Erik Johansson
Professor vid Institutionen för kemi - Ångström; Fysikalisk kemi
- Telefon:
- 018-471 36 63
- E-post:
- erik.johansson@kemi.uu.se
- Besöksadress:
- Ångströmlaboratoriet
Lägerhyddsvägen 1
751 20 UPPSALA - Postadress:
- Box 523
751 20 UPPSALA
Ladda ned kontaktuppgifter för Erik Johansson vid Institutionen för kemi - Ångström; Fysikalisk kemi
- Akademiska meriter:
- Docent
Mer information visas för dig som medarbetare om du loggar in.
Kort presentation
Research projects
- Perovskite solar cells
- Quantum dot solar cells
- Surface and interface molecular and electronic structure analysis of solar cells
- Hybrid organic/inorganic solar cell
- Solar cells for transportation
Biografi
Denna text finns inte på svenska, därför visas den engelska versionen.
My research interests are new solar cell materials. I investigate both functional device properties and more fundamental small scale and short time scale properties and try to link these to obtain a better understanding of the devices. The techniques used for these investigations are X-ray photoelectron spectroscopy (XPS), photoelectrochemical measurements, laser pump probe spectroscopies, IR-spectroscopies and synchrotron based spectroscopies.
Publikationer
Urval av publikationer
- Versatile high-repetition-rate phase-locked chopper system for fast timing experiments in the vacuum ultraviolet and x-ray spectral region (2012)
- Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells (2012)
- Energy Alignment and Surface Dipoles of Rylene Dyes adsorbed to TiO2 nanoparticles (2011)
- Solid state dye-sensitized solar cells prepared by infiltrating a molten hole conductor into a mesoporous film at a temperature below 150 degrees C (2011)
- Energy level alignment in TiO(2)/dipole-molecule/P3HT interfaces (2011)
- Characterization of surface passivation by poly(methylsiloxane) for dye-sensitized solar cells employing the ferrocene redox couple. (2010)
- Surface Molecular Quantification and Photoelectrochemical Characterization of Mixed Organic Dye and Coadsorbent Layers on TiO2 for Dye-Sensitized Solar Cells (2010)
- Bilayer hybrid solar cells based on triphenylamine-thienylenevinylene dye and TiO2 (2010)
- Modification of nanostructured TiO2 electrodes by electrochemical Al3+ insertion (2007)
- Electronic and Molecular Surface Structure of a Polyene-diphenylaniline Dye Adsorbed from Solution onto Nanoporous TiO2 (2007)
- Effects of water in the Surface Adsorption of Dye molecules at Nanostructured TiO2 (2006)
- Electronic and molecular surface structure of Ru(tcterpy)(NCS)3 and Ru(dcbpy)2(NCS)2 adsorbed from solution onto nanostructured TiO2 – A Photoelectron spectroscopy study (2005)
- Interfacial Properties of Photovoltaic TiO2/dye/PEDOT-PSS Heterojunctions (2005)
- PHOTOVOLTAIC AND INTERFACIAL PROPERTIES OF HETEROJUNCTIONS COMPRISING DYE-SENSITIZED DENSE TiO2 AND TRIARYLAMINE DERIVATIVES IN SOLID AND LIQUID STATE. (1996)
Senaste publikationer
- Controlling Electronic-Ionic Kinetics via Size Engineering in CsPbBr3 Perovskite Nanocrystals (2024)
- Effect of different halide-based ligands on the passivation and charge carrier dynamics in AgBiS2 nanocrystal solar cells (2024)
- Can photoluminescence quenching be a predictor for perovskite solar cell efficiencies? (2023)
- Transient Energy-Resolved Photoluminescence Study of Excitons and Free Carriers on FAPbBr3 and FAPbBr3/SnO2 Interfaces (2023)
- Magnetic carbon nanotube modified S-scheme TiO2-x/g-C3N4/CNFe heterojunction coupled with peroxymonosulfate for effective visible-light-driven photodegradation via enhanced interfacial charge separation (2023)
Alla publikationer
Artiklar
- Controlling Electronic-Ionic Kinetics via Size Engineering in CsPbBr3 Perovskite Nanocrystals (2024)
