Urban Wiklund

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Part of Tribology International, 2026

• DOI for A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Download full text (pdf) of A new mobile pendulum test for detailed wear mechanism studies of tillage tools

A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

Wojtowicz, Maria; Wiklund, Urban; Elo, Robin; Jacobson, Staffan

Part of Wear, 2026

• DOI for A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions
• Download full text (pdf) of A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Leviandhika, Vidhiaza; D'Elia, Francesco; Shtender, Vitalii; Mellin, P. et al.

Part of Journal of Materials Research and Technology, p. 2352-2363, 2025

• DOI for Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam
• Download full text (pdf) of Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, 2025

• DOI for The influence of oxygen on the wear of WC-Co sliding against copper
• Download full text (pdf) of The influence of oxygen on the wear of WC-Co sliding against copper

On the tool wear reducing mechanism of Zn in brass alloys

Ekholm, Felix; Heinrichs Lindgren, J.; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2025

• DOI for On the tool wear reducing mechanism of Zn in brass alloys
• Download full text (pdf) of On the tool wear reducing mechanism of Zn in brass alloys

A new mobile pendulum test for detailed wear mechanism studies of tillage tools

Wojtowicz, Maria; Elo, Robin; Heinrichs Lindgren, Jannica; Wiklund, Urban et al.

Part of Tribology International, 2026

• DOI for A new mobile pendulum test for detailed wear mechanism studies of tillage tools
• Download full text (pdf) of A new mobile pendulum test for detailed wear mechanism studies of tillage tools

A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

Wojtowicz, Maria; Wiklund, Urban; Elo, Robin; Jacobson, Staffan

Part of Wear, 2026

• DOI for A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions
• Download full text (pdf) of A new experimental technique for assessing impact-sliding wear resistance of materials for non-synchronous transmissions

Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Leviandhika, Vidhiaza; D'Elia, Francesco; Shtender, Vitalii; Mellin, P. et al.

Part of Journal of Materials Research and Technology, p. 2352-2363, 2025

• DOI for Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam
• Download full text (pdf) of Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

The influence of oxygen on the wear of WC-Co sliding against copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of International journal of refractory metals & hard materials, 2025

• DOI for The influence of oxygen on the wear of WC-Co sliding against copper
• Download full text (pdf) of The influence of oxygen on the wear of WC-Co sliding against copper

On the tool wear reducing mechanism of Zn in brass alloys

Ekholm, Felix; Heinrichs Lindgren, J.; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2025

• DOI for On the tool wear reducing mechanism of Zn in brass alloys
• Download full text (pdf) of On the tool wear reducing mechanism of Zn in brass alloys

Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments

Hassila, Carl Johan; Malmelov, Andreas; Andersson, Carl; Hektor, Johan et al.

Part of Materials, 2024

• DOI for Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments
• Download full text (pdf) of Influence of Scanning Strategy on Residual Stresses in Laser-Based Powder Bed Fusion Manufactured Alloy 718: Modeling and Experiments

Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Heinrichs, Jannica; Mikado, H.; Donzel-Gargand, Olivier; Surreddi, K. B. et al.

Part of Wear, 2024

• DOI for Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools
• Download full text (pdf) of Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools

Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear

Holmberg, Jonas; Berglund, Johan; Brohede, Ulrika; Åkerfeldt, Pia et al.

Part of The International Journal of Advanced Manufacturing Technology, p. 1823-1842, 2024

• DOI for Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear
• Download full text (pdf) of Machining of additively manufactured alloy 718 in as-built and heat-treated condition: surface integrity and cutting tool wear

Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan et al.

Part of Wear, 2023

• DOI for Wear of cemented carbide tools in a copper alloy forging process: Verification of a new lab test

Crack initiation and early propagation in case hardened sintered PM steels under cyclic load

Holmberg, Anders; Wiklund, Urban; Isaksson, Per; Kassman Rudolphi, Åsa

Part of Powder Metallurgy, p. 164-175, 2023

• DOI for Crack initiation and early propagation in case hardened sintered PM steels under cyclic load
• Download full text (pdf) of Crack initiation and early propagation in case hardened sintered PM steels under cyclic load

Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625

Malmelöv, Andreas; Hassila, Carl Johan; Fisk, Martin; Wiklund, Urban et al.

