Cecilia Persson

Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants

Grzeszczak, Ana; Shtender, Vitalii; Åberg, Jonas; Persson, Cecilia

Ingår i Materials & design, 2026

• DOI för Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants
• Ladda ner fulltext (pdf) av Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants

Glial cell responses to particles derived from spinal implant materials

Echeverri, Estefanía; Ferraz, Natalia; Hulsart-Billström, Gry; O'Callaghan, Paul et al.

Ingår i Materials Today Advances, 2026

• DOI för Glial cell responses to particles derived from spinal implant materials
• Ladda ner fulltext (pdf) av Glial cell responses to particles derived from spinal implant materials

Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement

Leliopoulos, Christos; Mokhtari, Hamidreza; Tavakoli, Shima; Shtender, Vitalii et al.

Ingår i Chemistry of Materials, s. 442-453, 2026

• DOI för Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement
• Ladda ner fulltext (pdf) av Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement

A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts

Ghandour, Salim; Bryant, Michael; M. Hall, Richard; Åberg, Jonas et al.

Ingår i Applied Materials Today, 2026

• DOI för A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts
• Ladda ner fulltext (pdf) av A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts

Understanding crystal nucleation and growth in the Mg-Zn-Ca system for additive manufacturing of resorbable implants

Alonso Rancurel, Belén; Persson, Cecilia; Martin, Fisk; D'Elia, Francesco et al.

2025

Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants

Grzeszczak, Ana; Shtender, Vitalii; Åberg, Jonas; Persson, Cecilia

Ingår i Materials & design, 2026

• DOI för Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants
• Ladda ner fulltext (pdf) av Poly(L-lactic acid) and calcium phosphate composite structures: Towards fully resorbable, patient-specific cranial implants

Glial cell responses to particles derived from spinal implant materials

Echeverri, Estefanía; Ferraz, Natalia; Hulsart-Billström, Gry; O'Callaghan, Paul et al.

Ingår i Materials Today Advances, 2026

• DOI för Glial cell responses to particles derived from spinal implant materials
• Ladda ner fulltext (pdf) av Glial cell responses to particles derived from spinal implant materials

Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement

Leliopoulos, Christos; Mokhtari, Hamidreza; Tavakoli, Shima; Shtender, Vitalii et al.

Ingår i Chemistry of Materials, s. 442-453, 2026

• DOI för Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement
• Ladda ner fulltext (pdf) av Quantitative Assessment of Chemical Modifications of Macromolecules through Counterion Measurement

A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts

Ghandour, Salim; Bryant, Michael; M. Hall, Richard; Åberg, Jonas et al.

Ingår i Applied Materials Today, 2026

• DOI för A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts
• Ladda ner fulltext (pdf) av A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts

Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Leviandhika, Vidhiaza; D'Elia, Francesco; Shtender, Vitalii; Mellin, P. et al.

Ingår i Journal of Materials Research and Technology, s. 2352-2363, 2025

• DOI för Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam
• Ladda ner fulltext (pdf) av Engineering graded microstructures in a Ti alloy through high-cycle laser rescanning in powder bed fusion-Laser beam

Powder reuse in powder bed fusion-laser beam of WE43 magnesium alloy: towards sustainable manufacturing of biodegradable implants

Cavaliere, Giulio Pietro; Shtender, Vitalii; Mellin, Pelle; Persson, Cecilia et al.

Ingår i Journal of Materials Research and Technology, s. 5498-5510, 2025

• DOI för Powder reuse in powder bed fusion-laser beam of WE43 magnesium alloy: towards sustainable manufacturing of biodegradable implants
• Ladda ner fulltext (pdf) av Powder reuse in powder bed fusion-laser beam of WE43 magnesium alloy: towards sustainable manufacturing of biodegradable implants

Linoleic acid addition prevents Staphylococcus aureus biofilm formation on PMMA bone cement

Hong, Linglu; Hjort, Karin; Andersson, Dan; Persson, Cecilia

Ingår i Biofilm, 2025

• DOI för Linoleic acid addition prevents Staphylococcus aureus biofilm formation on PMMA bone cement
• Ladda ner fulltext (pdf) av Linoleic acid addition prevents Staphylococcus aureus biofilm formation on PMMA bone cement

Tuning the mechanical properties and printability of viscoelastic skin-derived hydrogels for 3D cell culture

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

Ingår i Biomaterials Science, s. 5755-5768, 2025

• DOI för Tuning the mechanical properties and printability of viscoelastic skin-derived hydrogels for 3D cell culture
• Ladda ner fulltext (pdf) av Tuning the mechanical properties and printability of viscoelastic skin-derived hydrogels for 3D cell culture

Additively manufactured WE43 for biodegradable urinary devices: Exploring the corrosion profile under in vitro urinary tract conditions

Pacheco, Margarida; D'Elia, Francesco; Nilsson Åhman, Hanna; Lima, Estêvão et al.

Ingår i Applied Materials Today, 2025

• DOI för Additively manufactured WE43 for biodegradable urinary devices: Exploring the corrosion profile under in vitro urinary tract conditions
• Ladda ner fulltext (pdf) av Additively manufactured WE43 for biodegradable urinary devices: Exploring the corrosion profile under in vitro urinary tract conditions

Leveraging laser powder bed fusion to alter texture and mechanical properties of magnesium alloy WE43

Larsson, Lisa; D'Elia, Francesco; Sahlberg, Martin; Persson, Cecilia

Ingår i Materials & design, 2025

• DOI för Leveraging laser powder bed fusion to alter texture and mechanical properties of magnesium alloy WE43
• Ladda ner fulltext (pdf) av Leveraging laser powder bed fusion to alter texture and mechanical properties of magnesium alloy WE43

Influence of printing configuration on the resulting topology and antibacterial effectiveness of PVDF-graphene composites

Spanou, Antrea; Hjort, Karin; Welch, Ken; Andersson, Dan I. et al.

Ingår i Polymer testing, 2025

• DOI för Influence of printing configuration on the resulting topology and antibacterial effectiveness of PVDF-graphene composites
• Ladda ner fulltext (pdf) av Influence of printing configuration on the resulting topology and antibacterial effectiveness of PVDF-graphene composites

Bioresorbable, amorphous magnesium-fiber reinforced bone cement with enhanced mechanical and biological properties

Rich, Andrea M.; Berger, Leopold; Deller, Robin; de Berardinis, Niccoló et al.

Ingår i Biomaterials Advances, 2025

• DOI för Bioresorbable, amorphous magnesium-fiber reinforced bone cement with enhanced mechanical and biological properties
• Ladda ner fulltext (pdf) av Bioresorbable, amorphous magnesium-fiber reinforced bone cement with enhanced mechanical and biological properties

Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach

D'Elia, Francesco; Hoseini-Athar, Mohammad; Vaddamanu, Satya Chaitanya; Ersson, Mikael et al.

Ingår i Materials & design, 2025

• DOI för Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach
• Ladda ner fulltext (pdf) av Influence of melting mode on melt pool dynamics and microstructure in WE43 Mg alloy: A combined computational and experimental approach

Dynamics of non-Newtonian agarose gel droplet formation in two-phase microfluidic systems

Agnihotri, Sagar Narhari; Das, Pradipta Kr.; Tolboom, Femke; Werr, Gabriel et al.

Ingår i Physics of fluids, 2025

• DOI för Dynamics of non-Newtonian agarose gel droplet formation in two-phase microfluidic systems
• Ladda ner fulltext (pdf) av Dynamics of non-Newtonian agarose gel droplet formation in two-phase microfluidic systems

Towards improved functionality of mandibular reconstruction plates enabled by additively manufactured triply periodic minimal surface structures

Alomar, Zaki; Aramesh, Morteza; Thor, Andreas; Persson, Cecilia et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2025

• DOI för Towards improved functionality of mandibular reconstruction plates enabled by additively manufactured triply periodic minimal surface structures
• Ladda ner fulltext (pdf) av Towards improved functionality of mandibular reconstruction plates enabled by additively manufactured triply periodic minimal surface structures

The addition of silicon nitride to PMMA bone cements reduces bacterial attachment while supporting pre-osteoblast viability

Katsaros, Ioannis; Echeverri, Estefania; Engqvist, Håkan; Persson, Cecilia et al.

Ingår i Next Materials, 2024

• DOI för The addition of silicon nitride to PMMA bone cements reduces bacterial attachment while supporting pre-osteoblast viability
• Ladda ner fulltext (pdf) av The addition of silicon nitride to PMMA bone cements reduces bacterial attachment while supporting pre-osteoblast viability

Advanced materials provide solutions towards a sustainable world

Hultman, Lars; Mazur, Sara; Ankarcrona, Caroline; Palmqvist, Anders et al.

Ingår i Nature Materials, s. 160-161, 2024

• DOI för Advanced materials provide solutions towards a sustainable world

Higher Laser power improves strength but reduces corrosion resistance of Mg WE43 processed by powder bed fusion

Nilsson Åhman, Hanna; Larsson, Lisa; Wahman, Clarence; Mellin, Pelle et al.

Ingår i Materials Today Communications, 2024

• DOI för Higher Laser power improves strength but reduces corrosion resistance of Mg WE43 processed by powder bed fusion
• Ladda ner fulltext (pdf) av Higher Laser power improves strength but reduces corrosion resistance of Mg WE43 processed by powder bed fusion

Optimization of Primary Screw Stability Using Neural Network-Based Models

Zhou, Yijun; Helgason, Benedikt; Ferguson, Stephen; Persson, Cecilia

Ingår i Computer Methods and Programs in Biomedicine, 2024

• DOI för Optimization of Primary Screw Stability Using Neural Network-Based Models
• Ladda ner fulltext (pdf) av Optimization of Primary Screw Stability Using Neural Network-Based Models

Direct ink writing of biomimetic hydroxyapatite scaffolds with tailored concave porosity

del-Mazo-Barbara, Laura; Diez-Escudero, Anna; Lodoso-Torrecilla, Irene; Aramesh, Morteza et al.

Ingår i International Journal of Bioprinting, 2024

• DOI för Direct ink writing of biomimetic hydroxyapatite scaffolds with tailored concave porosity
• Ladda ner fulltext (pdf) av Direct ink writing of biomimetic hydroxyapatite scaffolds with tailored concave porosity

The effect of degree of sintering on the structural and mechanical properties of Si3N4-SiO2 glass ceramics

Zhou, Huasi; Persson, Cecilia; Engqvist, Håkan; Xia, Wei

Ingår i Ceramics International, s. 30690-30698, 2024

• DOI för The effect of degree of sintering on the structural and mechanical properties of Si3N4-SiO2 glass ceramics
• Ladda ner fulltext (pdf) av The effect of degree of sintering on the structural and mechanical properties of Si3N4-SiO2 glass ceramics

Structural Si₃N₄-SiO₂ glass ceramics with bioactive and anti-bacterial properties

Zhou, Huasi; Persson, Cecilia; Donzel-Gargand, Olivier; Engqvist, Håkan et al.

