloxane) microchip with an integrated graphite electrospray tip (2005)
- Interference of the electrospray voltage on chromatographic separations using porous graphitic carbon columns (2004)
- In situ pH measurement of the self-oscillating Cu(II)-lactate system using an electropolymerised polyaniline film as a micro pH sensor (2003)
- Self-assembled monolayers of cystamine and cysteamine on gold studied by XPS and voltammetry (1999)
- A comparative study of the oxidation of 3-, 4- and 5-aminosalicylic acids at glassy carbon electrodes (1998)
- On-Line Deoxygenation for Reductive Electrochemical Detection of Artemisinin and Dihydroartemisinin in Liquid Chromatography (1998)
- Surface-oxidized NbO2 nanoparticles for high performance lithium microbatteries
- Emulsion-templated graphitic carbon foams with optimum porosity for 3D Li-ion microbatteries
- Electrochemical behavior of tin(IV) oxide electrodes in lithium-ion batteries at elevated temperatures
- Influence of the Particle Size on Diffusion-controlled Lithium Trapping in Silicon Nanoparticle Based Electrodes
- Early Mitigation of Diffusion-controlled Lithium Trapping for Improved High-rate Cycling of Lithium-ion Battery Cells
- Lithium trapping in freestanding TiO2 nanotube electrodes for lithium-ion batteries
- Comparing the electrochemical performances of TiO2 nanotube and nanoparticle based electrodes in lithium-ion batteries
- Self-discharge in an electric energy storage device based on polypyrrole-cellulose composite electrodes
- Temperature dependence of the self-discharge in polypyrrole-cellulose composite electrodes
- A Full 3D Li-ion Microbattery with Different Electrode Geometries
- On the Electrophoretic and Sol-gel Depostion of Active Materials on Aluminium Rod Current Collectors for Three-dimensional Li-ion Micro-batteries
- Polydopamine-based redox-active separator for lithium-ion batteries
- High entropy alloy/carbon nanocomposites: Influence of carbon on the mechanical properties and corrosion resistance
Konferenser
- CO2-laser carbonization of polypyrrole/nanocellulose free-standing film for energy storage applications (2024)
- Production of highly disordered carbon through CO2-laser carbonization of polypyrrole/Cladophora cellulose free-standing film for energy storage applications. (2023)
- Laser-induced carbonization of photothermal precursor as potential scalable approach to carbon material synthesis for energy storage applications (2023)
- Separators As a Tool for Enhanced Battery Performance (2019)
- Flexible Nanocellulose based Energy Storage Devices (2019)
- Electrochemical Analysis of Modified Separators for Li-S Batteries (2018)
- One-pot Synthesis of MoO3-x Nanosheets for Supercapacitor Applications (2018)
- Supercapacitors versus batteries (2018)
- Electrochemical Manufacturing and Characterisation of Nanostructured Electrodes for Lithium based Batteries (2018)
- Lithium Trapping in Alloy forming Electrodes and Current Collectors for Lithium based Batteries (2018)
- What if batteries could be made from paper (2018)
- Paper based electrodes suitable for disposable packaging (2018)
- Paper based energy storage devices (2018)
- Synthesis and characterization of HfNbTiVZr high entropy alloy thin films (2017)
- TiO2 nanoparticles versus nanotubes as lithium-ion battery electrode materials (2017)
- Impact of different pre-treatment methods on the cleanliness and functionalization of microfabricated gold surfaces aimed at biosensor applications (2017)
- Cladophora cellulose based separators for lithium-ion batteries (2017)
- Lithium trapping in alloy forming electrodes and current collectors for lithium based batteries (2017)
- Electrochemical behaviour of tin(IV) oxide electrodes in lithium-ion batteries at high temperature and potentials (2016)
- Mixed valence niobium oxides for high power 3D microbattery applications (2016)
- Manufacturing and electrochemical characterization of freestanding TiO2 nanotube electrodes for lithium-ion batteries (2016)
- Application of cellulose/conductive polymer paper as free standing matrix for enzyme immobilization in enzymatic fuel cell (2016)
- Electrochemical manufacturing and characterisation of nanostructured electrodes for lithium-ion batteries (2016)
- Improved cycling stability of conversion and alloying anodes through the use of nanomaterials (2016)
- Nanocellulose composites for soft capacitive storage (2016)
- Paper based flexible Si anodes for lithium ion batteries (2016)
- Free-Standing Oxide Nanotube Array Electrodes for High Energy Density and Power Density Li-Ion Batteries (2016)
- Anodic TiO2 Nanotube Array Electrodes for High Energy Density and Power Density Li-ion and Na-ion Battery Applications (2016)