Part of Materials & design, 2022

• DOI for Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625
• Download full text (pdf) of Numerical modeling and synchrotron diffraction measurements of residual stresses in laser powder bed fusion manufactured alloy 625

Wear of cemented carbide forging dies used in zipper production

Heinrichs, Jannica; Mikado, H.; Wiklund, Urban; Kawamura, S. et al.

Part of Wear, 2022

• DOI for Wear of cemented carbide forging dies used in zipper production
• Download full text (pdf) of Wear of cemented carbide forging dies used in zipper production

Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process

Hassila, C.J.; Paschalidou, Eirini-Maria; Harlin, P.; Wiklund, Urban

Part of Materials & design, p. 110928-110928, 2022

• DOI for Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process
• Download full text (pdf) of Potential of nitrogen atomized alloy 625 in the powder bed fusion laser beam process

Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Heinrichs, Jannica; Mikado, Hiroko; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2021

• DOI for Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper
• Download full text (pdf) of Wear of uncoated and PVD coated cemented carbide tools for processing of copper based materials part II: Exploring the sliding contact with pure copper

Defibration mechanisms and energy consumption in the grinding zone: a lab scale equipment and method to evaluate groundwood pulping tools

Heldin, Magnus; Wiklund, Urban

Part of Nordic Pulp & Paper Research Journal, p. 25-33, 2020

• DOI for Defibration mechanisms and energy consumption in the grinding zone: a lab scale equipment and method to evaluate groundwood pulping tools
• Download full text (pdf) of Defibration mechanisms and energy consumption in the grinding zone: a lab scale equipment and method to evaluate groundwood pulping tools

Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale

Carlsson, Jenny; Heldin, Magnus; Isaksson, Per; Wiklund, Urban

Part of Holzforschung, p. 477-487, 2020

• DOI for Investigating tool engagement in groundwood pulping: finite element modelling and in-situ observations at the microscale

Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

Mikado, Hiroko; Heinrichs, Jannica; Wiklund, Urban; Jacobson, Staffan

Part of Wear, 2020

• DOI for Wear of Uncoated and PVD Coated Cemented Carbide Tools for Processing of Copper Based Materials Part I: Lab test verification in dry and lubricated sliding

The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

Marattukalam, Jithin James; Karlsson, Dennis; Pacheco, Victor; Beran, Přemysl et al.

Part of Materials & design, 2020

• DOI for The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS
• Download full text (pdf) of The effect of laser scanning strategies on texture, mechanical properties, and site-specific grain orientation in selective laser melted 316L SS

Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings

Goel, Sneha; Bjorklund, Stefan; Curry, Nicholas; Govindarajan, Sivakumar et al.

Part of Applied Sciences, 2020

• DOI for Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings
• Download full text (pdf) of Axial Plasma Spraying of Mixed Suspensions: A Case Study on Processing, Characteristics, and Tribological Behavior of Al2O3-YSZ Coatings

Influences of load and temperature on groundwood pulping with well-defined tools

Heldin, Magnus; Wiklund, Urban

Part of Wear, 2019

• DOI for Influences of load and temperature on groundwood pulping with well-defined tools
• Download full text (pdf) of Influences of load and temperature on groundwood pulping with well-defined tools

Evaluation of well-defined tool surface designs for groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of BioResources, p. 9575-9587, 2019

• DOI for Evaluation of well-defined tool surface designs for groundwood pulping
• Download full text (pdf) of Evaluation of well-defined tool surface designs for groundwood pulping

Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

Hassila, Carl Johan; Harlin, P.; Wiklund, Urban

Part of Wear, p. 1837-1845, 2019

• DOI for Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625
• Download full text (pdf) of Rolling contact fatigue crack propagation relative to anisotropies in additive manufactured Inconel 625

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Heinrichs, Jannica; Mikado, H.; Kawakami, A.; Wiklund, Urban et al.

Part of Wear, p. 96-107, 2019

• DOI for Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire in zipper production

Comparison of test methods estimating the stiffness of ultrathin coatings

Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

Part of Journal of Coatings Technology and Research, p. 743-752, 2018

• DOI for Comparison of test methods estimating the stiffness of ultrathin coatings
• Download full text (pdf) of Comparison of test methods estimating the stiffness of ultrathin coatings

Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

Grandin, Martina; Wiklund, Urban

Part of Tribology International, p. 1-9, 2018

• DOI for Influence of mechanical and electrical load on a copper/copper-graphite sliding electrical contact

Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 227-235, 2018

• DOI for Wear phenomena and tribofilm formation of copper/copper-graphite sliding electrical contact materials

Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

Sun, Fengzhen; Wiklund, Urban; Aviles, F.; Gamstedt, E. Kristofer

Part of Composites Science And Technology, p. 95-102, 2017

• DOI for Assessing local yield stress and fracture toughness of carbon nanotube poly(methyl methacrylate) composite by nanosectioning

Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Wear, p. 9-17, 2017

• DOI for Effect of combined additions of Si, Mn, Cr and Al to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Goel, S.; Bjorklund, S.; Curry, N.; Wiklund, Urban et al.