- Effect of different halide-based ligands on the passivation and charge carrier dynamics in AgBiS2 nanocrystal solar cells (2024)
- Can photoluminescence quenching be a predictor for perovskite solar cell efficiencies? (2023)
- Transient Energy-Resolved Photoluminescence Study of Excitons and Free Carriers on FAPbBr3 and FAPbBr3/SnO2 Interfaces (2023)
- Magnetic carbon nanotube modified S-scheme TiO2-x/g-C3N4/CNFe heterojunction coupled with peroxymonosulfate for effective visible-light-driven photodegradation via enhanced interfacial charge separation (2023)
- Solvent Engineering of Perovskite Crystallization for High Band Gap FAPbBr(3) Perovskite Solar Cells Prepared in Ambient Condition (2023)
- A carbazole-based self-assembled monolayer as the hole transport layer for efficient and stable Cs(0.25)FA(0.75)Sn(0.5)Pb(0.5)I(3) solar cells (2023)
- Monolithic FAPbBr3 photoanode for photoelectrochemical water oxidation with low onset-potential and enhanced stability (2023)
- Enhancing the efficiency and stability of perovskite solar cells based on moisture-resistant dopant free hole transport materials by using a 2D-BA2PbI4 interfacial layer (2022)
- Combining Quantum Dot and Perovskite Photovoltaic Cells for Efficient Photon to Electricity Conversion in Energy Storage Devices (2022)
- Efficient and bending durable flexible perovskite solar cells via interface modification using a combination of thin MoS2 nanosheets and molecules binding to the perovskite (2022)
- The Complex Degradation Mechanism of Copper Electrodes on Lead Halide Perovskites (2022)
- Methylammonium Bromide Assisted Crystallization for Enhanced Lead-Free Double Perovskite Photovoltaic Performance (2022)
- Perovskite and quantum dot tandem solar cells with interlayer modification for improved optical semitransparency and stability (2021)
- Nanotechnology for catalysis and solar energy conversion (2021)
- Emerging perovskite quantum dot solar cells (2021)
- Regulating Thiol Ligands of p-Type Colloidal Quantum Dots for Efficient Infrared Solar Cells (2021)
- Solar-Driven Water Splitting at 13.8% Solar-to-Hydrogen Efficiency by an Earth-Abundant Electrolyzer (2021)
- SnOx Atomic Layer Deposition on Bare Perovskite (2021)
- Efficiency and Stability Enhancement of Perovskite Solar Cells Utilizing a Thiol Ligand and MoS2 (100) Nanosheet Surface Modification (2021)
- Efficient and Stable FAPbBr(3) Perovskite Solar Cells via Interface Modification by a Low-Dimensional Perovskite Layer (2021)
- Mixed-Halide Double Perovskite Cs2AgBiX6 (X=Br, I) with Tunable Optical Properties via Anion Exchange (2021)
- Enhanced performance of CH3NH3PbI3 perovskite solar cells via interface modification using phenyl ammonium iodide derivatives (2020)
- 2-Terminal CIGS-perovskite tandem cells (2020)
- Dual Passivation of CsPbI3 Perovskite Nanocrystals with Amino Acid Ligands for Efficient Quantum Dot Solar Cells (2020)
- Large-Grained All-Inorganic Bismuth-Based Perovskites with Narrow Band Gap via Lewis Acid-Base Adduct Approach (2020)
- Highly crystalline MAPbI3 perovskite grain formation by irreversible poor-solvent diffusion aggregation, for efficient solar cell fabrication (2020)
- Flexible Lead Bromide Perovskite Solar Cells (2020)
- A method for studying pico to microsecond time-resolved core-level spectroscopy used to investigate electron dynamics in quantum dots (2020)
- Degradation Mechanism of Silver Metal Deposited on Lead Halide Perovskites (2020)
- Four-Terminal Tandem Solar Cell with Dye-Sensitized and PbS Colloidal Quantum-Dot-Based Subcells (2020)
- PbS Colloidal Quantum Dot Inks for Infrared Solar Cells (2020)