Ingår i Journal of the European Ceramic Society, s. 4260-4271, 2024

• DOI för Structural Si₃N₄-SiO₂ glass ceramics with bioactive and anti-bacterial properties
• Ladda ner fulltext (pdf) av Structural Si₃N₄-SiO₂ glass ceramics with bioactive and anti-bacterial properties

A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images

Zhou, Yijun; Klintström, Eva; Klintström, Benjamin; Ferguson, Stephen et al.

Ingår i Computer Methods and Programs in Biomedicine, 2024

• DOI för A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images
• Ladda ner fulltext (pdf) av A convolutional neural network-based method for the generation of super-resolution 3D models from clinical CT images

Fabrication and characterization of sodium alginate-silicon nitride-PVA composite biomaterials with damping properties

Du, Xiaoyu; Zhou, Yijun; Schumperlin, Delia; Laganenka, Leanid et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2024

• DOI för Fabrication and characterization of sodium alginate-silicon nitride-PVA composite biomaterials with damping properties
• Ladda ner fulltext (pdf) av Fabrication and characterization of sodium alginate-silicon nitride-PVA composite biomaterials with damping properties

Enhanced Cellular Uptake through Nanotopography-Induced Macropinocytosis

Aramesh, Morteza; Yu, Di; Essand, Magnus; Persson, Cecilia

Ingår i Advanced Functional Materials, 2024

• DOI för Enhanced Cellular Uptake through Nanotopography-Induced Macropinocytosis
• Ladda ner fulltext (pdf) av Enhanced Cellular Uptake through Nanotopography-Induced Macropinocytosis

Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty

Ghandour, Salim; Hong, Linglu; Aramesh, Morteza; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2024

• DOI för Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty
• Ladda ner fulltext (pdf) av Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty

Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels

Zhou, Yijun; Höglund, Lisa; Samanta, Ayan; Procter, Philip et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2024

• DOI för Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels
• Ladda ner fulltext (pdf) av Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels

An improved trabecular bone model based on Voronoi tessellation

Zhou, Yijun; Isaksson, Per; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2023

• DOI för An improved trabecular bone model based on Voronoi tessellation
• Ladda ner fulltext (pdf) av An improved trabecular bone model based on Voronoi tessellation

SiNx Coating Deposition on CoCr by Plasma-Enhanced Chemical Vapor Deposition

Zhou, Huasi; Persson, Cecilia; Xia, Wei; Engqvist, Håkan

Ingår i Biomedical Materials & Devices, s. 376-383, 2023

• DOI för SiNx Coating Deposition on CoCr by Plasma-Enhanced Chemical Vapor Deposition
• Ladda ner fulltext (pdf) av SiNx Coating Deposition on CoCr by Plasma-Enhanced Chemical Vapor Deposition

Nanostructured Ag-Bioglass Implant Coatings with Antibacterial and Osteogenic Activity

Geissel, Felix J.; Platania, Varvara; De Berardinis, Niccoló; Skjöldebrand, Charlotte et al.

Ingår i Advanced Materials Interfaces, 2023

• DOI för Nanostructured Ag-Bioglass Implant Coatings with Antibacterial and Osteogenic Activity
• Ladda ner fulltext (pdf) av Nanostructured Ag-Bioglass Implant Coatings with Antibacterial and Osteogenic Activity

Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels

Echeverri Correa, Estefania; Skjöldebrand, Charlotte; O'Callaghan, Paul; Palmquist, Anders et al.

Ingår i Biomaterials Science, s. 3144-3158, 2023

• DOI för Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels
• Ladda ner fulltext (pdf) av Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels

Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications

Ghandour, Salim; Christie, Iain; Öhman, Caroline; Persson, Cecilia

Ingår i Open Research Europe, 2023

• DOI för Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications
• Ladda ner fulltext (pdf) av Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications

The porous cantilever beam as a model for spinal implants: Experimental, analytical and finite element analysis of dynamic properties

Du, Xiaoyu; Zhou, Yijun; Li, Lingzhe; Persson, Cecilia et al.

Ingår i Mathematical Biosciences and Engineering, s. 6273-6293, 2023

• DOI för The porous cantilever beam as a model for spinal implants: Experimental, analytical and finite element analysis of dynamic properties
• Ladda ner fulltext (pdf) av The porous cantilever beam as a model for spinal implants: Experimental, analytical and finite element analysis of dynamic properties

Fully 3D-printed PVDF-TrFE based piezoelectric devices with PVDF-TrFE-rGO composites as electrodes

Spanou, Andrea; Persson, Cecilia; Johansson, Stefan

Ingår i Micro and Nano Engineering, 2023

• DOI för Fully 3D-printed PVDF-TrFE based piezoelectric devices with PVDF-TrFE-rGO composites as electrodes
• Ladda ner fulltext (pdf) av Fully 3D-printed PVDF-TrFE based piezoelectric devices with PVDF-TrFE-rGO composites as electrodes

Effects of N/Si ratio on mechanical properties of amorphous silicon nitride coating

Zhou, Huasi; Persson, Cecilia; Xia, Wei; Engqvist, Håkan

Ingår i Materials Research Express, 2023

• DOI för Effects of N/Si ratio on mechanical properties of amorphous silicon nitride coating
• Ladda ner fulltext (pdf) av Effects of N/Si ratio on mechanical properties of amorphous silicon nitride coating

The Effect of PCL Addition on 3D-Printable PLA/HA Composite Filaments for the Treatment of Bone Defects

Åkerlund, Elin; Diez-Escudero, Anna; Grzeszczak, Ana; Persson, Cecilia

Ingår i Polymers, 2022

• DOI för The Effect of PCL Addition on 3D-Printable PLA/HA Composite Filaments for the Treatment of Bone Defects
• Ladda ner fulltext (pdf) av The Effect of PCL Addition on 3D-Printable PLA/HA Composite Filaments for the Treatment of Bone Defects

Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium

Skjöldebrand, Charlotte; Echeverri Correa, Estefania; Hulsart Billström, Gry; Persson, Cecilia

Ingår i Biomaterials Science, s. 3757-3769, 2022

• DOI för Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium
• Ladda ner fulltext (pdf) av Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium

Microstructural Origins of the Corrosion Resistance of a Mg-Y-Nd-Zr Alloy Processed by Powder Bed Fusion - Laser Beam

Nilsson Åhman, Hanna; D'Elia, Francesco; Mellin, Pelle; Persson, Cecilia

Ingår i Frontiers in Bioengineering and Biotechnology, 2022

• DOI för Microstructural Origins of the Corrosion Resistance of a Mg-Y-Nd-Zr Alloy Processed by Powder Bed Fusion - Laser Beam
• Ladda ner fulltext (pdf) av Microstructural Origins of the Corrosion Resistance of a Mg-Y-Nd-Zr Alloy Processed by Powder Bed Fusion - Laser Beam

Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs

Widhe, Mona; Diez-Escudero, Anna; Liu, Yuling; Ringström, Nathalie et al.

Ingår i Ceramics International, s. 31449-31460, 2022

• DOI för Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs
• Ladda ner fulltext (pdf) av Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs

Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties

Katsaros, Ioannis; Zhou, Yijun; Welch, Ken; Xia, Wei et al.

Ingår i Journal of Functional Biomaterials, 2022

• DOI för Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties
• Ladda ner fulltext (pdf) av Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties

Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty

Lewin, Susanne; Försth, Peter; Persson, Cecilia

Ingår i Journal of Functional Biomaterials, 2022

• DOI för Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty
• Ladda ner fulltext (pdf) av Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty

An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization

Nilsson Åhman, Hanna; Thorsson, Lena; Mellin, Pelle; Lindwall, Greta et al.

Ingår i Materials, 2022

• DOI för An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization
• Ladda ner fulltext (pdf) av An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization

A combined experimental and numerical method to estimate the elastic modulus of single trabeculae

Wu, Dan; Joffre, Thomas; Öhman, Caroline; Ferguson, Stephen et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2022

• DOI för A combined experimental and numerical method to estimate the elastic modulus of single trabeculae

A new bone adhesive candidate- does it work in human bone?: An ex-vivo preclinical evaluation in fresh human osteoporotic femoral head bone

Bojan, Alicja J.; Stadelmann, Vincent A.; Wu, Dan; Pujari-Palmer, Michael et al.

Ingår i Injury, s. 1858-1866, 2022

• DOI för A new bone adhesive candidate- does it work in human bone?: An ex-vivo preclinical evaluation in fresh human osteoporotic femoral head bone
• Ladda ner fulltext (pdf) av A new bone adhesive candidate- does it work in human bone?: An ex-vivo preclinical evaluation in fresh human osteoporotic femoral head bone

An ex-vivo model for the biomechanical assessment of cement discoplasty

Ghandour, Salim; Pazarlis, Konstantinos A.; Lewin, Susanne; Isaksson, Per et al.

Ingår i Frontiers in Bioengineering and Biotechnology, 2022

• DOI för An ex-vivo model for the biomechanical assessment of cement discoplasty
• Ladda ner fulltext (pdf) av An ex-vivo model for the biomechanical assessment of cement discoplasty

Biocompatibility of a Zr-Based Metallic Glass Enabled by Additive Manufacturing

Larsson, Lisa; Marattukalam, Jithin James; Paschalidou, Eirini-Maria; Hjörvarsson, Björgvin et al.

Ingår i ACS Applied Bio Materials, s. 5741-5753, 2022

• DOI för Biocompatibility of a Zr-Based Metallic Glass Enabled by Additive Manufacturing
• Ladda ner fulltext (pdf) av Biocompatibility of a Zr-Based Metallic Glass Enabled by Additive Manufacturing

Application of phase-field fracture theories and digital volume correlation to synchrotron X-ray monitored fractures in human trabecular bone: A case study

Braesch-Andersen, Anna; Wu, Dan; Ferguson, Stephen J.; Persson, Cecilia et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2022

• DOI för Application of phase-field fracture theories and digital volume correlation to synchrotron X-ray monitored fractures in human trabecular bone: A case study

Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

Skjöldebrand, Charlotte; Tipper, Joanne L; Hatto, Peter; Bryant, Michael et al.

Ingår i Materials Today Bio, 2022

• DOI för Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants
• Ladda ner fulltext (pdf) av Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants

Composite poly(L-lactic acid) - ceramic structures for fully degradable cranial implants

Grzeszczak, Ana; Åberg, Jonas; Persson, Cecilia

Ingår i Transactions on Additive Manufacturing Meets Medicine, 2022

• DOI för Composite poly(L-lactic acid) - ceramic structures for fully degradable cranial implants
• Ladda ner fulltext (pdf) av Composite poly(L-lactic acid) - ceramic structures for fully degradable cranial implants

Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures

Robo, Céline; Öhman, Caroline; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2021

• DOI för Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures
• Ladda ner fulltext (pdf) av Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures

Functional properties of low-modulus PMMA bone cements containing linoleic acid

Robo, Céline; Wenner, David; Ubhayasekera, S. J. Kumari A.; Hilborn, Jöns et al.