Part of Surface & Coatings Technology, p. 80-87, 2017

• DOI for Axial suspension plasma spraying of Al2O3 coatings for superior tribological properties

Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Tribology International, p. 414-424, 2016

• DOI for Influence of Mn and Al additions to carbon steel on material transfer and coating damage mechanism in a sliding contact between steel and TiN coated HSS tool

Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling

Aiso, Toshiharu; Wiklund, Urban

Part of Tribology - Materials, Surfaces & Interfaces, p. 107-116, 2016

• DOI for Influence of contact parameters on material transfer from steel to TiN coated tool: optimisation of a sliding test for simulation of material transfer in milling

Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

Heldin, Magnus; Isaksson, Per; Wiklund, Urban

Part of Nordic Pulp & Paper Research Journal, p. 401-406, 2016

• Download full text (pdf) of Initiation of wood defibration in groundwood pulping, single asperity indentation and scratching

Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 138-147, 2016

• DOI for Wear and electrical performance of a slip-ring system with silver-graphite in continuous sliding against PVD coated wires

Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Tribology International, p. 337-348, 2016

• DOI for Effect of Si and Cr additions to carbon steel on material transfer in a steel/TiN coated tool sliding contact

Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

Mao, Fang; Taher, Mamoun; Kryshtal, Oleksandr; Kruk, Adam et al.

Part of ACS Applied Materials and Interfaces, p. 30635-30643, 2016

• DOI for Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties
• Download full text (pdf) of Combinatorial Study of Gradient Ag-Al Thin Films: Microstructure, Phase Formation, Mechanical and Electrical Properties

Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

Aiso, Toshiharu; Wiklund, Urban; Kubota, Manabu; Jacobson, Staffan

Part of Wear, p. 379-389, 2016

• DOI for Effect of Si and Al additions to carbon steel on material transfer and coating damage mechanism in turning with CVD coated tools

Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

Grandin, Martina; Nedfors, Nils; Sundberg, Jill; Jansson, Ulf et al.

Part of Surface & Coatings Technology, p. 210-218, 2015

• DOI for Ti-Ni-C nanocomposite coatings evaluated in a sliding electrical contact application

Graphene as a lubricant on Ag for electrical contact applications

Mao, Fang; Wiklund, Urban; Andersson, Anna M.; Jansson, Ulf

Part of Journal of Materials Science, p. 6518-6525, 2015

• DOI for Graphene as a lubricant on Ag for electrical contact applications
• Download full text (pdf) of Graphene as a lubricant on Ag for electrical contact applications

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Gustavsson, Fredrik; Collin, Marianne; Gunilla, Andersson et al.

Part of Journal of Materials Processing Technology, p. 1467-1481, 2014

• DOI for Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Heinrichs, Jannica; Gerth, Julia; Thersleff, Thomas; Bexell, Ulf et al.

Part of Tribology International, p. 55-64, 2013

• DOI for Influence of sliding speed on modes of material transfer as steel slides against PVD tool coatings

Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

Part of Surface & Coatings Technology, p. 48-54, 2013

• DOI for Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings
• Download full text (pdf) of Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Grandin, Martina; Wiklund, Urban

Part of Wear, p. 1481-1491, 2013

• DOI for Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Solution-based synthesis of AgI coatings for low-friction applications

Sundberg, Jill; Mao, Fang; Andersson, Anna M.; Wiklund, Urban et al.

Part of Journal of Materials Science, p. 2236-2244, 2013

• DOI for Solution-based synthesis of AgI coatings for low-friction applications

Nanoindentation on micro pillars for determination of intrinsic hardness and residual stress in coatings deposited on complex geometries

Andre, Benny; Hollman, Patrik; Wiklund, Urban

Part of Tribologia, p. 22-31, 2012

Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Gerth, Julia; Heinrichs, Jannica; Nyberg, Harald; Larsson, Mats et al.

