Olivier Donzel-Gargand

Nyckelord

• atom probe tomography
• cigs
• electron microscopy
• focused ion beam
• solar cell
• thin film

Publikationer

Urval av publikationer

• On the assessment of CIGS surface passivation by photoluminescence (2015)
• Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications (2014)
• TEM analyses of diffusion barrier on steel substrate (2013)

Senaste publikationer

• N-induced antibacterial capability of ZrO₂-SiO₂ glass ceramics by ion implantation (2025)
• Hierarchical Incorporation of Reduced Graphene Oxide into Anisotropic Cellulose Nanofiber Foams Improves Their Thermal Insulation (2024)
• Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools (2024)
• Substrate orientation influence on nanotwinning in magnetron sputtered CoCrFeMnNi and Ni coatings (2024)
• High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency (2024)

Alla publikationer

Artiklar

• N-induced antibacterial capability of ZrO₂-SiO₂ glass ceramics by ion implantation (2025)
• Hierarchical Incorporation of Reduced Graphene Oxide into Anisotropic Cellulose Nanofiber Foams Improves Their Thermal Insulation (2024)
• Exploring the tribochemical wear and material transfer caused by Cu15Zn alloys on shearing tools (2024)
• Substrate orientation influence on nanotwinning in magnetron sputtered CoCrFeMnNi and Ni coatings (2024)
• High-concentration silver alloying and steep back-contact gallium grading enabling copper indium gallium selenide solar cell with 23.6% efficiency (2024)
• Effect of Ordered Vacancy Compounds on the Carrier Collection in Wide‐Gap (Ag,Cu)(In,Ga)Se₂ Solar Cells (2024)
• Bifacial Wide‐Gap (Ag,Cu)(In,Ga)Se₂ Solar Cell with 13.6% Efficiency Using In₂O₃:W as a Back Contact Material (2024)
• The Crystal Structure of Al₄SiC₄ Revisited (2024)
• Structural and mechanical properties of magnetron sputtered (Nb_xMo_1-x)C thin films (2024)
• Ag-Dependent Behavior Threshold and Metastability in Wide-Gap (Ag,Cu)(In,Ga)Se₂ Solar Cells (2024)
• Enhanced performance of Cu₂ZnSnS₄ based bifacial solar cells with FTO and W/FTO back contacts through absorber air annealing and Na incorporation (2024)
• In Situ Mapping of Phase Evolutions in Rapidly Heated Zr-Based Bulk Metallic Glass with Oxygen Impurities (2024)
• Structural Si₃N₄-SiO₂ glass ceramics with bioactive and anti-bacterial properties (2024)
• Depth-Dependent Atomic-Scale Structural Changes in (Ag,Cu)(In,Ga)Se₂ Absorbers Relevant for Thin-Film Solar Cells (2023)
• Magnetron sputtered high entropy alloy/amorphous carbon nanocomposite coatings (2023)
• Extending the Passive Region of CrFeNi-Based High Entropy Alloys (2023)
• Exploring Crystallization Phenomena in Al₂TiO₅-Based Chemical Vapor-Deposited Coatings by in Situ Transmission Electron Microscopy (2023)
• Synthesis of BaZrS₃ Perovskite Thin Films at a Moderate Temperature on Conductive Substrates (2022)
• Rubidium Fluoride Absorber Treatment for Wide-Gap (Ag,Cu)(In,Ga)Se-2 Solar Cells (2022)
• Wide-Gap Chalcopyrite Solar Cells with Indium Oxide-Based Transparent Back Contacts (2022)
• Microscopic insight into the impact of the KF post-deposition treatment on optoelectronic properties of (Ag,Cu)(In,Ga)Se₂ solar cells (2022)
• Tribofilm formation of a boric acid fuel additive (2022)
• Investigation of AgGaSe₂ as a Wide Gap Solar Cell Absorber (2021)
• Front passivation of Cu(In,Ga)Se-2 solar cells using Al2O3 (2020)
• Amorphous tin-gallium oxide buffer layers in (Ag,Cu)(In,Ga)Se₂ solar cells (2020)
• Thermodynamic stability, phase separation and Ag grading in (Ag,Cu)(In,Ga)Se-2 solar absorbers (2020)
• Decoupling of Optical and Electrical Properties of Rear Contact CIGS Solar Cells (2019)
• Secondary phase formation and surface modification from a high dose KF-post deposition treatment of (Ag,Cu)(In,Ga)Se-2 solar cell absorbers (2019)
• Rear Optical Reflection and Passivation Using a Nanopatterned Metal/Dielectric Structure in Thin-Film Solar Cells (2019)
• Deep surface Cu depletion induced by K in high-efficiency Cu(In,Ga)Se2 solar cell absorbers (2018)
• TiN Interlayers with Varied Thickness in Cu2ZnSnS(e)(4) Thin Film Solar Cells (2018)
• Atomic layer deposition of Zn(O,S) buffer layers for Cu(In,Ga)Se₂ solar cells with KF post-deposition treatment (2018)
• Effect of different Na supply methods on thin Cu(In,Ga)Se₂ solar cells with Al₂O₃ rear passivation layers (2018)
• Atomic Layer Deposition of Cubic and Orthorhombic Phase Tin Monosulfide (2017)
• Characterization of TiN back contact interlayers with varied thickness for Cu2ZnSn(S,Se)4 thin film solar cells (2017)
• Investigation of the SnS/Cu₂ZnSnS₄ interfaces in Kesterite Thin-Film Solar Cells (2017)
• Surface defect passivation by a thin metallic barrier for Cu(In_xGa_1-x)Se₂ co-evaporation on Cr-steel substrates (2016)
• Deposition temperature induced conduction band changes in zinc tin oxide buffer layers for Cu(In,Ga)Se₂ solar cells (2016)
• Rear Surface Optimization of CZTS Solar Cells by Use of a Passivation Layer With Nanosized Point Openings (2016)
• On the assessment of CIGS surface passivation by photoluminescence (2015)
• Rear Surface Optimization of CZTS Solar Cellsby Use of a Passivation Layer WithNanosized Point Openings (2015)
• Emulsion Electrospinning as an Approach to Fabricate PLGA/Chitosan Nanofibers for Biomedical Applications (2014)
• Preparation and characterisation of ZnO/Fe₂O₃ core–shell nanorods
• Surface Modification And Secondary Phase Formation From a High Dose KF-Post Deposition Treatment of (Ag,Cu)(In,Ga)Se2 Solar Cell Absorbers
• The influence of residual ions on calcium phosphate transformation in a solution-based process: a TEM analysis
• Antiviral Properties of Oxidized Silicon Nitride Against SARS-CoV-2
• Elemental distribution in carbon-supersaturated high entropy alloycoatings: A synchrotron-based study
• High entropy alloy/carbon nanocomposites: Influence of carbon on the mechanical properties and corrosion resistance

Böcker

• The Multiple Faces of Interfaces (2018)

Konferenser

• ALD of phase controlled tin monosulfide thin films (2017)
• Cu-depleted patches induced by presence of K during growth of CIGS absorbers (2017)
• Rear surface optimization of CZTS solar cells by use of a passivation layer with nano-sized point openings (2015)
• Functionalization of steel substrate: influence of barrier nature on element diffusion from the substrate (2014)
• CIGS on steel substrate: Diffusion of iron through the barrier layer (2013)
• TEM analyses of diffusion barrier on steel substrate (2013)