- Electrochemical behavior of tin(IV) oxide electrodes in lithium-ion batteries at high potentials (2015)
- Electrochemical behaviour of tin(IV) oxide electrodes in lithium-ion batteries at high potentials (2015)
- Cooxidant-free TEMPO-mediated oxidation of highly crystalline Cladophora nanocellulose (2015)
- Designing 3D Microbatteries Using Emulsion-Templated Bicontinuous Carbon Foams with Optimum Void Sizes (2015)
- Manufacturing of TiO2 nanotubes for lithium-ion batteries (2015)
- Towards high-throughput Corrosion Screening using Bipolar Electrochemistry (2015)
- Electrodeposition – Fundamentals and challenges (2015)
- Nanocellulose/Conducting Polymer Composite Electrodes for Paper based Energy Storage Devices (2015)
- Aluminium rods as current collectors and electrodes for 3D Li-ion micro-batteries (2015)
- Cladophora Cellulose Membranes as Promising Lithium-Ion Battery Separators (2015)
- Electrochemical fabrication of 3D Cu/Cu2O multilayered nanostructures (2015)
- New ways to reduce self-discharge in Polypyrrole-based Energy Storage Devices (2015)
- Paper-Based Flexible Si anodes for Lithium-Ion Batteries (2015)
- Functionalized nanocellulose composites for lightweight flexible energy storage devices (2015)
- Paper based energy storage devices (2015)
- Paper based energy storage devices (2015)
- Paper based energy storage devices (2015)
- Conducting Polymer Paper-Based Cathode for Lithium Ion Batteries (2015)
- Binder-free oxide nanotube array electrodes for high energy density and power density Li-ion batteries (2015)
- Study of the Self-Discharge Mechanism in Polypyrrole (2014)
- Organic Battery Materials based on Conducting Polymer Backbones with High Capacity Pending Groups (2014)
- Influence of Separator and Electrode Thickness on Cell Resistance in Energy Storage Devices based on Polypyrrole-Cellulose Composites (2014)
- Influence of Separator and Electrode Thickness on Cell Resistance in Energy Storage Devices based on Polypyrrole-Cellulose Composites (2014)
- Towards blood purification applications of polypyrrole and cellulose nanocomposites (2013)
- Study of the Self-Discharge Mechanism in Polypyrrole (2013)
- Organic Energy Storage (2013)
- Electropolymerized Solid Polymer Electrolytes for Three-dimensional Microbatteries (2013)
- The Influence Of The Separator And Electrode Thickness On The Cell Resistance For Energy Storage Devices Based On Polypyrrole-Cellulose Composites (2013)
- Polypyrrole@nanocellulose Composites for Additive-Free, High Active Mass, Paper-Based Electrodes for Energy Storage Devices (2013)
- Conduting nanocellulose polypyrrole membranes intended for hemodialysis (2012)
- Development of Nanocellulose/Polypyrrole Composites Towards Blood Purification (2012)
- Hemocompatibility of Nanocellulose Polypyrrole Membranes Intended for Hemodialysis (2012)
- Quinone-Pyrrole-Polymer Materials for Organic Matter Based Energy Storage (2012)
- Quinone-Pyrrole-Polymer Materials for Organic Matter Based Energy Storage (2012)
- Stability of Polypyrrole Cellulose Composites in Aqueous Solutions and Under Ambient Conditions. (2011)
- Cellulose Composite Electrodes for Improved Cycling Stability of Polypyrrole (2011)
- Potential controlled ion-exchange membrane based on high surface area conducting paper composite for DNA separation (2011)
- Carbon Highways in High Surface Area Conducting Paper Membranes for Efficient DNA Separation. (2011)
- Electrochemically Controlled Separation of DNA Oligomers with High Surface Area Conducting Paper Electrode (2011)
- Energy storage and biomolecular extraction using polypyrrole coated cellulose nanofiber composites (2011)
- Stability of Cladophora Cellulose/Polypyrrole Nanocomposites in Aqueous solutions (2010)
- Salt and Paper Battery (2010)
- A battery from algae cellulose (2010)
- High Surface Area Conducting Paper Materials composed of Polypyrrole and Cladophora Cellulose (2010)
- High Surface Area Conducting Paper Materials composed of Polypyrrole and Cladophora Cellulose (2010)
- Rapid Energy Storage in High Surface Area Cellulose Polypyrrole Composite Electrodes (2010)
- High-Rate Redox Capacitor Based on Nanostructured Cellulose and Polypyrrole (2010)
- Long Cycle Life Nanocellulose Polypyrrole Electrodes (2010)
- The Salt and Paper Battery; Ultrafast and All-polymer Based. (2010)
- Influence of the Cellulose Substrate on the Electrochemical Properties of Paper Based Polypyrrole Composites (2010)
- Electrochemically controlled ion-exchange membrane based on high surface area conducting paper composite for separation of biomolecules (2010)
- Tracking Ion Distributions in Polypyrrole Coated Cellulose Nanofibers by means of Energy Filtered Transmission Electron Microscopy (2010)