Part of Tribology International, p. 153-160, 2012

• DOI for Evaluation of an intermittent sliding test for reproducing work material transfer in milling operations

Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Heinrichs, Jannica; Gerth, Julia; Bexell, Ulf; Larsson, Mats et al.

Part of Tribology International, p. 9-18, 2012

• DOI for Influence from surface roughness on steel transfer to PVD tool coatings in continuous and intermittent sliding contacts

Friction and contact resistance of nanocomposite Ti-Ni-C coatings

André, Benny; Lewin, Erik; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 555-566, 2011

• DOI for Friction and contact resistance of nanocomposite Ti-Ni-C coatings

Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

Wiklund, Urban; Rubino, Stefano; Kádas, Krisztina; Skorodumova, Natalia V. et al.

Part of Acta Materialia, p. 68-74, 2011

• DOI for Experimental and theoretical studies on stainless steel transfer onto a TiN-coated cutting tool

Design of carbide-based nanocomposite thin films by selective alloying

Jansson, Ulf; Lewin, Erik; Råsander, Mikael; Eriksson, Olle et al.

Part of Surface & Coatings Technology, p. 583-590, 2011

• DOI for Design of carbide-based nanocomposite thin films by selective alloying

On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

Part of Wear, p. 204-2057, 2011

• DOI for On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

Survey of damage mechanisms on PVD coated HSS hobs used in Swedish gear manufacturing industry

Gerth, Julia; Larsson, Mats; Urban, Wiklund

Part of Tribologia, p. 37-50, 2011

Synthesis, structure and properties of Ni-alloyed TiC_x-based thin films

Lewin, Erik; André, Benny; Urbonaite, Sigita; Wiklund, Urban et al.

Part of Journal of Materials Chemistry, p. 5950-5960, 2010

• DOI for Synthesis, structure and properties of Ni-alloyed TiC_x-based thin films

Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

Wilhelmsson, Ola; Bijelovic, Stojanka; Lindquist, Mattias; André, Benny et al.

Part of Thin Solid Films, p. 2607-2616, 2010

• DOI for Deposition and characterization of magnetic Ti–Fe–C nanocomposite thin films

Conductive nanocomposite ceramics as tribological and electrical contact materials

Öberg, Å.; Kassman, Åsa; André, Benny; Wiklund, Urban et al.

Part of European Physical Journal, p. 22902, 2010

• DOI for Conductive nanocomposite ceramics as tribological and electrical contact materials

Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 988-994, 2009

• DOI for Tribofilm formation from TiC and nanocomposite TiAlC coatings, studied with Focused Ion Beam and Transmission Electron Microscopy

The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

Coronel, E; Wiklund, Urban; Olsson, E

Part of Thin Solid Films, p. 71-76, 2009

• DOI for The effect of carbon content on the microstructure of hydrogen-free physical vapour deposited titanium carbide films

Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

Lindgren, M; Åstrand, M; Wiklund, Urban; Engqvist, Håkan

Part of Journal of materials science. Materials in medicine, p. 1401-1408, 2009

• DOI for Investigation of boundary conditions for biomimetic HA deposition on titanium oxide surfaces

Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

Lindquist, Mattias; Wilhelmsson, Ola; Jansson, Ulf; Wiklund, Urban

Part of Wear, p. 379-387, 2009

• DOI for Tribofilm formation and tribological properties of TiC and nanocomposite TiAlC coatings

On the wear of PVD-coated HSS hobs in dry gear cutting

Gerth, Julia; Larsson, Mats; Wiklund, Urban; Riddar, Frida et al.

Part of Wear, p. 444-452, 2009

• DOI for On the wear of PVD-coated HSS hobs in dry gear cutting

Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

Part of Wear, p. 2257-2268, 2009

• DOI for Reproducing wear mechanisms in gear hobbing: Evaluation of a single insert milling test

Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

Holmberg, Kenneth; Ronkainen, Helena; Laukkanen, Anssi; Wallin, Kim et al.

Part of Wear, p. 2142-2156, 2009

• DOI for Residual stresses in TiN, DLC and MoS2 coated surfaces with regard to their tribological fracture behaviour

The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

Nilsson, D; Stavlid, N; Lindquist, M; Hogmark, Sture et al.

Part of Surface and Coatings Technology, p. 2989-2994, 2009

• DOI for The role of aluminum additions in the oxidation and wear of a TaC:C low-friction coating

Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

Lewin, Erik; Olsson, Erik; André, Benny; Joelsson, Torbjörn et al.