Ingår i Journal of Functional Biomaterials, 2021

• DOI för Functional properties of low-modulus PMMA bone cements containing linoleic acid
• Ladda ner fulltext (pdf) av Functional properties of low-modulus PMMA bone cements containing linoleic acid

Additively manufactured mesh-type titanium structures for cranial implants: E-PBF vs. L-PBF

Lewin, Susanne; Fleps, Ingmar; Åberg, Jonas; Ferguson, Stephen J. et al.

Ingår i Materials & design, 2021

• DOI för Additively manufactured mesh-type titanium structures for cranial implants: E-PBF vs. L-PBF
• Ladda ner fulltext (pdf) av Additively manufactured mesh-type titanium structures for cranial implants: E-PBF vs. L-PBF

Silk fibroin hydrogels induced and reinforced by acidic calcium phosphate: A simple way of producing bioactive and drug-loadable composites for biomedical applications

Dong, Zhiyun; Wu, Dan; Engqvist, Håkan; Luo, Jun et al.

Ingår i International Journal of Biological Macromolecules, s. 433-440, 2021

• DOI för Silk fibroin hydrogels induced and reinforced by acidic calcium phosphate: A simple way of producing bioactive and drug-loadable composites for biomedical applications

The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures

Grzeszczak, Ana; Lewin, Susanne; Eriksson, Olle; Kreuger, Johan et al.

Ingår i Materials, 2021

• DOI för The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures
• Ladda ner fulltext (pdf) av The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures

Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation

Lewin, Susanne; Linder, Lars Kihlstrom Burenstam; Birgersson, Ulrik; Gallinetti, Sara et al.

Ingår i Acta Biomaterialia, s. 502-513, 2021

• DOI för Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation
• Ladda ner fulltext (pdf) av Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation

Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds

Diez-Escudero, Anna; Andersson, Brittmarie; Persson, Cecilia; Hailer, Nils

Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, 2021

• DOI för Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds
• Ladda ner fulltext (pdf) av Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds

Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants

Lewin, Susanne; Fleps, Ingmar; Neuhaus, Dominique; Öhman, Caroline et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2020

• DOI för Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants
• Ladda ner fulltext (pdf) av Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants

Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

Skjöldebrand, Charlotte; Hulsart Billström, Gry; Engqvist, Håkan; Persson, Cecilia

Ingår i Materials, 2020

• DOI för Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach
• Ladda ner fulltext (pdf) av Si-Fe-C-N Coatings for Biomedical Applications: A Combinatorial Approach

The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications

Filho, Luimar; Schmidt, Susann; Goyenola, Cecilia; Skjöldebrand, Charlotte et al.

Ingår i Materials, 2020

• DOI för The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications
• Ladda ner fulltext (pdf) av The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications

Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design

Lewin, Susanne; Åberg, Jonas; Neuhaus, Dominique; Engqvist, Håkan et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2020

• DOI för Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design
• Ladda ner fulltext (pdf) av Mechanical behaviour of composite calcium phosphate-titanium cranial implants: Effects of loading rate and design

Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential

Diez-Escudero, Anna; Harlin, Hugo; Isaksson, Per; Persson, Cecilia

Ingår i Journal of Tissue Engineering, 2020

• DOI för Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential
• Ladda ner fulltext (pdf) av Porous polylactic acid scaffolds for bone regeneration: A study of additively manufactured triply periodic minimal surfaces and their osteogenic potential

Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants

Bang, Le T.; Filho, Luimar; Engqvist, Håkan; Xia, Wei et al.

Ingår i Journal of Biomedical Materials Research. Part B - Applied biomaterials, s. 429-438, 2020

• DOI för Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants

The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone

Wu, Dan; Pujari-Palmer, Michael; Bojan, Alicja; Palmquist, Anders et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2020

• DOI för The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone
• Ladda ner fulltext (pdf) av The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone

3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling

Wu, Dan; Spanou, Andrea; Diez-Escudero, Anna; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, 2020

• DOI för 3D-printed PLA/HA composite structures as synthetic trabecular bone: A feasibility study using fused deposition modeling

Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds

Yang, Jiaojiao; Chen, Song; Luo, Jun; Persson, Cecilia et al.

Ingår i ACS Applied Materials and Interfaces, s. 7403-7410, 2020

• DOI för Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds

The Effect of Al Addition on the Tribological Behavior of Ti-Si-Zr Alloys

Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Persson, Cecilia et al.

Ingår i Journal of tribology, 2019

• DOI för The Effect of Al Addition on the Tribological Behavior of Ti-Si-Zr Alloys

The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

Luo, Jun; Faivre, Julien; Engqvist, Håkan; Persson, Cecilia

Ingår i Materials, 2019

• DOI för The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness
• Ladda ner fulltext (pdf) av The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness

The Effect of Coating Density on Functional Properties of SiN_x Coated Implants

Filho, Luimar Correa; Schmidt, Susann; López, Alejandro; Cogrel, Mathilde et al.

Ingår i Materials, 2019

• DOI för The Effect of Coating Density on Functional Properties of SiN_x Coated Implants
• Ladda ner fulltext (pdf) av The Effect of Coating Density on Functional Properties of SiN_x Coated Implants

Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters

Barba, Albert; Diez-Escudero, Anna; Espanol, Montserrat; Bonany, Mar et al.

Ingår i ACS Applied Materials and Interfaces, s. 8818-8830, 2019

• DOI för Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes: Nanoscale Matters

Towards Functional Silicon Nitride Coatings for Joint Replacements

Filho, Luimar; Schmidt, Susann; Leifer, Klaus; Engqvist, Håkan et al.

Ingår i Coatings, 2019

• DOI för Towards Functional Silicon Nitride Coatings for Joint Replacements
• Ladda ner fulltext (pdf) av Towards Functional Silicon Nitride Coatings for Joint Replacements

Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems

Rothenbucher, Theresa S. P.; Ledin, Johan; Gibbs, David; Engqvist, Håkan et al.

Ingår i Acta Biomaterialia, s. 235-243, 2019

• DOI för Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems

Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells

Diez-Escudero, Anna; Torreggiani, Elena; Di Pompo, Gemma; Espanol, Montserrat et al.

Ingår i Journal of Tissue Engineering and Regenerative Medicine, s. 1217-1229, 2019

• DOI för Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells

A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation

van Dijk, Nico P.; Wu, Dan; Persson, Cecilia; Isaksson, Per

Ingår i International Journal of Solids and Structures, s. 211-227, 2019

• DOI för A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation
• Ladda ner fulltext (pdf) av A global digital volume correlation algorithm based on higher-order finite elements: Implementation and evaluation

A ready-to-use acidic, brushite-forming calcium phosphate cement

Luo, Jun; Engqvist, Håkan; Persson, Cecilia

Ingår i Acta Biomaterialia, s. 304-314, 2018

• DOI för A ready-to-use acidic, brushite-forming calcium phosphate cement
• Ladda ner fulltext (pdf) av A ready-to-use acidic, brushite-forming calcium phosphate cement

In vivo response to a low-modulus PMMA bone cement in an ovine model

Robo, Céline; Hulsart Billström, Gry; Nilsson, Malin; Persson, Cecilia

Ingår i Acta Biomaterialia, s. 362-370, 2018

• DOI för In vivo response to a low-modulus PMMA bone cement in an ovine model

Fatigue performance of a high-strength, degradable calcium phosphate bone cement

Ajaxon, Ingrid; Holmberg, Anders; Öhman, Caroline; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 46-52, 2018

• DOI för Fatigue performance of a high-strength, degradable calcium phosphate bone cement
• Ladda ner fulltext (pdf) av Fatigue performance of a high-strength, degradable calcium phosphate bone cement

Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty

Robo, Céline; Öhman, Caroline; Persson, Cecilia

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 70-76, 2018

• DOI för Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty

Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects

Díez-Escudero, Anna; Montserrat, Espanol; Bonany, Mar; Lu, Xi et al.

Ingår i Advanced Healthcare Materials, 2018

• DOI för Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects
• Ladda ner fulltext (pdf) av Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects

Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture

Barba, Albert; Maazouz, Yassine; Diez-Escudero, Anna; Rappe, Katrin et al.

Ingår i Acta Biomaterialia, s. 135-147, 2018

• DOI för Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture

Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out

Pujari-Palmer, Michael; Robo, Céline; Persson, Cecilia; Procter, Philip et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 624-633, 2018

• DOI för Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out

Stiffness and strength of cranioplastic implant systems in comparison to cranial bone

Persson, Johan; Helgason, Benedikt; Engqvist, Håkan; Ferguson, Stephen et al.

Ingår i Journal of Cranio-Maxillofacial Surgery, s. 418-423, 2018

• DOI för Stiffness and strength of cranioplastic implant systems in comparison to cranial bone

Trabecular deformations during screw pull-out: a micro-CT study of lapine bone

Joffre, Thomas; Isaksson, Per; Procter, Philip; Persson, Cecilia

Ingår i Biomechanics and Modeling in Mechanobiology, s. 1349-1359, 2017

• DOI för Trabecular deformations during screw pull-out: a micro-CT study of lapine bone
• Ladda ner fulltext (pdf) av Trabecular deformations during screw pull-out: a micro-CT study of lapine bone

In-situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth

Luo, Jun; Martinez-Casado, Francisco Javier; Balmes, Olivier; Yang, Jiaojiao et al.

Ingår i ACS Applied Materials and Interfaces, s. 36392-36399, 2017

• DOI för In-situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth

Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture

Barba, Albert; Diez-Escudero, Anna; Maazouz, Yassine; Rappe, Katrin et al.

Ingår i ACS Applied Materials and Interfaces, s. 41722-41736, 2017

• DOI för Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds: Effect of Nanostructure and Pore Architecture

Elastic properties and strain-to-crack-initation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique

Ajaxon, Ingrid; Acciaioli, Alice; Lionello, Giacomo; Ginebra, Maria-Pau et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 428-437, 2017

• DOI för Elastic properties and strain-to-crack-initation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique
• Ladda ner fulltext (pdf) av Elastic properties and strain-to-crack-initation of calcium phosphate bone cements: Revelations of a high-resolution measurement technique

Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition

Ajaxon, Ingrid; Öhman Mägi, Caroline; Persson, Cecilia

Ingår i Journal of materials science. Materials in medicine, 2017

• DOI för Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition
• Ladda ner fulltext (pdf) av Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition

Long-term sensory disturbances after orbitozygomatic fractures

Neovius, Erik; Fransson, Maria; Persson, Cecilia; Clarliden, Sophie et al.

Ingår i Journal of Plastic, Reconstructive & Aesthetic Surgery, s. 120-126, 2017

• DOI för Long-term sensory disturbances after orbitozygomatic fractures

Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography

Joffre, Thomas; Segerholm, Kristoffer; Persson, Cecilia; Bardage, Stig L. et al.

Ingår i Industrial crops and products (Print), s. 43-49, 2017

• DOI för Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography

Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements

Skjöldebrand, Charlotte; Schmidt, Susann; Vuong, Vicky; Pettersson, Maria et al.