- Tracking Ion Distributions in Polypyrrole Coated Cellulose Nanofibers by means of Energy Filtered Transmission Electron Microscopy (2010)
- Antioxidants studied by on-line hyphenation of liquid chromatography, electrochemistry and mass spectrometry (LCEC-MS/MS) (2009)
- High Surface Area Conducting Paper Materials composed of Polypyrrole and Cladophora Cellulose (2009)
- Nanostructured high-surface area conducting paper composites for multiple purpose applications including extraction of DNA and energy storage devices (2009)
- Electrodes Nano-Structures pour les Micro-Batteries Li-Ion Tredimensionelles (2009)
- On-Chip Electrochemical and Mass Spectrometric Detection (2009)
- Thin Electrolytes from Self-Assembly of Polyetheramine Oligomers on LiFePO4 Cathode Particles (2009)
- Micro-structure of Intermetallic Electrodes for Li-ion Batteries (2008)
- Electrochemical Deposition of Metal/Metal Oxide Nanomaterials based on Induced Local pH Variations (2008)
- Electrochemistry coupled to Electrospray Mass Spectrometry for the study of the Oxidation of 4-Chloroaniline (2008)
- On-Chip Electric Field Driven Electrochemical Detection (2008)
- Cu2Sb as anode material integrated into nano-structured Cu current collectors (2008)
- Growth of Aluminium Current Collectors for 3-Dimensional Microbattery Applications (2008)
- Controlled transport and release of sub-attomole of proteins and the lab-on-a-bead concept (2008)
- Formation and Imaging of Gradients in Electrochemical Reractions and Molecular Films (2008)
- Surface Gradients on Bipolar Electrodes (2008)
- The Reaction Mechanism of 4-Chloroaniline studied by Cyclic Voltammetry and Electrochemistry coupled to Electrospray Ionisation Mass Spectrometry (2008)
- The Influence on the SEI of Different Cell Designs (2006)
- Electrodeposited Nano-sized Thin Films of Sb and Sb2O3 as Anode Materials in Li-ion Batteries (2006)
- The role of the Oxide in Electrodeposited Nano-sized Thin Films of Sb (2006)
- On the Origin of the Spontaneous Potential Oscillations Observed during Galvanostatic Deposition of Layers of Cu and Cu2O in Alkaline Citrate Solutions (2006)
- Electrochemistry coupled to Electrospray Mass Spectrometry (2006)
- On- and off-Chip Electrochemistry coupled to Electrospray Mass Spectrometry (2006)
- Characterisation of the SEI formed on Graphite using Synchrotron PES (2005)
- Electronic and geometric structure of (Zn,Co)O room temperature Ferromagnets (2005)
- The Structural Response of Vanadium Oxide Nanotubes: an In Situ XRD Study (2005)
- Electrochemical Techniques for Lab-on-a-chip Applications (2005)
- Electrochemical Techniques for Lab-on-a-Chip Applications (2005)
- Electrochemistry Coupled to Electrospray Ionisation Mass Spectrometry (2005)
- Integrated on-chip electrophoresis and electrochemical detection of neurotransmitters (2004)
- Deviceless Decoupling of HV-field Effects on Integrated Amperometry in an On-Chip CE System (2004)
- Integrated On-Chip Electrophoresis and Electrochemical Detection of Neurotransmitters (2004)
- Electrochenmical Sample Pretreatment and Detection Techniques for Lab-on-a-Chip Applications (2004)
- On the coupling of Electrochemical Cells to Electrospray Ionisation Mass Spectrometry (2004)
- Electrochemical Microcontact Printing of Thiolated Silicon Surfaces by Generation Of Reactive Thiolsulfinates/Sulfonates (2004)
- Essential components in an integrated platform for on-site screening of anabolic androgenic steroids in biological samples (2004)
- Electrochemically Controlled Solid Phase Microextraction and Preconcentration using Polypyrrole Coated Microarray Electrodes in a Flow System (2003)
- Electrochemical Sample Pretreatment and Detection Techniques for Lab-on-a-Chip Applications (2003)
- A Novel Set-Up for the Coupling of a Thin Layer Electrochemical Cell to Electrospray Mass Spectrometry (2003)
- Design of a Chip Based Microanalytical Fluidic System Based on Electrochemical Detection using Redox Cycling (1999)
Patent
- Verbundmaterialien mit einem intrinsisch leitenden polymer und verfahren und einrichtungen (2020)
- Composite materials including an intrinsically conducting polymer, and methods and devices (2019)
- Composite materials including an intrinsically conducting polymer, and methods and devices (2015)
- Composite materials including an intrinsically conducting polymer, and methods and devices (2014)
- COMPOSITE MATERIALS INCLUDING AN INTRINSICALLY CONDUCTING POLYMER, AND METHODS AND DEVICES (2014)
- Partial derivatization of particles (2011)
- Composite materials for electrochemically controlled extraction, exchange, separation and actuation (2008)
- Composite materials for electrochemically controlled extraction, exchange, separation and actuation (2007)