Part of Plasma Processes and Polymers, 2009

• DOI for Industrialisation Study of Nanocomposite nc-TiC/a-C Coatings for Electrical Contact Applications

Physical vapour deposition and bioactivity of crystalline titanium dioxide thin films

Heinrichs, Jannica; Jarmar, Tobias; Wiklund, Urban; Engqvist, Håkan

Part of Trends in Biomaterials & Artificial Organs, p. 104-110, 2008

Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

Casas, B.; Wiklund, Urban; Lanes, L.M.; Hogmark, Sture

Part of Wear, p. 490-496, 2008

• DOI for Adhesion and abrasive wear resistance of TiN deposited on electrical discharge machined WC-Co cements rbides

Design of Nanocomposite Low-Friction Coatings

Wilhelmsson, Ola; Råsander, Mikael; Carlsson, Mattias; Lewin, Erik et al.

Part of Advanced Functional Materials, p. 1611-1616, 2007

• DOI for Design of Nanocomposite Low-Friction Coatings

The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

Gerth, Julia; Wiklund, Urban

Part of Wear, p. 885-892, 2007

• DOI for The influence of metallic interlayers on the adhesion of pVD TiN coatings on high-speed steel

A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

Nilsson, Daniel; Wiklund, Urban

Part of Thin Solid Films, p. 10-15, 2004

• DOI for A flexible laboratory-scale approach to alloying and tailoring of thin films by single-magnetron co-sputtering

Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

Longtin, R; Fauteux, C; Coronel, Ernesto; Wiklund, Urban et al.

Part of Appl. Phys. A, p. 573-577, 2004

• DOI for Nanoindentation of carbon microfibers deposited by laser-assisted chemical vapor deposition

A comparative evaluation method for low friction coatings in dry sliding thrust bearings

Carlsson, Mattias; Wiklund, Urban

Part of Tribologia, p. 27-36, 2004

Novel load-carrying layers to support low-friction PVD coatings

Westergård, Rickard; Svahn, Fredrik; Wiklund, Urban

Part of Surface and Coatings Technology, p. 14-22, 2003

Novel load-carrying layers to support low-friction PVD coatings

Westergård, Richard; Svahn, Fredrik; Wiklund, Urban

Part of Surface and Coatings Technology, p. 14-22, 2003

Low-friction carbon-rich carbide coatings deposited by co-sputtering

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003

Low-friction carbon-rich carbide coatings deposited by co-sputtering

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003

Low-friction carbon-rich carbide coatings deposited by co-sputtering

Nilsson, Daniel; Svahn, Fredrik; Wiklund, Urban; Hogmark, Sture

Part of Wear, p. 1084-1091, 2003

Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

Crossley, A; Johnston, C; Hutchings, I M; Myhra, S et al.

Part of Thin Solid Films, p. 224-230, 2002

• DOI for Surface treatment for galling protection of titanium alloys: characterization by surface-specific electron and Raman spectroscopies

Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

Gunnars, J; Wiklund, U

Part of Materials Science and Engineering A, p. 7-21, 2002

• DOI for Determination of growth-induced strain and thermoelastic properties of coatings by curvature measurements

Evaluation of a flexible physical vapor deposited TiC-C coating system

Wiklund, U; Nordin, M; Wänstrand, O; Larsson, M

Part of Surface & Coatings Technology, p. 154-161, 2000

• DOI for Evaluation of a flexible physical vapor deposited TiC-C coating system

Mapping of mechanical properties of WC-Co using nanoindentation

Engqvist, Håkan; Wiklund, Urban

Part of Tribology letters, p. 147-152, 2000

• DOI for Mapping of mechanical properties of WC-Co using nanoindentation

The multilayer effect in abrasion: optimising the combination of hard and tough phases

Berger, M; Wiklund, U; Eriksson, M; Engqvist, H et al.

Part of Surface & Coatings Technology, p. 1138-1144, 1999

• DOI for The multilayer effect in abrasion: optimising the combination of hard and tough phases

Influence of residual stresses on fracture and delamination of thin hard coatings

Wiklund, U; Gunnars, J; Hogmark, S

Part of Wear, p. 262-269, 1999

• DOI for Influence of residual stresses on fracture and delamination of thin hard coatings

Corrosion behaviour of Ti/TiN multilayer coated tool steel

Herranen, Merja; Wiklund, U; Carlsson, Jan-Otto; Hogmark, S

Part of SURFACE & COATINGS TECHNOLOGY, p. 191-196, 1998

Cracking resistance of thin hard coatings estimated by four-point bending

Wiklund, U; Bromark, M; Larsson, M; Hedenqvist, P et al.