- Tuning the Bandgap in Silver Bismuth Iodide Materials by Partly Substituting Bismuth with Antimony for Improved Solar Cell Performance (2020)
- Cubic AgBiS2 Colloidal Nanocrystals for Solar Cells (2020)
- D35-TiO2 nano-crystalline film as a high performance visible-light photocatalyst towards the degradation of bis-phenol A (2019)
- Highly Stabilized Quantum Dot Ink for Efficient Infrared Light Absorbing Solar Cells (2019)
- Cesium Bismuth Iodide Solar Cells from Systematic Molar Ratio Variation of CsI and BiI3 (2019)
- Metal nanowire networks (2019)
- In situ growth of perovskite stacking layers for high-efficiency carbon-based hole conductor free perovskite solar cells (2019)
- Bandgap Tuning of Silver Bismuth Iodide via Controllable Bromide Substitution for Improved Photovoltaic Performance (2019)
- Probing and Controlling Surface Passivation of PbS Quantum Dot Solid for Improved Performance of Infrared Absorbing Solar Cells (2019)
- Excellent growth of ZnS shell on Ag2S QDs using a photochemical-microwave irradiation approach and fabrication of their indoor QD thin film solar cells (2018)
- The electronic structure and band interface of cesium bismuth iodide on a titania heterostructure using hard X-ray spectroscopy (2018)
- The synergistic effect of dimethyl sulfoxide vapor treatment and C-60 electron transporting layer towards enhancing current collection in mixed-ion inverted perovskite solar cells (2018)
- Preparation of mixed-ion and inorganic perovskite films using water and isopropanol as solvents for solar cell applications (2018)
- Photocatalytic activity and mechanism of bisphenol a removal over TiO2-x/rGO nanocomposite driven by visible light (2018)
- Experimental and Theoretical Investigation of the Function of 4-tert-Butyl Pyridine for Interface Energy Level Adjustment in Efficient Solid-State Dye-Sensitized Solar Cells (2018)
- The Importance of Pendant Groups on Triphenylamine-Based Hole Transport Materials for Obtaining Perovskite Solar Cells with over 20% Efficiency (2018)
- Highly photostable and efficient semitransparent quantum dot solar cells by using solution-phase ligand exchange (2018)
- Inorganic CsPbI3 Perovskite Coating on PbS Quantum Dot for Highly Efficient and Stable Infrared Light Converting Solar Cells (2018)
- Extremely lightweight and ultra-flexible infrared light-converting quantum dot solar cells with high power-per-weight output using a solution-processed bending durable silver nanowire-based electrode (2018)
- The Effect of Dopant-Free Hole-Transport Polymers on Charge Generation and Recombination in Cesium-Bismuth-Iodide Solar Cells (2018)
- Hot-Injection Synthesized Ag2S Quantum Dots with Broad Light Absorption and High Stability for Solar Cell Applications (2018)
- High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact (2017)
- Atomic Layer Deposition of Electron Selective SnOx and ZnO Films on Mixed Halide Perovskite (2017)
- Analysis of crystalline phases and integration modelling of charge quenching yields in hybrid lead halide perovskite solar cell materials (2017)
- Characterization techniques for dye-sensitized solar cells (2017)
- Photon Energy-Dependent Hysteresis Effects in Lead Halide Perovskite Materials (2017)
- Photoinduced Stark Effects and Mechanism of Ion Displacement in Perovskite Solar Cell Materials (2017)
- Tailor-Making Low-Cost Spiro[fluorene-9,9′-xanthene]-Based 3D Oligomers for Perovskite Solar Cells (2017)
- Al2O3 Underlayer Prepared by Atomic Layer Deposition for Efficient Perovskite Solar Cells. (2017)
- Incorporation of Counter Ions in Organic Molecules (2017)
- Dry-Deposited Transparent Carbon Nanotube Film as Front Electrode in Colloidal Quantum Dot Solar Cells (2017)
- Highly efficient, transparent and stable semitransparent colloidal quantum dot solar cells (2017)