Ingår i Materials, 2017

• DOI för Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements
• Ladda ner fulltext (pdf) av Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements

Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM

Lewin, Susanne; Barba, Albert; Persson, Cecilia; Franch Serracanta, Jordi et al.

Ingår i Biomedical Materials, 2017

• DOI för Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM
• Ladda ner fulltext (pdf) av Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM

Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues

Tummala, Gopi Krishna; Joffre, Thomas; Rojas, Ramiro; Persson, Cecilia et al.

Ingår i Soft Matter, s. 3936-3945, 2017

• DOI för Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues
• Ladda ner fulltext (pdf) av Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues

A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

Gallinetti, Sara; Mestres, Gemma; Canal, Cristina; Persson, Cecilia et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 495-503, 2017

• DOI för A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement
• Ladda ner fulltext (pdf) av A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement

Micrometre-sized magnesium whitlockite crystals in micropetrosis of bisphosphonate-exposed human alveolar bone

Shah, Furqan; Lee, Bryan; Tedesco, James; Larsson Wexell, Cecilia et al.

Ingår i Nano letters (Print), s. 6210-6216, 2017

• DOI för Micrometre-sized magnesium whitlockite crystals in micropetrosis of bisphosphonate-exposed human alveolar bone

Ceramic cement as a potential stand-alone treatment for bone fractures: an in vitro study of ceramic-bone composites

Koh, Ilsoo; Gombert, Yvonne; Persson, Cecilia; Engqvist, Håkan et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 519-529, 2016

• DOI för Ceramic cement as a potential stand-alone treatment for bone fractures: an in vitro study of ceramic-bone composites

The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement

Persson, Cecilia; López, Alejandro; Fathali, Hoda; Hoess, Andreas et al.

Ingår i Biomatter, 2016

• DOI för The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement
• Ladda ner fulltext (pdf) av The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement

Dissolution behaviour of silicon nitride coatings for joint replacements

Pettersson, Maria; Bryant, Michael; Schmidt, Susann; Engqvist, Håkan et al.

Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 497-505, 2016

• DOI för Dissolution behaviour of silicon nitride coatings for joint replacements
• Ladda ner fulltext (pdf) av Dissolution behaviour of silicon nitride coatings for joint replacements

Morphology and dissolution rate of wear debris from silicon nitride coatings

Pettersson, Maria; Skjöldebrand, Charlotte; Filho, Luimar; Engqvist, Håkan et al.

Ingår i ACS Biomaterials Science & Engineering, s. 998-1004, 2016

• DOI för Morphology and dissolution rate of wear debris from silicon nitride coatings
• Ladda ner fulltext (pdf) av Morphology and dissolution rate of wear debris from silicon nitride coatings

Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements

Luo, Jun; Ajaxon, Ingrid; Ginebra, Maria Pau; Engqvist, Håkan et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 617-627, 2016

• DOI för Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements
• Ladda ner fulltext (pdf) av Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements

Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements

Hoess, Andreas; López, Alejandro; Engqvist, Håkan; Ott, Marjam et al.

Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 274-282, 2016

• DOI för Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements

Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications

Tummala, Gopi Krishna; Joffre, Thomas; Lopes, Viviana; Liszka, Aneta et al.

Ingår i ACS Biomaterials Science & Engineering, s. 2072-2079, 2016

• DOI för Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications

Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals

Vuong, Vicky; Pettersson, Maria; Persson, Cecilia; Larsson, Sune et al.

Ingår i Annals of Biomedical Engineering, s. 1685-1697, 2016

• DOI för Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals
• Ladda ner fulltext (pdf) av Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals

Brushite foamsthe effect of Tween (R) 80 and Pluronic (R) F-127 on foam porosity and mechanical properties

Unosson, Johanna; Montufar, Edgar B.; Engqvist, Håkan; Ginebra, Maria-Pau et al.

Ingår i Journal of Biomedical Materials Research. Part B - Applied biomaterials, s. 67-77, 2016

• DOI för Brushite foamsthe effect of Tween (R) 80 and Pluronic (R) F-127 on foam porosity and mechanical properties
• Ladda ner fulltext (pdf) av Brushite foamsthe effect of Tween (R) 80 and Pluronic (R) F-127 on foam porosity and mechanical properties

Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement

Mestres, Gemma; Kugiejko, Karol; Pastorino, David; Unosson, Johanna et al.

Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 88-96, 2016

• DOI för Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement
• Ladda ner fulltext (pdf) av Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement

An evaluation of methods to determine the porosity of calcium phosphate cements

Engstrand Unosson, Johanna; Persson, Cecilia; Engqvist, Håkan

Ingår i Journal of Biomedical Materials Research. Part B - Applied biomaterials, s. 62-71, 2015

• DOI för An evaluation of methods to determine the porosity of calcium phosphate cements
• Ladda ner fulltext (pdf) av An evaluation of methods to determine the porosity of calcium phosphate cements

Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses

Oladokun, A.; Pettersson, M.; Bryant, M.; Engqvist, Håkan et al.

Ingår i Tribology - Materials, Surfaces & Interfaces, s. 165-173, 2015

• DOI för Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses

Porosity prediction of calcium phosphate cements based on chemical composition

Öhman, Caroline; Unosson, Johanna; Carlsson, Elin; Ginebra, Maria-Pau et al.

Ingår i Journal of materials science. Materials in medicine, 2015

• DOI för Porosity prediction of calcium phosphate cements based on chemical composition
• Ladda ner fulltext (pdf) av Porosity prediction of calcium phosphate cements based on chemical composition

Influence of alkali metal additives on phase transition of translucent ZrO2/SiO2 glass ceramics prepared by a sol-gel method

Fu, Le; Andersson, Martin; Unosson, Erik; Persson, Cecilia et al.

Ingår i European Cells & Materials, s. 10, 2015

In vitro and in vivo response to low-modulus PMMA-based bone cement

Carlsson, Elin; Mestres, Gemma; Treerattrakoon, Kiatnida; Lopez, Alejandro et al.

Ingår i BioMed Research International, 2015

• DOI för In vitro and in vivo response to low-modulus PMMA-based bone cement
• Ladda ner fulltext (pdf) av In vitro and in vivo response to low-modulus PMMA-based bone cement

Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient?

Hedberg, Yolanda; Pettersson, Maria; Pradhan, Sulena; Odnevall Wallinder, Inger et al.

Ingår i ACS Biomaterials Science & Engineering, s. 617-620, 2015

• DOI för Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient?
• Ladda ner fulltext (pdf) av Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient?

Evaluation of a porosity measurement method for wet calcium phosphate cements

Ajaxon, Ingrid; Maazouz, Yassine; Ginebra, Maria-Pau; Öhman, Caroline et al.

Ingår i Journal of biomaterials applications, s. 526-536, 2015

• DOI för Evaluation of a porosity measurement method for wet calcium phosphate cements
• Ladda ner fulltext (pdf) av Evaluation of a porosity measurement method for wet calcium phosphate cements

Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution

Ajaxon, Ingrid; Öhman, Caroline; Persson, Cecilia

Ingår i BioMed Research International, 2015

• DOI för Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution
• Ladda ner fulltext (pdf) av Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution

Impoverishment of media by bioactive hydroxyapatite hinders cell proliferation

Mestres, Gemma; Espanol, Montse; Persson, Cecilia; Ginebra, Maria-Pau et al.

Ingår i European Cells & Materials, s. 36-36, 2015

Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres

Qin, Tao; Lopez, Alejandro; Öhman, Caroline; Engqvist, Håkan et al.

Ingår i Journal of Applied Biomaterials & Functional Materials, 2015

• DOI för Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres
• Ladda ner fulltext (pdf) av Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres

Persistent diplopia after fractures involving the orbit related to nerve injury

Neovius, Erik; Fransson, Maria; Matthis, Sköld Peter; Persson, Cecilia et al.

Ingår i Journal of Plastic, Reconstructive & Aesthetic Surgery, s. 219-225, 2015

• DOI för Persistent diplopia after fractures involving the orbit related to nerve injury

Inflammatory response to nano- and microstructured hydroxyapatite

Mestres, Gemma; Espanol, Montserrat; Xia, Wei; Persson, Cecilia et al.

Ingår i PLOS ONE, 2015

• DOI för Inflammatory response to nano- and microstructured hydroxyapatite
• Ladda ner fulltext (pdf) av Inflammatory response to nano- and microstructured hydroxyapatite

The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements

Persson, Cecilia; Robert, Elise; Carlsson, Elin; Robo, Céline et al.

Ingår i Journal of biomaterials applications, s. 279-289, 2015

• DOI för The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements
• Ladda ner fulltext (pdf) av The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements

Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study

Holub, Ondrej; López, Alejandro; Borse, Vishal; Engqvist, Håkan et al.

Ingår i Journal of Biomechanics, s. 3258-3266, 2015

• DOI för Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study
• Ladda ner fulltext (pdf) av Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty: A human ex vivo study

Scavenging effect of Trolox released from brushite cements

Mestres, Gemma; Santos, Carlos F; Engman, Lars; Persson, Cecilia et al.

Ingår i Acta Biomaterialia, s. 459-466, 2015

• DOI för Scavenging effect of Trolox released from brushite cements

Calcium phosphate cements with strontium halides as radiopacifiers

López, Alejandro; Montazerolghaem, Maryam; Engqvist, Håkan; Ott, Marjam Karlsson et al.

Ingår i Journal of Biomedical Materials Research. Part B - Applied biomaterials, s. 250-259, 2014

• DOI för Calcium phosphate cements with strontium halides as radiopacifiers

The effect of composition on mechanical properties of brushite cements

Engstrand, Johanna; Persson, Cecilia; Engqvist, Håkan

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 81-90, 2014

• DOI för The effect of composition on mechanical properties of brushite cements
• Ladda ner fulltext (pdf) av The effect of composition on mechanical properties of brushite cements

Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model

López, Alejandro; Mestres, Gemma; Karlsson Ott, Marjam; Engqvist, Håkan et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 245-256, 2014

• DOI för Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model
• Ladda ner fulltext (pdf) av Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model

Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

Tkachenko, Serhii; Datskevich, Oleg; Kulak, Leonid; Jacobson, Staffan et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 61-72, 2014

• DOI för Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications

Assessing cement injection behaviour in cancellous bone: An in vitro study using flow models

Bou-Francis, Antony; Lopez, Alejandro; Persson, Cecilia; Hall, Richard M. et al.

Ingår i Journal of biomaterials applications, s. 582-594, 2014

• DOI för Assessing cement injection behaviour in cancellous bone: An in vitro study using flow models

Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers

Lukaszczyk, Jan; Janicki, Bartosz; Lopez, Alejandro; Skolucka, Karolina et al.

Ingår i Materials science & engineering. C, biomimetic materials, sensors and systems, s. 76-84, 2014

• DOI för Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers

Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks

Maazouz, Y.; Montufar, E. B.; Guillem-Marti, J.; Fleps, I. et al.