Part of Surface and coatings technology, p. 57-63, 1997

• DOI for Cracking resistance of thin hard coatings estimated by four-point bending

Tribofilm formation from TiC and nanocomposite TiAlC coatings, analysis by means of FIB and TEM

Lindquist, M.; Wilhelmsson, O.; Jansson, U.; Wiklund, U.

Novel load carrying layers to support low friction PVD coatings

Westergård, R; Svahn, F; Wiklund, Urban

Part of Surf. Coat. Technol.

The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)

Wahlund, Jan-Erik; Bergman, Jan E. S.; Åhlén, Lennart; Puccio, Walter et al.

Part of Space Science Reviews, 2025

• DOI for The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)
• Download full text (pdf) of The Radio & Plasma Wave Investigation (RPWI) for the JUpiter ICy moons Explorer (JUICE)

Mechanical and tribological requirements and evaluation of coating composites

Hogmark, S; Jacobson, S; Larsson, M; Wiklund, Urban

Part of Modern Tribology Handbook, p. 931-960, CRC Press, 2001

The Effect of Oxygen on the Chemical Wear of Cemented Carbides in Sliding Contact Against Copper

Ekholm, Felix; Heinrichs Lindgren, Jannica; Wiklund, Urban; Jacobson, Staffan

2024

Semi in-situ measurement of microstructural changes in PM steel during indentation

Holmberg, Anders; Andersson, Michael; Wiklund, Urban; Kassman Rudolphi, Åsa

Part of Euro PM2021 Proceedings, 2021

• Download full text (pdf) of Semi in-situ measurement of microstructural changes in PM steel during indentation

Influence of Nitrogen Content on Microstructure and Mechanical Properties of Laser Powder Bed Fusion Processed Alloy 625

Hassila, Carl Johan; Harlin, Peter; Wiklund, Urban

Part of World PM 2020, 27/6-1/7 2020, Montreal, Kanada, 2020

On tool engagement in groundwood pulping - in-situ observations and numerical modelling at the microscale

Heldin, Magnus; Carlsson, Jenny; Isaksson, Per; Wiklund, Urban

Part of The 11th Fundamental Mechanical Pulp Research Seminar, Norrköping, Sweden, April 2-4, 2019

Initiation wear of cemented carbide tools used in copper processing -: evaluated in sliding contact

Hiroko, Mikado; Heinrichs, Jannica; Wiklund, Urban; Kawamura, Shingo et al.

Part of Proceedings of International Conference on the Science of Hard Materials, Khao Lak, Thailand, 2019

Wear mechanisms of tools for exploration drilling

Wiklund, Urban; Emy, Guttenkunst; Grandin, Martina; Toller, Lisa

Part of Euromat 2019, Stockholm, Sweden, p. 787, 2019

Rolling contact fatigue test performed on additively manufactured inconel 718 produced by selective laser melting

Hassila Karlsson, Carl Johan; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018

Abrasion resistance of new wear resistant AM steels

Söderbäck, Per; Beste, Ulrik; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018

Abrasion resistance of drill bit steels in flowing saltwater

Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018, 2018

Tribo-chemical wear testing of rock drill inserts

Jacobson, Felix; Norgren, Susanne; Wiklund, Urban

Part of The 18th Nordic Symposium on Tribology - Nordtrib 2018, Uppsala, Sweden, June 18-21, 2018, 2018

Influences of grinding surface alignment in groundwood pulping of Norway spruce

Heldin, Magnus; Wiklund, Urban

Part of 18th Nordic Symposium on Tribology - NORDTRIB 2018, Uppsala, Sweden, June 18-21, 2018

Wear mechanisms of WC-Co cemented carbide tools and PVD coated tools used for shearing Cu-alloy wire

Heinrichs, Jannica; Kawakami, Ayumi; Mikado, Hiroko; Wiklund, Urban et al.

2018

Tailored grinding surfaces for groundwood pulping - influencing wear mechanisms and energy requirements

Heldin, Magnus; Wiklund, Urban

Part of 21st International Conference on Wear of Materials, Long Beach, March 26-30, 2017

Comparison of experimental methods to characterize Young’s modulus of ultrathin coatings on polymer films

Tavares da Costa, Marcus Vinicius; Bolinsson, Jessica; Neagu, Cristian; Fayet, Pierre et al.