- FTO-free top-illuminated colloidal quantum dot electro-optics in devices (2017)
- Reduction of charge recombination in PbS colloidal quantum dot solar cells at the quantum dot/ZnO interface by inserting a MgZnO buffer layer (2017)
- Highly Efficient Flexible Quantum Dot Solar Cells with Improved Electron Extraction Using MgZnO Nanocrystals (2017)
- Enhanced charge carrier extraction by a highly ordered wrinkled MgZnO thin film for colloidal quantum dot solar cells (2017)
- High Photon-to-Current Conversion in Solar Cells Based on Light-Absorbing Silver Bismuth Iodide (2017)
- Solution-Processed Environmentally Friendly Ag2S Colloidal Quantum Dot Solar Cells with Broad Spectral Absorption (2017)
- Carbon nanotube-based hybrid hole-transporting material and selective contact for high efficiency perovskite solar cells (2016)
- Electronic structure dynamics in a low bandgap polymer studied by time-resolved photoelectron spectroscopy (2016)
- Geometrical and energetical structural changes in organic dyes for dye-sensitized solar cells probed with photoelectron spectroscopy and DFT (2016)
- Facile Synthesis of Fluorene-based Hole Transport Materials for Highly Efficient Perovskite Solar Cells and Solid-State Dye-sensitized Solar Cells (2016)
- Vapor phase conversion of PbI2 to CH3NH3PbI3 (2016)
- From Quantum Dots to Micro Crystals (2016)
- Extended Photo-Conversion Spectrum in Low-Toxic Bismuth Halide Perovskite Solar Cells (2016)
- Molecular degradation of D35 and K77 sensitizers when exposed to temperatures exceeding 100 °C investigated by photoelectron spectroscopy (2016)
- Coadsorption of Dye Molecules at TiO2 Surfaces (2016)
- Bismuth Iodide Perovskite Materials for Solar Cell Applications (2016)
- Ambient air-processed mixed-ion perovskites for high-efficiency solar cells (2016)
- The Role of 3D Molecular Structural Control in New Hole Transport Materials Outperforming Spiro-OMeTAD in Perovskite Solar Cells (2016)
- The effect of mesoporous TiO2 pore size on the performance of solid-state dye sensitized solar cells based on photoelectrochemically polymerized Poly(3,4-ethylenedioxythiophene) hole conductor (2016)
- Efficient Blue-Colored Solid-State Dye-Sensitized Solar Cells (2016)
- Efficient solid-state dye sensitized solar cells (2016)
- Constructive Effects of Alkyl Chains (2016)
- Strategy to Boost the Efficiency of Mixed-Ion Perovskite Solar Cells (2016)
- Semitransparent quantum dot solar cell (2016)
- Electro-Optics of Colloidal Quantum Dot Solids for Thin-FilmSolar Cells (2016)
- Fine Tuned Nanolayered Metal/Metal Oxide Electrode for Semitransparent Colloidal Quantum Dot Solar Cells (2016)
- Utilizing light trapping interference effects in microcavity structured colloidal quantum dot solar cells (2016)
- Peripheral Hole Acceptor Moieties on an Organic Dye Improve Dye-Sensitized Solar Cell Performance (2015)
- Electronic Structure of CH3NH3PbX3 Perovskites (2015)
- Bismuth Based Hybrid Perovskites A(3)Bi(2)I(9) (A: Methylammonium or Cesium) for Solar Cell Application (2015)
- Chemical and Electronic Structure Characterization of Lead Halide Perovskites and Stability Behavior under Different Exposures-A Photoelectron Spectroscopy Investigation (2015)
- Probing Photocurrent Generation, Charge Transport, and Recombination Mechanisms in Mesostructured Hybrid Perovskite through Photoconductivity Measurements (2015)
- Matrix-Assisted Laser Desorption/Ionization Mass Spectrometric Analysis of Poly(3,4-ethylenedioxythiophene) in Solid-State Dye-Sensitized Solar Cells (2015)
- Slow recombination in quantum dot solid solar cellusing p–i–n architecture with organic p-type holetransport material (2015)
- Efficient charge-carrier extraction from Ag2Squantum dots prepared by the SILAR method for utilization of multiple exciton generation (2015)
- ZnO@Ag2S core-shell nanowire arrays for environmentally friendly solid-state quantum dot-sensitized solar cells with panchromatic light capture and enhanced electron collection (2015)
- Solution processed flexible and bending durable heterojunction colloidal quantum dot solar cell (2015)
- Atomic and Electronic Structures of Interfaces in Dye-Sensitized, Nanostructured Solar Cells (2014)
- Infiltration of Spiro-MeOTAD hole transporting material into nanotubular TiO2 electrode for solid-state dye-sensitized solar cells (2014)
- Electronic Properties of Meso-Superstructured and Planar Organometal Halide Perovskite Films (2014)
- Electronic Structure of TiO2/CH3NH3PbI3 Perovskite Solar Cell Interfaces (2014)
- Energy level alignment in TiO2/metal sulfide/polymer interfaces for solar cell applications (2014)
- Understanding Interfacial Charge Transfer between Metallic PEDOT Counter Electrodes and a Cobalt Redox Shuttle in Dye-Sensitized Solar Cells (2014)
- Enhanced Crystallinity in Organic-Inorganic Lead Halide Perovskites on Mesoporous TiO2 via Disorder-Order Phase Transition (2014)
- Mesoporous TiO2 microbead electrodes for solid state dye-sensitized solar cells (2014)
- Enhancement of p-Type Dye-Sensitized Solar Cell Performance by Supramolecular Assembly of Electron Donor and Acceptor (2014)
- Solid-State Perovskite-Sensitized p-Type Mesoporous Nickel Oxide Solar Cells (2014)
- Poly(3,4-ethylenedioxythiophene) Hole-Transporting Material Generated by Photoelectrochemical Polymerization in Aqueous and Organic Medium for All-Solid-State Dye-Sensitized Solar Cells (2014)
- Efficient and stable CH3NH3PbI3-sensitized ZnO nanorod array solid-state solar cells (2013)
- Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures (2013)
- Effect of Different Hole Transport Materials on Recombination in CH3NH3PbI3 Perovskite-Sensitized Mesoscopic Solar Cells (2013)
- Cobalt(II/III) Redox Electrolyte in ZnO Nanowire-Based Dye-Sensitized Solar Cells (2013)
- Influence of the Annealing Atmosphere on the Performance of ZnO Nanowire Dye-Sensitized Solar Cells (2013)
- Neutral, Polaron, and Bipolaron States in PEDOT Prepared by Photoelectrochernical Polymerization and the Effect on Charge Generation Mechanism in the Solid-State Dye-Sensitized Solar Cell (2013)
- Integration of solid-state dye-sensitized solar cell with metal oxide charge storage material into photoelectrochemical capacitor (2013)
- Efficient solid state dye-sensitized solar cells based on an oligomer hole transport material and an organic dye (2013)
- Initial Light Soaking Treatment Enables Hole Transport Material to Outperform Spiro-OMeTAD in Solid-State Dye-Sensitized Solar Cells (2013)
- New Approach for Preparation of Efficient Solid-State Dye-Sensitized Solar Cells by Photoelectrochemical Polymerization in Aqueous Micellar Solution (2013)
- Combining a Small Hole-Conductor Molecule for Efficient Dye Regeneration and a Hole-Conducting Polymer in a Solid-State Dye-Sensitized Solar Cell (2012)
- Defect minimization and morphology optimization in TiO2 nanotube thin films, grown on transparent conducting substrate, for dye synthesized solar cell application (2012)
- Versatile high-repetition-rate phase-locked chopper system for fast timing experiments in the vacuum ultraviolet and x-ray spectral region (2012)
- Energy Level Shifts in Spiro-OMeTAD Molecular Thin Films When Adding Li-TFSI (2012)
- Energy Level Shifts in Spiro-OMeTAD Molecular Thin Films When Adding Li-TFSI (2012)
- Excitation Energy Dependent Charge Separation at Hole-Transporting Dye/TiO2 Hetero Interface (2012)