Ingår i Journal of materials chemistry. B, s. 5378-5386, 2014

• DOI för Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks

Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty

Ajaxon, Ingrid; Persson, Cecilia

Ingår i Biomechanics and Modeling in Mechanobiology, s. 1199-1207, 2014

• DOI för Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty
• Ladda ner fulltext (pdf) av Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty

Comparative characterization of oligomeric precursors intended for injectable implants

López, Alejandro; Persson, Cecilia; Hilborn, Jöns; Rojas, Ramiro

Ingår i Polymers for Advanced Technologies, s. 15-21, 2013

• DOI för Comparative characterization of oligomeric precursors intended for injectable implants

Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal^®V modified with linoleic acid

López, Alejandro; Mestres, Gemma; Karlsson Ott, Marjam; Engqvist, Håkan et al.

Ingår i European Cells & Materials, 2013

• Ladda ner fulltext (pdf) av Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal^®V modified with linoleic acid

Immune responses to topographically different calcium phosphate cements

Mestres, Gemma; Espanol, Montse; Persson, Cecilia; Ginebra, Maria-Pau et al.

Ingår i European Cells & Materials, s. 19-19, 2013

Stability and prospect of UV/H₂O₂ activated titania films for biomedical use

Unosson, Erik; Welch, Ken; Persson, Cecilia; Engqvist, Håkan

Ingår i Applied Surface Science, s. 317-323, 2013

• DOI för Stability and prospect of UV/H₂O₂ activated titania films for biomedical use
• Ladda ner fulltext (pdf) av Stability and prospect of UV/H₂O₂ activated titania films for biomedical use

Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

Pettersson, Maria; Berlind, Torun; Schmidt, Susann; Jacobson, Staffan et al.

Ingår i Surface & Coatings Technology, s. 827-834, 2013

• DOI för Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements

Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

Pettersson, Maria; Tkachenko, S.; Schmidt, S.; Berlind, T. et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 41-47, 2013

• DOI för Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements

Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement

Engstrand, Johanna; Persson, Cecilia; Engqvist, Håkan

Ingår i Biomatter, 2013

• DOI för Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement
• Ladda ner fulltext (pdf) av Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement

Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone

Widmer Soyka, Rene P.; López, Alejandro; Persson, Cecilia; Cristofolini, Luca et al.

Ingår i Journal of The Mechanical Behavior of Biomedical Materials, s. 43-53, 2013

• DOI för Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone

Variation in Calvarial Bone Healing Capacity: A Clinical Study on the Effects of BMP-2-Hydrogel or Bone Autograft Treatments at Different Cranial Locations

Skogh, Ann-Charlott Docherty; Kihlstrom, Lars; Neovius, Erik; Persson, Cecilia et al.

Ingår i The Journal of craniofacial surgery (Print), s. 339-343, 2013

• DOI för Variation in Calvarial Bone Healing Capacity: A Clinical Study on the Effects of BMP-2-Hydrogel or Bone Autograft Treatments at Different Cranial Locations

Nano grain sized zirconia–silica glass ceramics for dental applications

Persson, Cecilia; Unosson, Erik; Ajaxon, Ingrid; Engstrand, Johanna et al.

Ingår i Journal of the European Ceramic Society, s. 4105-4110, 2012

• DOI för Nano grain sized zirconia–silica glass ceramics for dental applications

A self-hardening biodegradable cement as a drug delivery vehicle

Mellgren, Torbjörn; Forsgren, Johan; Mihranyan, Albert; Engqvist, Håkan et al.

Ingår i European Cells & Materials, s. 51-51, 2012

• Ladda ner fulltext (pdf) av A self-hardening biodegradable cement as a drug delivery vehicle

Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

Olofsson, Johanna; Grehk, T. Mikael; Berlind, Torun; Persson, Cecilia et al.

Ingår i Biomatter, s. 94-102, 2012

• DOI för Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement

Fabrication and evaluation of Si_xN_y coatings for total joint replacements

Olofsson, Johanna; Pettersson, Maria; Teuscher, Nico; Heilmann, Andreas et al.

Ingår i Journal of materials science. Materials in medicine, s. 1879-1889, 2012

• DOI för Fabrication and evaluation of Si_xN_y coatings for total joint replacements

Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials

Engstrand, Johanna; López, Alejandro; Engqvist, Håkan; Persson, Cecilia

Ingår i Biomedical Materials, 2012

• DOI för Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials

Photocatalytic activity of low temperature oxidized Ti-6Al-4V

Unosson, Erik; Persson, Cecilia; Welch, Ken; Engqvist, Håkan

Ingår i Journal of materials science. Materials in medicine, s. 1173-1180, 2012

• DOI för Photocatalytic activity of low temperature oxidized Ti-6Al-4V
• Ladda ner fulltext (pdf) av Photocatalytic activity of low temperature oxidized Ti-6Al-4V

Premixed calcium silicate cement for endodontic applications

Persson, Cecilia; Engqvist, Håkan

Ingår i Biomatter, s. 76-80, 2011

• DOI för Premixed calcium silicate cement for endodontic applications
• Ladda ner fulltext (pdf) av Premixed calcium silicate cement for endodontic applications

Premixed calcium silicate cement for endodontic applications: Injectability, setting time and radiopacity

Persson, Cecilia; Engqvist, Håkan

Ingår i Biomatter, s. 76-80, 2011

Low-modulus PMMA bone cement modified with castor oil

López, Alejandro; Hoess, Andreas; Thersleff, Thomas; Ott, Marjam et al.

Ingår i Bio-medical materials and engineering, s. 323-332, 2011

• DOI för Low-modulus PMMA bone cement modified with castor oil
• Ladda ner fulltext (pdf) av Low-modulus PMMA bone cement modified with castor oil

Photocatalytic Activity of Low Temperature Oxidized Ti-6Al-4V

Unosson, Erik; Persson, Cecilia; Welch, Ken; Engqvist, Håkan

Ingår i European Cells & Materials, s. 20-20, 2011

• Ladda ner fulltext (pdf) av Photocatalytic Activity of Low Temperature Oxidized Ti-6Al-4V

Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation

López, Alejandro; Unosson, Erik; Engqvist, Håkan; Persson, Cecilia

Ingår i Journal of materials science. Materials in medicine, s. 1599-1606, 2011

• DOI för Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation

Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO₃ for intervertebral disk augmentation

López, Alejandro; Persson, Cecilia; Hilborn, Jöns; Engqvist, Håkan

Ingår i Journal of Biomedical Materials Research. Part B - Applied biomaterials, s. 75-83, 2010

• DOI för Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO₃ for intervertebral disk augmentation
• Ladda ner fulltext (pdf) av Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO₃ for intervertebral disk augmentation

Changes of Surface Composition and Morphology after Incorporation of Ions into Biomimetic Apatite Coating

Xia, Wei; Lindahl, Carl; Persson, Cecilia; Thomsen, Peter et al.

Ingår i Journal of Biomaterials and Nanobiotechnology, s. 7-16, 2010

• DOI för Changes of Surface Composition and Morphology after Incorporation of Ions into Biomimetic Apatite Coating

Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium

Skjöldebrand, Charlotte; Echeverri Correa, Estefania; Hulsart Billström, Gry; Persson, Cecilia

Ingår i Biomaterials Science

Density and mechanical properties of vertebral trabecular bone-A review

Öhman, Caroline; Holub, Ondrej; Wu, Dan; Hall, Richard M. et al.

Ingår i JOR SPINE, 2021

• DOI för Density and mechanical properties of vertebral trabecular bone-A review
• Ladda ner fulltext (pdf) av Density and mechanical properties of vertebral trabecular bone-A review

Young’s modulus of trabecular bone at the tissue level: A review

Wu, Dan; Isaksson, Per; Ferguson, Stephen; Persson, Cecilia

Ingår i Acta Biomaterialia, s. 1-12, 2018

• DOI för Young’s modulus of trabecular bone at the tissue level: A review
• Ladda ner fulltext (pdf) av Young’s modulus of trabecular bone at the tissue level: A review

Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook

Persson, Cecilia; Berg, Svante

Ingår i Journal of materials science. Materials in medicine, s. 1-10, 2013

• DOI för Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook
• Ladda ner fulltext (pdf) av Strategies towards injectable, load-bearing materials for the intervertebral disc: a review and outlook

Data deposit for the study entitled : "The effect of PCL addition on 3D-printable PLA/HA composite filaments for the treatment of bone defects"

Åkerlund, Elin; Diez-Escudero, Anna; Grzeszczak, Ana; Persson, Cecilia

2022

Induced Formation of Plasma Membrane Protrusions with Porous Materials as Instructive Surfaces

Aramesh, Morteza; Persson, Cecilia

Ingår i Imaging Cell Signaling, s. 27-34, Humana Press, 2024

• DOI för Induced Formation of Plasma Membrane Protrusions with Porous Materials as Instructive Surfaces

Silicon Nitride Coatings and Biologic Applications

Skjöldebrand, Charlotte; Engqvist, Håkan; Persson, Cecilia; McEntire, Bryan J.

Ingår i Silicon Nitride Bioceramics, s. 237-259, Springer, 2024

• DOI för Silicon Nitride Coatings and Biologic Applications

Mechanical Properties of Brushite Calcium Phosphate Cements

Ajaxon, Ingrid; Persson, Cecilia

Ingår i The World Scientific Encyclopedia of Nanomedicine and Bioengineering II: Bioimplants, Regenerative Medicine, and Nano-Cancer Diagnosis and Phototherapy, World Scientific Pte Ltd., 2017

• DOI för Mechanical Properties of Brushite Calcium Phosphate Cements

Understanding crystal nucleation and growth in the Mg-Zn-Ca system for additive manufacturing of resorbable implants

Alonso Rancurel, Belén; Persson, Cecilia; Martin, Fisk; D'Elia, Francesco et al.

2025

Dynamic response of additively manufactured WE43 lattice structures under high-strain compression

Alomar, Zaki; Bratislav, Lukic; Persson, Cecilia; Isaksson, Per et al.

2025

In-depth microstructural characterisation and evaluation of mechanical properties of additively manufactured biodegradable Zn-xMg alloys

Abenayake, Himesha; Persson, Cecilia; D'Elia, Francesco

Ingår i Abstracts, s. 47-47, 2025

• Ladda ner fulltext (pdf) av In-depth microstructural characterisation and evaluation of mechanical properties of additively manufactured biodegradable Zn-xMg alloys

Natural ageing and static recrystallisation effects of additively manufactured biodegradable pure Zn and Zn-Mg alloys

Abenayake, Himesha; Dieter, Luisa; Persson, Cecilia; D'Elia, Francesco

2025

Strut-Based vs. TPMS Lattices: How Topology Influences the Mechanical and Corrosion Properties of Additively Manufactured WE43 Magnesium Implants

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2025

Using TC-Python for application of classical nucleation and growth theory in an additively manufactured MgZnCa alloy

Alonso Rancurel, Belén; D'Elia, Francesco; Fisk, Martin; Persson, Cecilia

2025

• Ladda ner fulltext (pdf) av Using TC-Python for application of classical nucleation and growth theory in an additively manufactured MgZnCa alloy

Powder-based precipitation simulation of a MgZnCa alloy

Alonso Rancurel, Belén; Shtender, Vitalii; Primetzhofer, Daniel; D'Elia, Francesco et al.