2017

Micrometre compressions to facilitate controlled wear in groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of 17th Nordic Symposium on Tribology - Nordtrib, Hämeenlinna, Finland, 14-17 June, 2016

Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

Tavares da Costa, Marcus Vinicius; Neagu, Cristian; Fayet, Pierre; Wiklund, Urban et al.

2016

• Download full text (pdf) of Fragmentation and Adhesion of Thin Metal Oxide Coatings on Polymer Films

Designed tools for controlling the defibration mechanisms in the pressure groundwood process

Heldin, Magnus; Wiklund, Urban

Part of International Tribology Conference, Tokyo 2015, Tokyo, Japan, September 16-20, 2015

A labscale test equipment ot study the tool surface influence in pressure groundwood pulping

Heldin, Magnus; Wiklund, Urban

Part of 20th International Conference on Wear of Materials, Toronto, Canada, April 12-16, 2015

A method for tribological evaluation of gradient surfaces

Nyberg, Harald; Grandin, Martina; Wiklund, Urban; Jacobson, Staffan

2014

Initiation of wood defibration, tribology at the fiber level

Heldin, Magnus; Wiklund, Urban; Isaksson, Per

Part of Nordtrib, Aarhus, Denmark, June 10-13, 2014

Scratch testing for mimicking the early stage of wood defibration

Heldin, Magnus; Wiklund, Urban

Part of Asiatrib, Agra, India, February 17-20, 2014

A wear tolerant slip-ring assembly, individual spring-wire brushes in a v-grooved metal-graphite ring

Grandin, Martina; Wiklund, Urban

Part of Proceedings of the 27th International Conference on Electrical Contacts, p. 237-243, 2014

Friction, wear and tribofilm formation on electrical contact materials in reciprocating sliding against silver-graphite

Grandin, Martina; Wiklund, Urban

2013

Design of low-friction PVD coating systems with enhanced running-in performance - carbon overcoats on TaC/aC coatings

Nyberg, Harald; Tokoroyama, Takayuki; Wiklund, Urban; Jacobson, Staffan

Part of Nordtrib 2012, 15th Nordic Symposium on Tribology, 2012

On the residual stresses vs. hardness of tribological surfaces

Hogmark, Sture; Smid, Michal; Coronel, Ernesto; Wiklund, Urban

2012

Adhesion phenomena in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Collin, Marianne; Andersson, Gunilla; Nordh, Lars-Göran et al.

2012

Adhesion properties in the secondary shear zone in turning of austenitic stainless steel and carbon steel

Gerth, Julia; Wiklund, Urban

2012

Tribological requirements for selection of new materials for electrical connectors

Kassman Rudolphi, Åsa; Wiklund, Urban

Part of NordTrib 2012, Trondheim, Norge, 2012

On the influence from micro topography of PVD coatings on friction behaviour, material transfer and tribofilm formation

Olofsson, Johanna; Gerth, Julia; Nyberg, Harald; Wiklund, Urban et al.

2011

Nanoindentation on micro pillars for determination of residual stress conditions of PVD coatings

André, Benny; Wiklund, Urban

2011

Nanocomposite Ti-Ni-C Coatings for Electrical Contact Brush Applications

Malmros, Martina; Wiklund, Urban

2011

Assessing the mechanical and electrical properties of aluminium oxide on aluminium using nanoindentation and nanoscratching

Malmros, Martina; Olsson, Mikael; Bexell, Ulf; Wiklund, Urban

2011

Influence on surface micro topography of HSS surfaces from argon ion etch cleaning

Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

2010

Friction and wear dependence of nc-TiNiC:a-C by environment and test conditions

André, Benny; Wiklund, Urban

2010

On the influence from micro topography on the structure and growth of low friction amorphous carbon PVD coatings

Nyberg, Harald; Olofsson, Johanna; Gerth, Julia; Wiklund, Urban et al.

Part of Twelfth International Conference on Plasma Surface Engineering (PSE 2010), September 13-17, 2010, Garmisch-Partenkirchen, 2010

Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

Part of 17th International Microscopy Congress - Rio de Janeiro19-24 September 2010, 2010

Electron Microscopy studies on stainless steel transfer onto a TiN coated cutting tool

Rubino, Stefano; Wiklund, Urban; Kádas, Krisztina; Skorodumova, Natalia V. et al.