- Effect of the Preparation Procedure on the Morphology of Thin TiO2 Films and Their Device Performance in Small-Molecule Bilayer Hybrid Solar Cells (2012)
- Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells (2012)
- Characterization of the Interface Properties and Processes in Solid State Dye-Sensitized Solar Cells Employing a Perylene Sensitizer (2011)
- Energy Alignment and Surface Dipoles of Rylene Dyes adsorbed to TiO2 nanoparticles (2011)
- Solid state dye-sensitized solar cells prepared by infiltrating a molten hole conductor into a mesoporous film at a temperature below 150 degrees C (2011)
- Influence of Water on the Electronic (2011)
- Mapping the frontier electronic structures of triphenylamine basedorganic dyes at TiO2 interfaces (2011)
- Mapping the frontier electronic structures of triphenylamine based organic dyes at TiO2 interfaces (2011)
- Highly Efficient Solid-State Dye-Sensitized Solar Cells Based on Triphenylamine Dyes (2011)
- Efficient infiltration of low molecular weight polymer in nanoporous TiO2 (2011)
- Energy level alignment in TiO(2)/dipole-molecule/P3HT interfaces (2011)
- Preventing Dye Aggregation on ZnO by Adding Water in the Dye-Sensitization Process (2011)
- Characterization of surface passivation by poly(methylsiloxane) for dye-sensitized solar cells employing the ferrocene redox couple. (2010)
- Electronic and molecular structures of organic dye/TiO2 interfaces for solar cell applications (2010)
- Surface Molecular Quantification and Photoelectrochemical Characterization of Mixed Organic Dye and Coadsorbent Layers on TiO2 for Dye-Sensitized Solar Cells (2010)
- Bilayer hybrid solar cells based on triphenylamine-thienylenevinylene dye and TiO2 (2010)
- Photocurrent Spectra and Fast Kinetic Studies of P3HT/PCBM Mixed with a Dye for Photoconversion in the Near-IR Region (2009)
- Rhodanine dyes for dye-sensitized solar cells (2009)
- Modification of nanostructured TiO2 electrodes by electrochemical Al3+ insertion (2007)
- Frontier electronic structures of Ru(tcterpy)(NCS)3 and Ru(dcbpy)2(NCS)2 (2007)
- Photovoltaic and Interfacial Properties of Heterojunctions Containing Dye-sensitized Dense TiO2 and Triarylamine derivatives (2007)
- Electronic and Molecular Surface Structure of a Polyene-diphenylaniline Dye Adsorbed from Solution onto Nanoporous TiO2 (2007)
- Electronic and molecular surface structure of Ru(tcterpy)(NCS)3 and Ru(dcbpy)2(NCS)2 adsorbed from solution onto nanostructured TiO2 – A Photoelectron spectroscopy study (2005)
- Interfacial Properties of Photovoltaic TiO2/dye/PEDOT-PSS Heterojunctions (2005)
- Comparing Charge Generation, Transport and Recombination in PbS Quantum Dot Solar Cells Prepared from Two Sizes of Quantum Dots
- Cesium bismuth iodide, CsxBiyIz, solar cell compounds from systematic molar ratio variation
- The Effects of Dopant-Free Hole Transport Materials on n–i–p FAPbBr3 Perovskite Solar Cells under Ambient Processed
- Solvent Engineering of Perovskite Crystallization for High Performance FAPbBr3 Perovskite Solar Cells Prepared in Ambient Condition
- Interface Structure Effects upon Co-Adsorption of Black Dye and D35 on TiO2
- The complex degradation mechanism of copper electrodes on lead halide perovskite
- Monolithic FAPbBr3 Photoanode for Photoelectrochemical Water Oxidation with Ultralow-Onset-Potential
- Tuning Size and Composition in Cubic AgBiS2 CQDs for Solar Cells
Konferenser
- Nano Crystals to Micro Crystals (2016)
- Effects of water in the Surface Adsorption of Dye molecules at Nanostructured TiO2 (2006)
- PHOTOVOLTAIC AND INTERFACIAL PROPERTIES OF HETEROJUNCTIONS COMPRISING DYE-SENSITIZED DENSE TiO2 AND TRIARYLAMINE DERIVATIVES IN SOLID AND LIQUID STATE. (1996)
Rapporter