2025

Investigating the Impact of Extracellular Vesicles on the Cytocompatibility of Low-Modulus PMMA Bone Cement

Hong, Linglu; Persson, Cecilia; Tenje, Maria; Chrzanowski, Wojciech et al.

2025

Porosity predictions in additive manufacturing of Mg alloy WE43 using a Gaussian Process methodology

Ramesh Babu, Shashank; Sjölund, Jens; Persson, Cecilia

2025

Additive manufacturing of magnesium alloy WE43 for biomedical applications

Larsson, Lisa; Nilsson Åhman, Hanna; D'Elia, Francesco; Persson, Cecilia

2025

Geometric Design of Additively Manufactured WE43 Magnesium Lattices: Controlling Degradation and Strength Through Topology

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2025

Printability, mechanical properties and corrosion resistance of WE43 magnesium alloy porous scaffolds processed by laser-powder bed fusion

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2025

Printability, microstructure formation, and material properties during L-PBF of binary Mg-Li alloys

Kotiadis, Stephanie; Persson, Cecilia; D'Elia, Francesco

2025

Characterization of processability and microstructure formation during L-PBF of ultralight binary Mg-Li alloys

Kotiadis, Stephanie; Persson, Cecilia; D'Elia, Francesco

2025

Skin-Derived Hydrogels for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Skin-derived hydrogels for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Effects of CoCr- and SiN-derived particles on glial cells: implications for spinal implant safety

Echeverri Correa, Estefania; O'Callaghan, Paul; Ferraz, Natalia; Hulsart Billström, Gry et al.

2025

Glial cell responses to CoCr- and SiN-derived particles from spinal implants

Echeverri Correa, Estefania; O'Callaghan, Paul; Ferraz, Natalia; Hulsart Billström, Gry et al.

2025

Skin derived bioinks for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Skin derived bioinks for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Bergquist, Ira; Persson, Cecilia et al.

2025

Relationship between rheological properties and biological activity of porcine skin derived-hydrogels for 3D cell culture

Palierse, Estelle; Persson, Cecilia; Aramesh, Morteza

2025

Microstructural characterisation and evaluation of mechanical properties of additively manufactured biodegradable Zn-xMg alloys

Abenayake, Himesha; Persson, Cecilia; D'Elia, Francesco

2024

CALPHAD description and FEM of AM Mg-based biodegradable alloys for biomedical applications

Alonso Rancurel, Belén; Cavaliere, Giulio; D'Elia, Francesco; Fisk, Martin et al.

2024

• Ladda ner fulltext (pdf) av CALPHAD description and FEM of AM Mg-based biodegradable alloys for biomedical applications

Mitigating Poor Corrosion Resistance of WE43Mg Alloy Lattice Structures through Optimized Structural Design

Alomar, Zaki; Minárik, Peter; Persson, Cecilia; Drozdenko, Daria et al.

Ingår i 16th Symposium on Biodegradable Metals, Krakow, Poland, 2024

Laser-Powder Bed Fusion of WE43 Magnesium Alloy for Biomedical Applications: Exploring the Synergy of Design, Printability, and Degradability

Alomar, Zaki; Persson, Cecilia; D'Elia, Francesco

2024

Investigation of linoleic acid as an antibacterial additive in bone cement

Hong, Linglu; Hjort, Karin; Andersson, Dan I.; Persson, Cecilia

2024

Towards modelling the PBF-LB process of a MgZnCa alloy

Alonso Rancurel, Belén; D'Elia, Francesco; Fisk, Martin; Persson, Cecilia

Ingår i Agenda and Abstracts, s. 155-155, 2024

Unveiling the relation between mechanical properties, cytocompatibility, and printability of decellularized extracellular matrix bioinks

Hong, Linglu; Palierse, Estelle; Persson, Cecilia; Aramesh, Morteza

Ingår i the 12th World Biomaterials Congress (WBC), Daegu, South Korea, May 26-31, 2024., 2024, 2024

Decellularized extracellular matrix bioinks for 3D bioprinting

Palierse, Estelle; Mihailescu, Alexia Maria; Persson, Cecilia; Aramesh, Morteza

2024

Porcine skin-derived hydrogels as bioink

Palierse, Estelle; Mihailescu, Alexia Maria; Persson, Cecilia; Aramesh, Morteza

2024

In vitro cell study of calcium phosphate cement-PLLA models for hard-tissue implants

Echeverri Correa, Estefania; Grzeszczak, Ana; Åberg, Jonas; Hulsart Billström, Gry et al.

2024

Towards the development of fully resorbable composite cranial implants: in vitro cell response to calcium phosphate cement-PLLA composite structures

Grzeszczak, Ana; Echeverri Correa, Estefania; Åberg, Jonas; Hulsart Billström, Gry et al.

2024

Antibiofilm Properties of Linoleic Acid-loaded Bone Cement with and without Gentamicin

Hong, Linglu; Hjort, Karin; Persson, Cecilia; Andersson, Dan I.

Ingår i 33rd Annual Conference of the European Society for Biomaterials, s. 46-46, 2023

Using neutron diffraction to reveal the effect of build direction and laser scan strategy on texture formation in an additively manufactured magnesium alloy

Larsson, Lisa; D'Elia, Francesco; Maimaitiyili, Tuerdi; Sahlberg, Martin et al.

2023

In vitro 3D model for monitoring glial cell responses to particles and ions released from spinal implants

Echeverri Correa, Estefania; O'Callaghan, Paul; Kreuger, Johan; Persson, Cecilia

2023

Towards a bioprinted spinal cord model for monitoring cell responses to particles and ions released from spinal implants

Echeverri Correa, Estefania; O'Callaghan, Paul; Kreuger, Johan; Persson, Cecilia

Ingår i TERMIS 2023 – European ChapterManchester Central Conference Centre Manchester, UK March 28–31, 2023, 2023

• DOI för Towards a bioprinted spinal cord model for monitoring cell responses to particles and ions released from spinal implants

Degradation of poly(L-lactic acid)-calcium phosphate cement structures for degradable cranial implants

Grzeszczak, Ana; Åberg, Jonas; Persson, Cecilia

2023

Reducing the dissolution rate of silicon nitride coatings for spinal implants using Fe and C as alloying elements

Echeverri Correa, Estefania; Skjöldebrand, Charlotte; Palmquist, Anders; Hulsart Billström, Gry et al.

2023

Metal Release of CoCrMo Alloy in Protein-Rich Solutions–Effect of Sliding and Manufacturing Process

Wei, Zheng; Romanovski, Valentin; Filho, Luimar; Persson, Cecilia et al.

Ingår i Corrosion in a Changing World – Energy, Mobility, Digitalization, 2022

Residual Stresses in an Additively Manufactured Biodegradable Magnesium Alloy

Larsson, Lisa; Nilsson Åhman, Hanna; Maimaitiyili, Tuerdi; Persson, Cecilia

Ingår i eCM Meeting Abstracts 2022, Collection 2, s. 11-11, 2022

Neutron and Synchrotron measurements of Residual Stress in a Magnesium alloy produced by Powder Bed Fusion – Laser Beam

Larsson, Lisa; Nilsson-Åhman, Hanna; Maimaitiyili, Tuerdi; Persson, Cecilia

2022

The impact of Residual Stresses formed during PBF-LB on the Biodegradability of Magnesium alloys

Larsson, Lisa; Nilsson-Åhman, Hanna; Maimaitiyili, Tuerdi; Persson, Cecilia

2022

Powder bed fusion of a biodegradable magnesium alloy: the effect of laser scan strategy and build direction on microstructure and mechanical properties

Larsson, Lisa; D'Elia, Francesco; Persson, Cecilia

2022

Additive manufacturing of biodegradable magnesium alloys

Larsson, Lisa; Nilsson Åhman, Hanna; D'Elia, Francesco; Maimaitiyili, Tuerdi et al.

2022

On the Residual Stress in Biodegradable Magnesium Alloys Produced by Powder Bed Fusion Laser Beam

Larsson, Lisa; Nilsson Åhman, Hanna; Maimaitiyili, Tuerdi; Persson, Cecilia

2022

Can 3D-printed poly(L-lactic acid) be used as support structure for fullyresorbable ceramic cranial implants ?: A preliminary study

Grzeszczak, Ana; Åberg, Jonas; Persson, Cecilia

Ingår i Abstracts, s. 72-72, 2022

Poly(L-lactic acid) and Ceramic Composite Structures for Fully Resorbable Cranial Implants

Grzeszczak, Ana; Åberg, Jonas; Persson, Cecilia

2022

Decreasing the dissolution rate of silicon nitride coatings for spinal implants by the addition of Fe and C

Echeverri Correa, Estefania; Skjöldebrand, Charlotte; Hulsart Billström, Gry; Persson, Cecilia

2022

Dissolution Behaviour and Biocompatibility of Combinatorially Sputtered SiFeCN Coatings for Spinal Implants

Echeverri Correa, Estefania; Skjöldebrand, Charlotte; Hulsart Billström, Gry; Persson, Cecilia

2022

Numerical discretization of trabecular bone based on Voronoi tessellation

Zhou, Yijun; Isaksson, Per; Persson, Cecilia

2021

An ex-vivo Biomechanical Assessment of Cement Discoplasty

Ghandour, Salim; Pazarlis, Konstantinos; Lewin, Susanne; Isaksson, Per et al.

2021

A model for the biomechanical assessment of discoplasty in a laboratory setting

Ghandour, Salim; Lewin, Susanne; Pazarlis, Konstantinos A.; Isaksson, Per et al.

2021

Stereolithography shows potential in additive manufacturing ofsynthetic trabecular bone structures

Grzeszczak, Ana; Lewin, Susanne; Eriksson, Olle; Kreuger, Johan et al.

Ingår i Stereolithography shows potential in additive manufacturing ofsynthetic trabecular bone structures, 2021

Influence of Hot Isostatic Pressing on the corrosion resistance of Mg-4wt%Y-3wt%Nd processed by Laser - Powder Bed Fusion

Nilsson Åhman, Hanna; Mellin, Pelle; Persson, Cecilia

2021

Mechanical and Structural Evaluation of Synthetic Trabecular Bone Models Printed with Stereolithography

Grzeszczak, Ana; Lewin, Susanne; Eriksson, Olle; Kreuger, Johan et al.

Ingår i Mechanical and Structural Evaluation of Synthetic Trabecular Bone Models Printed with Stereolithography, 2021

Dissolution and biocompatibility of combinatorially sputtered SiCrNbN coatings

Echeverri Correa, Estefania; Skjöldebrand, Charlotte; Hulsart Billström, Gry; Persson, Cecilia

2021

Biocompatibility of an additively manufactured zirconium-based bulk metallic glass: Effect of surface roughness on osteoblastic cell response

Marattukalam, JJ.; Larsson, L.; Hjörvarsson, Björgvin; Ferraz, Natalia et al.

Ingår i Swedish Arena for Metal Additive Manufacturing 2021., 2021

Osteoblastic cell response to an additively manufactured zirconium-based bulk metallic glass

Marattukalam, JJ; Larsson, L; Hjörvarsson, Björgvin; Ferraz, Natalia et al.

Ingår i 31^st Conference of the European Society for Biomaterials., 2021

Computational and experimental microstructural characterization of a magnesium WE43 Alloy processed on a commercially available PBF-LB machine

Nilsson Åhman, Hanna; Thorsson, Lena; Rohimsyah, Fikan; Mellin, Pelle et al.

2020

Tribocorrosive performance of silicon nitride based coatings in a hard-on-soft contact

Filho, Luimar; Schmidt, Susann; López, Alejandro; Goyenola, Cecilia et al.

2019

Effect of Deposition Parameters on the Tribocorrosive Performance of Silicon Nitride Based Coatings

Filho, Luimar; Schmidt, Susann; Goyenola, Cecilia; Skjöldebrand, Charlotte et al.

2019

Recombinant silk with calcium phosphates as macroporous bone scaffolds

Diez-Escudero, Anna; Liu, Yuling; Lançon, Victorine; Widhe, Mona et al.

2019

Wear resistance of silicon nitride coatings in a hard-on-soft contact

Filho, Luimar; López, Alejandro; Schmidt, Susann; Högberg, Hans et al.

2018

Compositional Dependence Of Hardness And Modulus Of Sinfec Coatings

Skjöldebrand, Charlotte; Engqvist, Håkan; Persson, Cecilia

Ingår i 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, Lisbon, Portugal 26-29 March, 2018, 2018

Evaluation of bioactive cranial implants: preliminary results from volumetric quantifications using computed tomography (CT)

Lewin, Susanne; Gallinetti, Sara; Kihlström, Lars; Persson, Cecilia et al.

2018

Longitudinal assessment of trends in calcium phosphate degradation for cranial implants: preliminary results from two patients

Lewin, Susanne; Gallinetti, Sara; Persson, Cecilia; Kihlström, Lars et al.

2018

Biocompatibility of co-sputtered Si-Fe-C-N coatings

Skjöldebrand, Charlotte; Hulsart Billström, Gry; Engqvist, Håkan; Persson, Cecilia

2018

Combinatorial coating development of Si-N-Fe-C coatings for joint implants

Skjöldebrand, Charlotte; Hulsart Billström, Gry; Engqvist, Håkan; Persson, Cecilia

2018

Wear resistance and ion release of SiN_x coatings on CoCrMo full head implants

Filho, Luimar; López, Alejandro; Schmidt, Susann; Högberg, Hans et al.

2018

Spallation failure of silicon nitride coatings upon dissolution in fetal bovine serum

López, Alejandro; Filho, Luimar; Cogrel, Mathilde; Engqvist, Håkan et al.

2018

Digital Volume Correlation using Quartic FEM Interpolation and Global Optimization

van Dijk, Nico P.; Wu, Dan; Persson, Cecilia; Isaksson, Per

2018

• Ladda ner fulltext (pdf) av Digital Volume Correlation using Quartic FEM Interpolation and Global Optimization

Morphology and adhesion of silicon nitride coatings upon soaking in fetal bovine serum

López, Alejandro; Filho, Luimar Correa; Cogrel, Mathilde; Engqvist, Håkan et al.

Ingår i 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization, Lisbon, March 26-29, 2018, 2018

• Ladda ner fulltext (pdf) av Morphology and adhesion of silicon nitride coatings upon soaking in fetal bovine serum

Modified PMMA for osteoporotic vertebral fracture - reason for a better suited PMMA cement for fragile bone.

Nilsson, Maria; Persson, Cecilia

2017

Heparinisation as a tool to modulate osteoclastogenesis on calcium phosphates

Díez-Escudero, Anna; Montserrat, Espanol; Di Pompo, Gemma; Torregianni, Elena et al.

2017

Nanostructured Calcium Phosphate Scaffolds Trigger Osteoinduction and Osteogenesis

Barba, Albert; Rappe, Katrin; Fontecha, P; Diez-Escudero, Anna et al.

2017

A review of the relationships between density and mechanical properties of vertebral trabecular bone

Öhman Mägi, Caroline; Holub, Ondrej; Hall, Richard M.; Persson, Cecilia

2017

Fatigue life of a brushite cement under cyclic compressive loading

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

2017

In-situ analysis of the fast setting reaction of brushite cement

Luo, Jun; Persson, Cecilia; Engqvist, Håkan; Xia, Wei

2017

Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models

Wu, Dan; Joffre, Thomas; Gallinetti, Sara; Öhman Mägi, Caroline et al.

2017

• Ladda ner fulltext (pdf) av Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models

Assessment of bone formation in CaP scaffolds – µCT method development

Lewin, Susanne; Barba, Albert; Persson, Cecilia; Franch, Jordi et al.

2017

Predicting the mechanical properties of vertebral trabecular bone - a review

Öhman Mägi, Caroline; Holub, Ondrej; Hall, Richard M; Persson, Cecilia

2017

The influence of porosity on the fatigue properties of brushite cement

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

Ingår i Biomaterials for tissue engineering models, 2016

Compressive strength increase of calcium phosphate bone cements is accompanied by a stiffness increase

Ajaxon, Ingrid; Acciaioli, Alice; Lionello, Giacomo; Ginebra, Maria-Pau et al.

2016

The effect of two fatty acids on the antibacterial properties of calcium phosphate cements

ROBO, Céline; Espanol, Montserrat; Buxadera-Palomero, Judit; Öhman-Mägi, Caroline et al.

s. 350, 2016

Deformations in trabecular bone during pull-out of screw implants

Joffre, Thomas; Isaksson, Per; Procter, Philip; Persson, Cecilia

2016

Combinatorial sputtering of Si-Fe-C-N coatings for joint implants

Skjöldebrand, Charlotte; Persson, Cecilia; Engqvist, Håkan

2016

A combined computational and experimental X-ray CT multiscale study of stable, slowly growing cracks in wood-fibre based composite materials

Joffre, Thomas; Segerholm, Kristoffer; Persson, Cecilia; Luengo Hendriks, Chris et al.

2016

Long-term degradation of brushite cements in three different liquids

Ajaxon, Ingrid; Holmberg, Anders; Öhman Mägi, Caroline; Persson, Cecilia

2016

Deformation field estimation in compressed human trabecular bone using synchrotron X-ray tomography

Joffre, Thomas; Ando, Edwardo; Dumont, Pierre; Ferguson, Stephen et al.

2016

Wear resistance of silicon nitride coatings in a hard-on-hard contact

Correa Filho, Luimar; Schmidt, Susann; Högberg, Hans; Leifer, Klaus et al.

2016

Mechanical testing in uCT and synchrotron scanners for an increased understanding of the role of bone microstructure on fracture processes and in fracture treatments

Joffre, Thomas; Procter, Philip; Brown, Chris; Isaksson, Per et al.

2015

Influences of alkali metals additives on phase transition of translucent ZrO₂/SiO₂ glass ceramic prepared by sol-gel method

Fu, Le; Andersson, Martin; Unosson, Erik; Persson, Cecilia et al.

2015

The use of bone cement to minimize interbody device subsidence

Liddle, A; Borse, V; Skrzypic, D; Timothy, J et al.

2015

In vivo response to low-modulus PMMA bone cements in a rodent model

Persson, Cecilia; Carlsson, Elin; Treerattrakoon, Kiatnida; López, Alejandro et al.

2015

Local stiffness measurements in apatite and brushite cements

Ajaxon, Ingrid; Lionello, Giacomo; Ginebra, Maria-Pau; Öhman, Caroline et al.

2015

Composites of Polyvinyl Alcohol and Nanocellulose for Contact Lens Applications

Tummala, Gopi K.; Joffre, Thomas; Persson, Cecilia; Mihranyan, Albert

Ingår i Uppsala Biomaterials Conference  2015, 2015

A non-drying porosity evaluation method for calcium phosphate cements

Ajaxon, Ingrid; Maazouz, Yassine; Ginebra, Maria-Pau; Öhman, Caroline et al.

Ingår i 26th Symposium and Annual Meeting of the International Society for Ceramics in Medicine, s. 68-68, 2014

Compressive Fatigue Properties of Acidic Calcium Phosphate Cement

Ajaxon, Ingrid; Öhman, Caroline; Persson, Cecilia

Ingår i Proceedings of 7th World Congress of Biomechanics, 2014

Calcium phosphate spheres incorporated into PMMA cement for enhanced antibacterial properties

Qin, Tao; López, Alejandro; Öhman, Caroline; Engqvist, Håkan et al.

2014

Effect of Setting Time on Drug Release from a Brushite Cement

Mestres, Gemma; Kugiejko, Karol; Karlsson Ott, Marjam; Persson, Cecilia

2014

Prediction of porosity in hydroxyapatite and brushite cements

Öhman, Caroline; Carlsson, Elin; Ginebra, Maria Pau; Persson, Cecilia et al.

2013

Porosity prediction of calcium phosphate cements

Öhman, Caroline; Carlsson, Elin; Ginebra, Maria Pau; Persson, Cecilia et al.

2013

Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses

Pettersson, Maria; Thersleff, Thomas; Jacobson, Staffan; Larsson, Sune et al.

2013

Optimization of an acidic calcium phosphate cement with enhanced radiopacity

Engstrand, Johanna; Jacob, Julie; Engqvist, Håkan; Persson, Cecilia

Ingår i The 23rd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures - GRIBOI, 2013

• Ladda ner fulltext (pdf) av Optimization of an acidic calcium phosphate cement with enhanced radiopacity

Inflammatory response to calcium phosphate cements with patterned surfaces

Mestres, Gemma; Espanol, Montse; Persson, Cecilia; Ginebra, Maria-Pau et al.

2013

Compressive fatigue properties of acrylic bone cement for vertebroplasty

Ajaxon, Ingrid; Persson, Cecilia

Ingår i The 23rd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials in Bone Augmentation Procedures, 2013

• Ladda ner fulltext (pdf) av Compressive fatigue properties of acrylic bone cement for vertebroplasty

Nano grain sized silica-zirconia glass ceramics for dental applications

Xia, Wei; Persson, Cecilia; Unosson, Erik; Andersson, Martin et al.

Ingår i 36th International Conference and Expo on Advanced Ceramics and Composites, 2012

Treatment of low back pain using injectable, load-bearing materials – a review and outlook for future strategies

Persson, Cecilia; Engqvist, Håkan

2012

Acrylic bone cement modified with oligo (trimethylene carbonate)

López, Alejandro; Hoess, Andreas; Fathali, Hoda; Ott, Marjam et al.

Ingår i 5th Annual Meeting of the Scandinavian Society for Biomaterials, Uppsala Sweden, May 8-9, 2012, 2012

Strontium halides as degradable radiopacifiers

López, Alejandro; Montazerolghaem, Maryam; Marjam, Ott; Engqvist, Håkan et al.

Ingår i The 22nd Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone, 2012

Mechanical properties of Si_xN_y- and Si_xC_yN_z-coatings for total joint replacements

Pettersson, Maria; Tkachenko, Sergey; Schmidt, Susann; Jacobson, Staffan et al.

Ingår i 15th Nordic Symposium on Tribology, NordTrib, Trondheim, Norway, June 12-15, 2012., 2012

Bioactive hybrids based on polyhedral oligomeric silsesquioxane intended as bone fillers

López, Alejandro; Engstrand, Johanna; Engqvist, Håkan; Persson, Cecilia

Ingår i 9th World Biomaterials Congress, Chengdu China, June 1-5, 2012, 2012

Low temperature oxidation and photocatalytic activity of Ti-6Al-4V

Unosson, Erik; Persson, Cecilia; Welch, Ken; Engqvist, Håkan

2012

• Ladda ner fulltext (pdf) av Low temperature oxidation and photocatalytic activity of Ti-6Al-4V

Micro scratch testing of silicon nitride and silicon carbon nitride coatings

Tkachenko, Sergey; Pettersson, Maria; Schmidt, Susann; Berlind, Torun et al.

Ingår i Scandinavian Society for Biomaterials, the 5th Annual Meeting, Uppsala, Sweden, May 8-9, 2012., 2012

Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal®V modified with linoleic acid

Lopez, Alejandro; Mestres, Gemma; Karlsson Ott, Marjam; Engqvist, Håkan et al.

2012

Translucent zirconia-silica glass ceramics for dental crowns

Xia, Wei; Persson, Cecilia; Unosson, Erik; Ajaxon, Ingrid et al.

Ingår i Proceedings of the 36th International Conference and Expo on Advanced Ceramics and Composites, 2012

Calcium phosphate sphere/PMMA composite: preparation, ion and drug release

Xia, Wei; Mujo, Martin; Engqvist, Håkan; Persson, Cecilia

Ingår i Scandinavian Society for Biomaterials (ScSB)  Annual Meeting, 2012

The effect of castor oil on spinal bone cement properties

Persson, Cecilia; López, Alejandro; Engqvist, Håkan

Ingår i The 57th Annual Meeting of the Orthopaedic Research Society, Long Beach, California, 2011

Towards Low-Modulus Bone Cements - the effect of a natural oil in PMMA

Persson, Cecilia; López, Alejandro; Hoess, Andreas; Ott, Marjam et al.

Ingår i 21st GRIBOI Congress, Boston, USA, 2011

Premixed calcium silicate cements for endodontic applications.

Persson, Cecilia; Engqvist, Håkan

Ingår i 4h annual meeting of the Scandinavian Society for Biomaterials - Biomaterials go nano, s. 25-25, 2011

The effect of castor oil on spinal bone cement properties

Persson, Cecilia; López, Alejandro; Engqvist, Håkan

2011

Towards Low-Modulus Bone Cements – The Effect of a Natural Oil in PMMA

Persson, Cecilia; López, Alejandro; Hoess, Andreas; Ott, Marjam et al.

2011

Ball-on-disc testing of SiN_x coatings for hip joint implants

Pettersson, Maria; Olofsson, Johanna; Teuscher, Nico; Jacobson, Staffan et al.

2011

Effects of a natural oil on the mechanical properties and cytotoxicity of PMMA bone cement

Hoess, Andreas; López, Alejandro; Engqvist, Håkan; Persson, Cecilia

Ingår i Annual Meeting of the Scandinavian Society for Biomaterials, s. 23, 2011

Customised bone cement for vertebroplasty

Persson, Cecilia; López, Alejandro; Unosson, Erik; Engqvist, Håkan

2010

Pre-mixed calcium silicate cement for endodontic applications

Persson, Cecilia; Engqvist, Håkan

2010

Customised Bone Cement for Vertebroplasty

Persson, Cecilia; López, Alejandro; Unosson, Erik; Engqvist, Håkan

Ingår i Interfacing biology and materials, 2010

The use of calcium carbonate cements as a drug carrier

Persson, Cecilia; Ajaxon, Ingrid; Åberg, Jonas; Mihranyan, Albert et al.

Ingår i GRIBOI 2010, 2010

Pre-mixed calcium silicate cement for endodontic applications

Persson, Cecilia; Engqvist, Håkan

Ingår i 23rd European Conference on Biomaterials, 2010

Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement

Olofsson, Johanna; Grehk, Mikael; Persson, Cecilia; Jacobson, Staffan et al.

Ingår i Asiatrib 2010, 2010

Injectable biodegradable composites for the degenerated intervertebral disc

López, Alejandro; Persson, Cecilia; Hilborn, Jöns; Engqvist, Håkan

Ingår i GRIBOI Congress, Turin, 2010, 2010

Evaluation of a radio-opaque premixed calcium phosphate cement

Åberg, Jonas; Persson, Cecilia; Hulsart Billström, Gry; Brisby, Helena et al.

Ingår i Scandinavian Society or Biomaterials Annual Meeting, 2010

Setting time and initial compressive strength of a radiopaque premixed calcium phosphate cement

Åberg, Jonas; Persson, Cecilia; Hulsart, Gry; Thomsen, Peter et al.

Ingår i GRIBOI, Turin, 2010, 2010

Microstructural features in thin walls of Mg alloy WE43 processed by powder bed fusion - laser beam (PBF-LB)

Nilsson Åhman, Hanna; D'Elia, Francesco; Mellin, Pelle; Persson, Cecilia

2023

Adhesives from Inorganic Nanoparticles and Low-Molecular-Weight Organic Compounds

Yang, Jiaojiao; Luo, Jun; Persson, Cecilia; Welch, Ken et al.

Wear performance of a new biocompatible silicon nitride for biomedical applications

Filho, Luimar; Fu, Le; Engqvist, Håkan; Xia, Wei et al.

Dissolution behavior of SiFeCN combinatorial coatings for biomedical applications

Skjöldebrand, Charlotte; Echeverri Correa, Estefania; Hulsart Billström, Gry; Persson, Cecilia

Exploring the use of selective laser melting to control the surface roughness of a Zr-based bulk metallic glass: surface characterization, ion release and osteoblastic cell response

Marattukalam, Jithin James; Larsson, Lisa; Hjörvarsson, Björgvin; Ferraz, Natalia et al.

Antiviral Properties of Oxidized Silicon Nitride Against SARS-CoV-2

Katsaros, Ioannis; Ling, Jiaxin; Donzel-Gargand, Olivier; Akusjärvi, Göran et al.

Contact inactivation of human adenovirus type 5 by silicon nitride ceramics

Katsaros, Ioannis; Carlsson, Anette; Persson, Cecilia; Akusjärvi, Göran et al.

Impact of particles derived from spinal implant materials on glial survival and activation

Echeverri Correa, Estefania; O'Callaghan, Paul; Ferraz, Natalia; Hulsart Billström, Gry et al.

Osteogenic potential of a calcium phosphate-PLLA composite structure

Echeverri Correa, Estefanía; Grzeszczak, Ana; Shtender, Vitalii; Åberg, Jonas et al.

The importance of hatch distance in PBF-LB processing of WE43 for balancing corrosion, cytotoxicity, and mechanical properties

Nilsson-Åhman, Hanna; de Berardinis, Niccoló; Larsson, Lisa; Rothkranz, Leon et al.

Fretting behaviour of silicon nitride against biomedical alloys for joint replacements

Pettersson, Maria; Oladokun, Abimbola; Bryant, Michael; Engqvist, Håkan et al.

Compressive fatigue properties of a high-strength, degradable calcium phosphate bone cement – influence of porosity and environment

Ajaxon, Ingrid; Holmberg, Anders; Öhman-Mägi, Caroline; Persson, Cecilia

The addition of poly(vinyl alcohol) fibres to apatitic calcium phosphate cement can improve its toughness

Luo, Jun; Faivre, Julien; Engqvist, Håkan; Persson, Cecilia

A ready-to-use acidic calcium phosphate cement

Luo, Jun; Engqvist, Håkan; Persson, Cecilia

On the relationship between process parameters and residual stress in large WE43 builds produced by PBF-LB

Larsson, Lisa; Nilsson Åhman, Hanna; D'Elia, Francesco; Maimaitiyili, Tuerdi et al.

The role of laser scan rotation in additive manufacturing of Mg-RE alloy WE43

Larsson, Lisa; Luzin, Vladimir; Salvemini, Flilomena; Shtender, Vitalii et al.

Laser hatch distance can tune corrosion behaviour and mechanical properties while maintaining in vitro biocompatibility of additively manufactured Mg alloy WE43

Nilsson Åhman, Hanna; de Berardinis, Niccoló; Larsson, Lisa; Rothkranz, Leon et al.

Polyamide 11-based Composites with Ultra-Low Graphene Content for Electrostatic Dissipation and Enhanced Recyclability in Polymer PBF-LB

Spanou, Andrea; Sandblad, Fanny; Hadawale, Snehal; Åberg, Malte et al.

Laser hatch distance can tune corrosion behavior and mechanical properties while maintaining in vitro biocompatibility of additively manufactured Mg WE43 alloy

Nilsson Åhman, Hanna; De Berardinis, Niccolò; Larsson, Lisa; Leon, Rothkranz et al.

Microstructural Evolution and Sliding Wear Behavior of Additively Manufactured Ti6Al4V–316L Alloy under Various Heat Treatments

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban

Leveraging Powder Bed Fusion with Laser Beam to Achieve Corrosion Resistant Mg-Zn-Ca Bulk Metallic Glass

Cavaliere, Giulio; Eirefors, Johanna; Hulsart Billström, Gry; Bryant, Michael et al.

Mitigating crack formation in Mg–Zn–Ca bulk metallic glass during powder bed fusion with laser beam

Cavaliere, Giulio; Shtender, Vitalii; D'Elia, Francesco; Persson, Cecilia

Rapid solidification and α-Mg/β-Li morphology evolution in laser surface–remelted dual-phase Mg–6 wt.% Li alloy

Leviandhika, Vidhiaza; Kotiadis, Stephanie; Donzel-Gargand, Olivier; Persson, Cecilia et al.

In-Situ Surface Modification of Ti-6Al-4V via Shielding Gas Switching during PBF-LB: Effects on Microstructure and Wear Behavior.

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban

Nitride Formation During Post-Processing for Enhanced Wear Resistance of PBF-LB Ti-6Al-4V via Hot Isostatic Pressing in Nitrogen Atmosphere

Leviandhika, Vidhiaza; D'Elia, Francesco; Persson, Cecilia; Wiklund, Urban

Towards application-ready resorbable cranial implants: tailoring mechanical properties and dimensional stability of additively manufactured PLLA through post-processing

Grzeszczak, Ana; Shtender, Vitalii; Persson, Cecilia