2010

Nanocomposite Coatings for Contact Brush Applications

Malmros, Martina; Wiklund, Urban

Part of Proceedings of the 4th International Tribology Congress, ASIATRIB2010, 2010

Wear of an AlCrN coated HSS Hob in Dry Gear Cutting

Gerth, Julia; Wiklund, Urban

Part of HSS FORUM - Smart Solutions for the Future of Metal Cutting, 2009

Conductive nanocomposite ceramics as tribological and electrical contact materials

Öberg, Åke; Kassman Rudolphi, Åsa; Wiklund, Urban; André, Benny et al.

Part of International Conference on Electrical Contacts, ICEC 2008, 2008

Tribological testing of ceramic coatings boosted for low friction and for use in electrical contacts

André, Benny; Lewin, Erik; Lindquist, Mattias; Jansson, Ulf et al.

2008

Residual stresses in TiN, DLC and MoS₂ coated surfaces with regard to their tribological fracture behaviour

Holmberg, Kenneth; Ronkainen, H; Laukkanen, A; Wallin, K et al.

Part of Proceedings of the International conference Nordtrib 2008:, 2008

Reproducing wear mechanisms in gear hobbing: evaluation of a single insert milling test

Gerth, Julia; Werner, Mathias; Larsson, Mats; Wiklund, Urban

Part of Proceedings of the International conference Nordtrib 2008, 2008

Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, Mattias et al.

Part of E-MRS spring meeting 2007 (Strasbourg 28 maj - 1 juni), 2007

Tribofilm formation and tribological properties of nanocomposite TiC and TiAlC coatings

Lindquist, M; Wilhelmsson, O; Jansson, U; Wiklund, Urban

2007

Design of sputtered nc-MeC/a-C nanocomposite coatings through doping with a second metallic element

Lewin, Erik; Wilhelmsson, Ola; Jansson, Ulf; Lindquist, M et al.

2007

Wear propagation of PVD AlCrN coated HSS hob in dry gear hobbing

Gerth, Julia; Larsson, Mats; Wiklund, Urban

2007

Development of monolayered low friction PVD ceramic coatings for application on tools and mechanical components

Wiklund, Urban; Stavlid, Nils; Hogmark, Sture

Part of Advances in Science and Technology, p. 2750, 2006

Possibilities for Optimisation of Low friction coatings

Hogmark, Sture; Svahn, Fredrik; Stavlid, Nils; Wiklund, Urban et al.

Part of International Tribology Conference, Kobe., 2005

Effects of substrate bias polarity on tribological a-C:Ta coatings

Nilsson, D; Coronel, E; Wiklund, U

Part of AUSTRIB ´02, Perth, 2002

Nanoindentation on micro pillars for determination of intrincic hardness and residual stress in coatings deposited on complex geometries

André, Benny; Hollman, Patrik; Wiklund, Urban

The role of aluminium additions in the oxidation and wear of a TaC:C low-friction coating

Nilsson, Daniel; Stavlid, Nils; Carlsson, Mattias; Wiklund, Urban et al.

The role of aluminium additions in the oxidation and wear of TaC:C low-friction coating

Nilsson, Daniel; Stavlid, Nils; Lindquist, Mattias; Wiklund, Urban et al.

Rolling contact fatigue of sintered PM steel with added nanopowder

Holmberg, Anders; Wiklund, Urban; Kassman Rudolphi, Åsa

Influence of alignment between extended tool ridges and the wood structure on the defibration mechanisms in groundwood pulping experiments

Heldin, Magnus; Wiklund, Urban

Microstructural Evolution and Sliding Wear Behavior of Additively Manufactured Ti6Al4V–316L Alloy under Various Heat Treatments

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban

Length reduction of a percussive rock drill hammer byintroduction of geometric substructure

Huo, Jinxing; Leviandhika, Vidhiaza; Khalid, Saad; Wiklund, Urban et al.

Rapid solidification and α-Mg/β-Li morphology evolution in laser surface–remelted dual-phase Mg–6 wt.% Li alloy

Leviandhika, Vidhiaza; Kotiadis, Stephanie; Donzel-Gargand, Olivier; Persson, Cecilia et al.

In-Situ Surface Modification of Ti-6Al-4V via Shielding Gas Switching during PBF-LB: Effects on Microstructure and Wear Behavior.

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban

Nitride Formation During Post-Processing for Enhanced Wear Resistance of PBF-LB Ti-6Al-4V via Hot Isostatic Pressing in Nitrogen Atmosphere

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban