Henrik Sjöstrand
Universitetslektor vid Institutionen för fysik och astronomi; Tillämpad kärnfysik
- Telefon:
- 018-471 33 29, 070-167 91 32
- Mobiltelefon:
- 073-313 04 66
- E-post:
- henrik.sjostrand@physics.uu.se
- Besöksadress:
- Ångströmlaboratoriet, Lägerhyddsvägen 1
- Postadress:
- Box 516
751 20 UPPSALA
Mer information visas för dig som medarbetare om du loggar in.
Kort presentation
Programansvarig för Energisystemprogrammet. (www.energisystem.nu)
Forskar inom kärndata och dess tillämpningar så som kärnkraft och fusion.
Undervisar inom kärkraft och Monte Carlo metoder.
Nyckelord
- nuclear data
- nuclear engineering
- nuclear physics
- sustainable development
- uncertainty quantification
Publikationer
Urval av publikationer
- A first sketch (2019)
- Monte Carlo integral adjustment of nuclear data libraries (2019)
- Assessment of Novel Techniques for Nuclear Data Evaluation (2018)
- Treating model defects by fitting smoothly varying model parameters (2018)
- Efficient use of Monte Carlo (2018)
- Fitting a defect non-linear model with or without prior, distinguishing nuclear reaction products as an example (2017)
- Propagation of nuclear data uncertainties for fusion power measurements (2017)
- On the use of integral experiments for uncertainty reduction of reactor macroscopic parameters within the TMC methodology (2016)
- Nuclear Reaction Data and Uncertainties for Radiation Damage (2016)
- Propagation Of Nuclear Data Uncertainties For Fusion Power Measurements (2016)
- Uncertainty Propagation with Fast Monte Carlo Techniques (2014)
- Total Monte Carlo evaluation for dose calculations (2014)
- Propagation of nuclear data uncertainties for ELECTRA burn-up calculations (2014)
Senaste publikationer
- Prediction of decay heat using non-destructive assays (2025)
- Deep heterogeneous joint architecture (2025)
- Estimating angular momenta of fission fragments from isomeric yield ratios using TALYS (2024)
- Random files for fission fragment evaporation in TALYS (2024)
- Overview of T and D-T results in JET with ITER-like wall (2024)
Alla publikationer
Artiklar
- Prediction of decay heat using non-destructive assays (2025)
- Deep heterogeneous joint architecture (2025)
- Estimating angular momenta of fission fragments from isomeric yield ratios using TALYS (2024)
- Random files for fission fragment evaporation in TALYS (2024)
- Overview of T and D-T results in JET with ITER-like wall (2024)
- Model inadequacy in fuel performance code calibration (2024)
- Prediction of Decay Heat from PWR Spent Nuclear Fuel Using Fuel Parameters (2024)
- Applying machine learning methods for the analysis of two-dimensional mass spectra (2023)
- Templates of Expected Measurement Uncertainties for Neutron-Induced Capture and Charged-Particle Production Cross Section Observables (2023)
- Templates of expected measurement uncertainties for total neutron cross-section observables (2023)
- Templates of expected measurement uncertainties (2023)
- Spent Nuclear Fuel passive gamma analysis and reproducibility (2023)
- Overview of JET results for optimising ITER operation (2022)
- Fuel ion ratio determination using the 14 MeV Tandem neutron spectrometer for JET DTE1 campaign discharges (2022)
- Treating model inadequacy in fuel performance model calibration by parameter uncertainty inflation (2022)
- Conception and Software Implementation of a Nuclear Data Evaluation Pipeline (2021)
- Development and application of marginal likelihood optimization for integral parameter adjustment (2021)
- Phonon parameters fitting for the simulated Thermal-Neutron scattering cross section of H in ZrHx using Unified Monte Carlo method (2021)
- Bayesian updating for data adjustments and multi-level uncertainty propagation within Total Monte Carlo (2020)
- Nuclear Data Uncertainty Propagation in Complex Fusion Geometries (2020)
- The joint evaluated fission and fusion nuclear data library, JEFF-3.3 (2020)
- Data assimilation of post-irradiation examination data for fission yields from GEF (2020)
- Gyrokinetic simulations of toroidal Alfven eigenmodes excited by energetic ions and external antennas on the Joint European Torus (2019)
- Impact of ICRF on the scrape-off layer and on plasma wall interactions (2019)
- Role of fast ion pressure in the isotope effect in JET L-mode plasmas (2019)
- Improved ERO modelling of beryllium erosion at ITER upper first wall panel using JET-ILW and PISCES-B experience (2019)
- Erosion, screening, and migration of tungsten in the JET divertor (2019)
- Recurrence Plots for Dynamic Analysis of Type-I ELMs at JET With a Carbon Wall (2019)
- Runaway electron beam control (2019)
- Deep neural networks for plasma tomography with applications to JET and COMPASS (2019)
- EDGE2D-EIRENE simulations of the influence of isotope effects and anomalous transport coefficients on near scrape-off layer radial electric field (2019)
- Material migration and fuel retention studies during the JET carbon divertor campaigns (2019)
- Dynamic modelling of local fuel inventory and desorption in the whole tokamak vacuum vessel for auto-consistent plasma-wall interaction simulations (2019)
- Impact of fast ions on density peaking in JET (2019)
- Interpretative and predictive modelling of Joint European Torus collisionality scans (2019)
- Full-orbit and drift calculations of fusion product losses due to explosive fishbones on JET (2019)
- Role of the pedestal position on the pedestal performance in AUG, JET-ILW and TCV and implications for ITER (2019)
- First principles and integrated modelling achievements towards trustful fusion power predictions for JET and ITER (2019)
- A new mechanism for increasing density peaking in tokamaks (2019)
- Direct gyrokinetic comparison of pedestal transport in JET with carbon and ITER-like walls (2019)
- Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET (2019)
- An assessment of nitrogen concentrations from spectroscopic measurements in the JET and ASDEX upgrade divertor (2019)
- Application of Gaussian process regression to plasma turbulent transport model validation via integrated modelling (2019)
- The software and hardware architecture of the real-time protection of in-vessel components in JET-ILW (2019)
- Beryllium melting and erosion on the upper dump plates in JET during three ITER-like wall campaigns (2019)
- Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall (2019)
- Modelling of tungsten erosion and deposition in the divertor of JET-ILW in comparison to experimental findings (2019)
- Gyrokinetic analysis and simulation of pedestals to identify the culprits for energy losses using 'fingerprints' (2019)
- RF sheath modeling of experimentally observed plasma surface interactions with the JET ITER-Like Antenna (2019)
- Influence of nuclear data parameters on integral experiment assimilation using Cook's distance (2019)
- Investigation of deuterium trapping and release in the JET divertor during the third ILW campaign using TDS (2019)
- Investigation of deuterium trapping and release in the JET ITER-like wall divertor using TDS and TMAP (2019)
- Isotope identity experiments in JET-ILW with H and D L-mode plasmas (2019)
- The effect of beryllium oxide on retention in JET ITER-like wall tiles (2019)
- Current Research into Applications of Tomography for Fusion Diagnostics (2019)
- First mirror test in JET for ITER (2019)
- Adaptive learning for disruption prediction in non-stationary conditions (2019)
- Energetic ion losses 'channeling' mechanism and strategy for mitigation (2019)
- Modification of the Alfven wave spectrum by pellet injection (2019)
- Approximate analytic expressions using Stokes model for tokamak polarimetry and their range of validity (2019)
- Comparison of the structure of the plasma-facing surface and tritium accumulation in beryllium tiles from JET ILW campaigns 2011-2012 and 2013-2014 (2019)
- Novel method for determination of tritium depth profiles in metallic samples (2019)
- A wall-aligned grid generator for non-linear simulations of MHD instabilities in tokamak plasmas (2019)
- A machine learning approach based on generative topographic mapping for disruption prevention and avoidance at JET (2019)
- Beryllium global erosion and deposition at JET-ILW simulated with ERO2.0 (2019)
- Self-consistent pedestal prediction for JET-ILW in preparation of the DT campaign (2019)
- A first sketch (2019)
- Geodesic acoustic mode evolution in L-mode approaching the L-H transition on JET (2019)
- Monte Carlo integral adjustment of nuclear data libraries (2019)
- Neutron-induced damage simulations (2019)
- COREDIV numerical simulation of high neutron rate JET-ILW DD pulses in view of extension to JET-ILW DT experiments (2019)
- Control of the hydrogen:deuterium isotope mixture using pellets in JET (2019)
- Ion cyclotron resonance heating scenarios for DEMO (2019)
- Radial variation of heat transport in L-mode JET discharges (2019)
- Synthetic diagnostic for the JET scintillator probe lost alpha measurements (2019)
- Long-lived coupled peeling ballooning modes preceding ELMs on JET (2019)
- Simulation of neutron emission in neutral beam injection heated plasmas with the real-time code RABBIT (2019)
- Deposition of impurity metals during campaigns with the JET ITER-like Wall (2019)
- A power-balance model of the density limit in fusion plasmas (2019)
- Dependence of the turbulent particle flux on hydrogen isotopes induced by collisionality (2018)
- Equilibrium reconstruction in an iron core tokamak using a deterministic magnetisation model (2018)
- Thermal desorption spectrometry of beryllium plasma facing tiles exposed in the JET tokamak (2018)
- OVERVIEW OF NEUTRON MEASUREMENTS IN JET FUSION DEVICE (2018)
- 14 MeV calibration of JET neutron detectors-phase 1 (2018)
- Effects of nitrogen seeding on core ion thermal transport in JET ILW L-mode plasmas (2018)
- Light impurity transport in JET ILW L-mode plasmas (2018)
- Impact of electron-scale turbulence and multi-scale interactions in the JET tokamak (2018)
- Fast H isotope and impurity mixing in ion-temperature-gradient turbulence (2018)
- Pedestal evolution physics in low triangularity JET tokamak discharges with ITER-like wall (2018)
- First principle integrated modeling of multi-channel transport including Tungsten in JET (2018)
- High Z neoclassical transport (2018)
- Alpha heating, isotopic mass, and fast ion effects in deuterium-tritium experiments (2018)
- Divertor currents optimization procedure for JET-ILW high flux expansion experiments (2018)
- Nonlinear dynamic analysis of D-alpha signals for type I edge localized modes characterization on JET with a carbon wall (2018)
- Assessment of the strength of kinetic effects of parallel electron transport in the SOL and divertor of JET high radiative H-mode plasmas using EDGE2D-EIRENE and KIPP codes (2018)
- Testing of tritium breeder blanket activation foil spectrometer during JET operations (2018)
- Maximum likelihood bolometric tomography for the determination of the uncertainties in the radiation emission on JET TOKAMAK (2018)
- Modelling of the neutron production in a mixed beam DT neutron generator (2018)
- Development of a new compact gamma-ray spectrometer optimised for runaway electron measurements (2018)
- Synthetic spectra of BeH, BeD and BeT for emission modeling in JET plasmas (2018)
- Multi-machine analysis of termination scenarios with comparison to simulations of controlled shutdown of ITER discharges (2018)
- Non-Maxwellian fast particle effects in gyrokinetic GENE simulations (2018)
- Review of recent experimental and modeling advances in the understanding of lower hybrid current drive in ITER-relevant regimes (2018)
- Correlation of the tokamak H-mode density limit with ballooning stability at the separatrix (2018)
- Equilibrium reconstruction at JET using Stokes model for polarimetry (2018)
- Real-time-capable prediction of temperature and density profiles in a tokamak using RAPTOR and a first-principle-based transport model (2018)
- Full-Pulse Tomographic Reconstruction with Deep Neural Networks (2018)
- JET diagnostic enhancements testing and commissioning in preparation for DT scientific campaigns (2018)
- Shutdown dose rate measurements after the 2016 Deuterium-Deuterium campaign at JET (2018)
- On the universality of power laws for tokamak plasma predictions (2018)
- Heat flux analysis of Type-I ELM impact on a sloped, protruding surface in the JET bulk tungsten divertor (2018)
- Characterisation of neutron generators and monitoring detectors for the in-vessel calibration of JET (2018)
- First observation of the depolarization of Thomson scattering radiation by a fusion plasma (2018)
- Experimental validation of an analytical kinetic model for edge-localized modes in JET-ITER-like wall (2018)
- Instrumentation for the upgrade to the JET core charge-exchange spectrometers (2018)
- Treating model defects by fitting smoothly varying model parameters (2018)
- Analysis of plasma termination in the JET hybrid scenario (2018)
- Inter-ELM evolution of the edge current density in JET-ILW type I ELMy H-mode plasmas (2018)
- 3D non-linear MHD simulation of the MHD response and density increase as a result of shattered pellet injection (2018)
- Real-time protection of the JET ITER-like wall based on near infrared imaging diagnostic systems (2018)
- An improved model for the accurate calculation of parallel heat fluxes at the JET bulk tungsten outer divertor (2018)
- High fusion performance at high T-i/T-e in JET-ILW baseline plasmas with high NBI heating power and low gas puffing (2018)
- Escaping alpha-particle monitor for burning plasmas (2018)
- Analysis of possible improvement of the plasma performance in JET due to the inward spatial channelling of fast-ion energy (2018)
- Application of the VUV and the soft x-ray systems on JET for the study of intrinsic impurity behavior in neon seeded hybrid discharges (2018)
- Preparation for commissioning of materials detritiation facility at Culham Science Centre (2018)
- Identification of BeO and BeOxDy in melted zones of the JET Be limiter tiles (2018)
- W transport and accumulation control in the termination phase of JET H-mode discharges and implications for ITER (2018)
- ERO modeling and sensitivity analysis of locally enhanced beryllium erosion by magnetically connected antennas (2018)
- On the potential of ruled-based machine learning for disruption prediction on JET (2018)
- Isotope effects on L-H threshold and confinement in tokamak plasmas (2018)
- Observation of enhanced ion particle transport in mixed H/D isotope plasmas on JET (2018)
- Observations and modelling of ion cyclotron emission observed in JET plasmas using a sub-harmonic arc detection system during ion cyclotron resonance heating (2018)
- ICRH antenna &ITS&IT-matrix measurements and plasma coupling characterisation at JET (2018)
- Neutral pathways and heat flux widths in vertical- and horizontal-target EDGE2D-EIRENE simulations of JET (2018)
- Adaptive predictors based on probabilistic SVM for real time disruption mitigation on JET (2018)
- On the Use of Transfer Entropy to Investigate the Time Horizon of Causal Influences between Signals (2018)
- A multi-machine scaling of halo current rotation (2018)
- TAE stability calculations compared to TAE antenna results in JET (2018)
- TLD calibration for neutron fluence measurements at JET fusion facility (2018)
- Tritium retention characteristics in dust particles in JET with ITER-like wall (2018)
- Correlation of surface chemical states with hydrogen isotope retention in divertor tiles of JET with ITER-Like Wall (2018)
- A First Analysis of JET Plasma Profile-Based Indicators for Disruption Prediction and Avoidance (2018)
- Comparison of runaway electron generation parameters in small, medium-sized and large tokamaks-A survey of experiments in COMPASS, TCV, ASDEX-Upgrade and JET (2018)
- Sub-millisecond electron density profile measurement at the JET tokamak with the fast lithium beam emission spectroscopy system (2018)
- The upgraded JET gamma-ray cameras based on high resolution/high count rate compact spectrometers (2018)
- Application of the Denovo Discrete Ordinates Radiation Transport Code to Large-Scale Fusion Neutronics (2018)
- Dust generation in tokamaks (2018)
- High-resolution tungsten spectroscopy relevant to the diagnostic of high-temperature tokamak plasmas (2018)
- Integrated modelling of H-mode pedestal and confinement in JET-ILW (2018)
- Control and data acquisition software upgrade for JET gamma-ray diagnostics (2018)
- Determination of 2D poloidal maps of the intrinsic W density for transport studies in JET-ILW (2018)
- MHD spectroscopy of JET plasmas with pellets via Alfven eigenmodes (2018)
- Scaling of the geodesic acoustic mode amplitude on JET (2018)
- Assessment of the baseline scenario at q(95) similar to 3 for ITER (2018)
- Versatile fusion source integrator AFSI for fast ion and neutron studies in fusion devices (2018)
- Efficient use of Monte Carlo (2018)
- Test particles dynamics in the JOREK 3D non-linear MHD code and application to electron transport in a disruption simulation (2018)
- ACTIVATION INVENTORIES AFTER EXPOSURE TO DD/DT NEUTRONS IN SAFETY ANALYSIS OF NUCLEAR FUSION INSTALLATIONS (2018)
- Effect of the relative shift between the electron density and temperature pedestal position on the pedestal stability in JET-ILW and comparison with JET-C (2018)
- Plasma-wall interaction on the divertor tiles of JET ITER-like wall from the viewpoint of micro/nanoscopic observations (2018)
- Real-time implementation with FPGA-based DAQ system of a probabilistic disruption predictor from scratch (2018)
- Shutdown dose rate neutronics experiment during high performances DD operations at JET (2018)
- On the role of finite grid extent in SOLPS-ITER edge plasma simulations for JET H-mode discharges with metallic wall (2018)
- First principles of modelling the stabilization of microturbulence by fast ions (2018)
- Investigation into the formation of the scrape-off layer density shoulder in JET ITER-like wall L-mode and H-mode plasmas (2018)
- Modelling of JET DT experiments in ILW configurations (2018)
- Assessment of SOLPS5.0 divertor solutions with drifts and currents against L-mode experiments in ASDEX Upgrade and JET (2017)
- Numerical analysis of ELM stability with rotation and ion diamagnetic drift effects in JET (2017)
- Gyrokinetic study of turbulent convection of heavy impurities in tokamak plasmas at comparable ion and electron heat fluxes (2017)
- Towards self-consistent plasma modelisation in presence of neoclassical tearing mode and sawteeth (2017)
- Technical preparations for the in-vessel 14 MeV neutron calibration at JET (2017)
- Power exhaust by SOL and pedestal radiation at ASDEX Upgrade and JET (2017)
- Hybrid cancellation of ripple disturbances arising in AC/DC converters (2017)
- Progress in reducing ICRF-specific impurity release in ASDEX upgrade and JET (2017)
- Development of MPPC-based detectors for high count rate DT campaigns at JET (2017)
- Self-consistent coupling of DSMC method and SOLPS code for modeling tokamak particle exhaust (2017)
- An analytical expression for ion velocities at the wall including the sheath electric field and surface biasing for erosion modeling at JET ILW (2017)
- Intra-ELM tungsten sputtering in JET ITER-like wall (2017)
- Recent progress towards a quantitative description of filamentary SOL transport (2017)
- Assessment of erosion, deposition and fuel retention in the JET-ILW divertor from ion beam analysis data (2017)
- Time-resolved deposition in the remote region of the JET-ILW divertor (2017)
- Possible influence of near SOL plasma on the H-mode power threshold (2017)
- The global build-up to intrinsic ELM bursts and comparison with pellet triggered ELMs seen in JET (2017)
- A 3D electromagnetic model of the iron core in JET (2017)
- Tractable flux-driven temperature, density, and rotation profile evolution with the quasilinear gyrokinetic transport model QuaLiKiz (2017)
- Transient induced tungsten melting at the Joint European Torus (JET) (2017)
- Thermal analysis of protruding surfaces in the JET divertor (2017)
- Upgrade of the tangential gamma-ray spectrometer beam-line for JET DT experiments (2017)
- Evaluation of the plasma hydrogen isotope content by residual gas analysis at JET and AUG (2017)
- Commissioning and first results of the reinstated JET ICRF ILA (2017)
- ELM divertor peak energy fluence scaling to ITER with data from JET, MAST and ASDEX upgrade (2017)
- Dynamics and stability of divertor detachment in H-mode plasmas on JET (2017)
- The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign (2017)
- Studies of dust from JET with the ITER-Like Wall (2017)
- Fine metal dust particles on the wall probes from JET-ILW (2017)
- Dimensionless scalings of confinement, heat transport and pedestal stability in JET-ILW and comparison with JET-C (2017)
- Global and pedestal confinement and pedestal structure in dimensionless collisionality scans of low-triangularity H-mode plasmas in JET-ILW (2017)
- Challenges in the extrapolation from DD to DT plasmas (2017)
- Plasma impact on diagnostic mirrors in JET (2017)
- Ion cyclotron resonance heating for tungsten control in various JET H-mode scenarios (2017)
- Main chamber wall plasma loads in JET-ITER-like wall at high radiated fraction (2017)
- Real-time control of divertor detachment in H-mode with impurity seeding using Langmuir probe feedback in JET-ITER-like wall (2017)
- Tritium analysis of divertor tiles used in JET ITER-like wall campaigns by means of beta-ray induced x-ray spectrometry (2017)
- Long-term fuel retention and release in JET ITER-Like Wall at ITER-relevant baking temperatures (2017)
- Experience on divertor fuel retention after two ITER-Like Wall campaigns (2017)
- Fitting a defect non-linear model with or without prior, distinguishing nuclear reaction products as an example (2017)
- Combining Total Monte Carlo and Unified Monte Carlo (2017)
- Uncertainty driven nuclear data evaluation including thermal (n,alpha) applied to Ni-59 (2017)
- Comparative H-mode density limit studies in JET and AUG (2017)
- The effect of the isotope on the H-mode density limit (2017)
- The near infrared imaging system for the real-time protection of the JET ITER-like wall (2017)
- Activation measurements in support of the 14 MeV neutron calibration of JET neutron monitors (2017)
- Impact of divertor geometry on H-mode confinement in the JET metallic wall (2017)
- Statistical validation of predictive TRANSP simulations of baseline discharges in preparation for extrapolation to JET D-T (2017)
- Modelling of transitions between L- and H-mode in JET high plasma current plasmas and application to ITER scenarios including tungsten behaviour (2017)
- Beryllium film deposition in cavity samples in remote areas of the JET divertor during the 2011-2012 ITER-like wall campaign (2017)
- Erosion at the inner wall of JET during the discharge campaign 2013-2014 (2017)
- Bayesian electron density inference from JET lithium beam emission spectra using Gaussian processes (2017)
- CeBr3-based detector for gamma-ray spectrometer upgrade at JET (2017)
- Surface composition and structure of divertor tiles following the JET tokamak operation with the ITER-like wall (2017)
- Deuterium retention in the divertor tiles of JET ITER-Like wall (2017)
- Impact of toroidal and poloidal mode spectra on the control of non-axisymmetric fields in tokamaks (2017)
- Real time control developments at JET in preparation for deuterium-tritium operation (2017)
- Sawtooth pacing with on-axis ICRH modulation in JET-ILW (2017)
- Overview of the JET results in support to ITER (2017)
- Studies of the pedestal structure and inter-ELM pedestal evolution in JET with the ITER-like wall (2017)
- Analyses of microstructure, composition and retention of hydrogen isotopes in divertor tiles of JET with the ITER-like wall (2017)
- Deep learning for plasma tomography using the bolometer system at JET (2017)
- Energy balance in JET (2017)
- Dynamic power balance analysis in JET (2017)
- Erosion and deposition in the JET divertor during the second ITER-like wall campaign (2017)
- Investigation and plasma cleaning of first mirrors coated with relevant ITER contaminants (2017)
- Determining the prediction limits of models and classifiers with applications for disruption prediction in JET (2017)
- On efficiency and interpretation of sawteeth pacing with on-axis ICRH modulation in JET (2017)
- Detection of Causal Relations in Time Series Affected by Noise in Tokamaks Using Geodesic Distance on Gaussian Manifolds (2017)
- Progress in understanding disruptions triggered by massive gas injection via 3D non-linear MHD modelling with JOREK (2017)
- On the mechanisms governing gas penetration into a tokamak plasma during a massive gas injection (2017)
- The effect of lower hybrid waves on JET plasma rotation (2017)
- Axisymmetric global Alfven eigenmodes within the ellipticity-induced frequency gap in the Joint European Torus (2017)
- Status of ITER material activation experiments at JET (2017)
- Structure, tritium depth profile and desorption from 'plasma-facing' beryllium materials of ITER-Like-Wall at JET (2017)
- Recent progress in the quantitative validation of JOREK simulations of ELMs in JET (2017)
- A tool to support the construction of reliable disruption databases (2017)
- Expanding the role of impurity spectroscopy for investigating the physics of high-Z dissipative divertors (2017)
- Characterization of a compact LaBr3(Ce) detector with Silicon photomultipliers at high 14 MeV neutron fluxes (2017)
- Hardware architecture of the data acquisition and processing system for the JET Neutron Camera Upgrade (NCU) project (2017)
- Nuclear Data Uncertainties for Typical LWR Fuel Assemblies and a Simple Reactor Core (2017)
- First ERO2.0 modeling of Be erosion and non-local transport in JET ITER-like wall (2017)
- Metallic mirrors for plasma diagnosis in current and future reactors (2017)
- Fuel inventory and deposition in castellated structures in JET-ILW (2017)
- The emissivity of W coatings deposited on carbon materials for fusion applications (2017)
- Quartz micro-balance results of pulse-resolved erosion/deposition in the JET-ILW divertor (2017)
- Correlation analysis for energy losses, waiting times and durations of type I edge-localized modes in the Joint European Torus (2017)
- Classification of ELM types in Joint European Torus based on global plasma parameters using discriminant analysis (2017)
- Mitigation of divertor heat loads by strike point sweeping in high power JET discharges (2017)
- Synthetic neutron camera and spectrometer in JET based on AFSI- ASCOT simulations (2017)
- Axisymmetric oscillations at L-H transitions in JET (2017)
- Analysis of activation and damage of ITER material samples expected from DD/DT campaign at JET (2017)
- Comparison of JET AVDE disruption data with M3D simulations and implications for ITER (2017)
- Gyrokinetic simulations of particle transport in pellet fuelled JET discharges (2017)
- High power neon seeded JET discharges (2017)
- Simulation of JET ITER-Like Wall pulses at high neon seeding rate (2017)
- Micro-/nano-characterization of the surface structures on the divertor tiles from JET ITER-like wall (2017)
- Be ITER-like wall at the JET tokamak under plasma (2017)
- The isotope effect on divertor conditions and neutral pumping in horizontal divertor configurations in JET-ILW Ohmic plasmas (2017)
- Synthetic NPA diagnostic for energetic particles in JET plasmas (2017)
- Simulation of neutral gas flow in the JET sub-divertor (2017)
- ITER oriented neutronics benchmark experiments on neutron streaming and shutdown dose rate at JET (2017)
- EDGE2D-EIRENE simulations of the impact of poloidal flux expansion on the radiative divertor performance in JET (2017)
- Overview of the JET ITER-like wall divertor (2017)
- Overview of fuel inventory in JET with the ITER-like wall (2017)
- Impurity re-distribution in the corner regions of the JET divertor (2017)
- Plasma edge and plasma-wall interaction modelling (2017)
- Impact of the JET ITER-like wall on H-mode plasma fueling (2017)
- 3D simulations of gas puff effects on edge plasma and ICRF coupling in JET (2017)
- Selecting benchmarks for reactor simulations (2016)
- On the use of integral experiments for uncertainty reduction of reactor macroscopic parameters within the TMC methodology (2016)
- Deposition in the inner and outer corners of the JET divertor with carbon wall and metallic ITER-like wall (2016)
- Ion temperature and toroidal rotation in JET's low torque plasmas (2016)
- Improved ERO modelling for spectroscopy of physically and chemically assisted eroded beryllium from the JET-ILW (2016)
- An Analytical Expression for the Electric Field and Particle Tracing in Modelling of Be Erosion Experiments at the JET ITER-like Wall (2016)
- Core turbulent transport in tokamak plasmas (2016)
- JET Tokamak, preparation of a safety case for tritium operations (2016)
- Benchmarking the GENE and GYRO codes through the relative roles of electromagnetic and E x B stabilization in JET high-performance discharges (2016)
- Characterisation of the deuterium recycling at the W divertor target plates in JET during steady-state plasma conditions and ELMs (2016)
- Core fusion power gain and alpha heating in JET, TFTR, and ITER (2016)
- Diagnostic application of magnetic islands rotation in JET (2016)
- Advances in understanding and utilising ELM control in JET (2016)
- Plasma turbulence measured with fast frequency swept reflectometry in JET H-mode plasmas (2016)
- Classification of JET Neutron and Gamma Emissivity Profiles (2016)
- Evaluation of reconstruction errors and identification of artefacts for JET gamma and neutron tomography (2016)
- Understanding the physics of ELM pacing via vertical kicks in JET in view of ITER (2016)
- Scaling of the MHD perturbation amplitude required to trigger a disruption and predictions for ITER (2016)
- In situ wavelength calibration of the edge CXS spectrometers on JET (2016)
- Scaling of the frequencies of the type one edge localized modes and their effect on the tungsten source in JET ITER-like wall (2016)
- Gyrokinetic study of turbulence suppression in a JET-ILW power scan (2016)
- Risk Mitigation for ITER by a Prolonged and Joint International Operation of JET (2016)
- JET diagnostic enhancements in preparation for DT operations (2016)
- Characteristics of pre-ELM structures during ELM control experiment on JET with n=2 magnetic perturbations (2016)
- Advanced design of the Mechanical Tritium Pumping System for JET DTE2 (2016)
- Thermo-mechanical properties of W/Mo markers coatings deposited on bulk W (2016)
- Experimental estimation of tungsten impurity sputtering due to Type I ELMs in JET-ITER-like wall using pedestal electron cyclotron emission and target Langmuir probe measurements (2016)
- Tritium distributions on tungsten and carbon tiles used in the JET divertor (2016)
- Long-term fuel retention in JET ITER-like wall (2016)
- Sampling of systematic errors to estimate likelihood weights in nuclear data uncertainty propagation (2016)
- ITER-like antenna capacitors voltage probes (2016)
- The role of MHD in causing impurity peaking in JET hybrid plasmas (2016)
- Stationary Zonal Flows during the Formation of the Edge Transport Barrier in the JET Tokamak (2016)
- Multi-machine scaling of the main SOL parallel heat flux width in tokamak limiter plasmas (2016)
- JET experiments with tritium and deuterium-tritium mixtures (2016)
- COREDIV and SOLPS Numerical Simulations of the Nitrogen Seeded JET ILW L-mode Discharges (2016)
- Impact of divertor geometry on radiative divertor performance in JET H-mode plasmas (2016)
- Numerical calculations of non-inductive current driven by microwaves in JET (2016)
- Extending helium partial pressure measurement technology to JET DTE2 and ITER (2016)
- Bayesian modelling of the emission spectrum of the Joint European Torus Lithium Beam Emission Spectroscopy system (2016)
- Real-time control of ELM and sawtooth frequencies (2016)
- Edge profile analysis of Joint European Torus (JET) Thomson scattering data (2016)
- Deuterium trapping and release in JET ITER-like wall divertor tiles (2016)
- An FPGA-based bolometer for the MAST-U Super-X divertor (2016)
- Melt damage to the JET ITER-like Wall and divertor (2016)
- Erosion and deposition in the JET divertor during the first ILW campaign (2016)
- Simulating the nitrogen migration in Be/W tokamaks with WallDYN (2016)
- How to assess the efficiency of synchronization experiments in tokamaks (2016)
- Application of transfer entropy to causality detection and synchronization experiments in tokamaks (2016)
- First neutron spectroscopy measurements with a pixelated diamond detector at JET (2016)
- Study of the triton-burnup process in different JET scenarios using neutron monitor based on CVD diamond (2016)
- Gamma-ray spectroscopy at MHz counting rates with a compact LaBr3 detector and silicon photomultipliers for fusion plasma applications (2016)
- A generalized Abel inversion method for gamma-ray imaging of thermonuclear plasmas (2016)
- Plasma confinement at JET (2016)
- Nitrogen retention mechanisms in tokamaks with beryllium and tungsten plasma-facing surfaces (2016)
- Non-linear MHD simulations of ELMs in JET and quantitative comparisons to experiments (2016)
- Raman microscopy investigation of beryllium materials (2016)
- The non-thermal origin of the tokamak low-density stability limit (2016)
- On determining the prediction limits of mathematical models for time series (2016)
- Characterization of a diamond detector to be used as neutron yield monitor during the in-vessel calibration of JET neutron detectors in preparation of the DT experiment (2016)
- Global optimization driven by genetic algorithms for disruption predictors based on APODIS architecture (2016)
- Response function of single crystal synthetic diamond detectors to 1-4 MeV neutrons for spectroscopy of D plasmas (2016)
- MHD marking using the MSE polarimeter optics in ILW JET plasmas (2016)
- JET experience on managing radioactive waste and implications for ITER (2016)
- Performance of the prototype LaBr3 spectrometer developed for the JET gamma-ray camera upgrade (2016)
- Asymmetric toroidal eddy currents (ATEC) to explain sideways forces at JET (2016)
- The role and application of ion beam analysis for studies of plasma-facing components in controlled fusion devices (2016)
- Investigation on the erosion/deposition processes in the ITER-like wall divertor at JET using glow discharge optical emission spectrometry technique (2016)
- Fast-ion energy resolution by one-step reaction gamma-ray spectrometry (2016)
- A classification scheme for edge-localized modes based on their probability distributions (2016)
- Experimental investigation of geodesic acoustic modes on JET using Doppler backscattering (2016)
- Comparative gyrokinetic analysis of JET baseline H-mode core plasmas with carbon wall and ITER-like wall (2016)
- Sparse representation of signals (2016)
- X-ray micro-laminography for the ex situ analysis of W-CFC samples retrieved from JET ITER-like wall (2016)
- Comparison of dust transport modelling codes in a tokamak plasma (2016)
- Neutronics experiments and analyses in preparation of DT operations at JET (2016)
- Experience of handling beryllium, tritium and activated components from JET ITER like wall (2016)
- Effect of PFC Recycling Conditions on JET Pedestal Density (2016)
- Modelling of plasma-edge and plasma-wall interaction physics at JET with the metallic first-wall (2016)
- Modelling of the JET DT Experiments in Carbon and ITER-like Wall Configurations (2016)
- High performance detectors for upgraded gamma ray diagnostics for JET DT campaigns (2016)
- Uncertainty and correlation analysis of lead nuclear data on reactor parameters for the European Lead Cooled Training Reactor (2015)
- Benchmark selection methodology for reactor calculations and nuclear data uncertainty reduction (2015)
- The impact of poloidal asymmetries on tungsten transport in the core of JET H-mode plasmas (2015)
- Discriminating the trapped electron modes contribution in density fluctuation spectra (2015)
- Turbulent transport analysis of JET H-mode and hybrid plasmas using QuaLiKiz and Trapped Gyro Landau Fluid (2015)
- Transport analysis and modelling of the evolution of hollow density profiles plasmas in JET and implication for ITER (2015)
- First dust study in JET with the ITER-like wall (2015)
- Experimental evaluation of stable long term operation of semiconductor magnetic sensors at ITER relevant environment (2015)
- Trapped electron mode driven electron heat transport in JET (2015)
- L to H mode transition (2015)
- WEST Physics Basis (2015)
- Beryllium migration in JET ITER-like wall plasmas (2015)
- Experimental Validation of a Filament Transport Model in Turbulent Magnetized Plasmas (2015)
- Improved confinement in JET high beta plasmas with an ITER-like wall (2015)
- Influence of the E X B drift in high recycling divertors on target asymmetries (2015)
- The merits of ion cyclotron resonance heating schemes for sawtooth control in tokamak plasmas (2015)
- The global build-up to intrinsic edge localized mode bursts seen in divertor full flux loops in JET (2015)
- Free boundary equilibrium in 3D tokamaks with toroidal rotation (2015)
- Robust regression with CUDA and its application to plasma reflectometry (2015)
- Three-dimensional non-linear magnetohydrodynamic modeling of massive gas injection triggered disruptions in JET (2015)
- Key impact of finite-beta and fast ions in core and edge tokamak regions for the transition to advanced scenarios (2015)
- JET and COMPASS asymmetrical disruptions (2015)
- Conceptual Design Of The Mechanical Tritium Pumping System For Jet Dte2 (2015)
- Ion target impact energy during Type I edge localized modes in JET ITER-like Wall (2015)
- Incorporating Experimental Information in the Total Monte Carlo Methodology Using File Weights (2015)
- Comparative analysis of core heat transport of JET high density H-mode plasmas in carbon wall and ITER-like wall (2015)
- Radiation asymmetries during the thermal quench of massive gas injection disruptions in JET (2015)
- Plasma isotopic changeover experiments in JET under carbon and ITER-like wall conditions (2015)
- Inferring divertor plasma properties from hydrogen Balmer and Paschen series spectroscopy in JET-ILW (2015)
- Pedestal confinement and stability in JET-ILW ELMy H-modes (2015)
- Determination of tungsten and molybdenum concentrations from an x-ray range spectrum in JET with the ITER-like wall configuration (2015)
- Experiments and Theoretical Data for Studying the Impact of Fission Yield Uncertainties on the Nuclear Fuel Cycle with TALYS/GEF and the Total Monte Carlo Method (2015)
- Runaway electron beam generation and mitigation during disruptions at JET-ILW (2015)
- Overview of the JET results (2015)
- The effects of impurities and core pressure on pedestal stability in Joint European Torus (JET) (2015)
- WALLDYN simulations of global impurity migration in JET and extrapolations to ITER (2015)
- On the interpretation of high-resolution x-ray spectra from JET with an ITER-like wall (2015)
- Measurements of fusion neutron yields by neutron activation technique (2015)
- Integrated core-SOL-divertor modelling for ITER including impurity (2015)
- Combining Total Monte Carlo and Benchmarks for Nuclear Data Uncertainty Propagation on a Lead Fast Reactor's Safety Parameters (2014)
- Neutron tomography of axially symmetric objects using 14 MeV neutrons from a portable neutron generator (2014)
- Design and initial 1D radiography tests of the FANTOM mobile fast-neutron radiography and tomography system (2014)
- Uncertainty Study of Nuclear Model Parameters for the n+Fe-56 Reactions in the Fast Neutron Region below 20 MeV (2014)
- UO-2 Versus MOX: Propagated Nuclear Data Uncertainty for k-eff, with Burnup (2014)
- Uncertainty Propagation with Fast Monte Carlo Techniques (2014)
- Efficient use of Monte Carlo (2014)
- Total Monte Carlo evaluation for dose calculations (2014)
- Propagation of nuclear data uncertainties for ELECTRA burn-up calculations (2014)
- Evaluation of neutron spectrometer techniques for ITER using synthetic data (2013)
- Memory effect, resolution, and efficiency measurements of an Al2O3 coated plastic scintillator used for radioxenon detection (2013)
- Fast-ion distributions from third harmonic ICRF heating studied with neutron emission spectroscopy (2013)
- Correction for dynamic bias error in transmission measurements of void fraction (2012)
- Effects of surface coatings on the light collection in plastic scintillators used for radioxenon detection (2012)
- Effects of proton escape on detection efficiency in thin scintillator elements and its consequences for optimization of fast-neutron imaging (2011)
- Investigations of surface coatings to reduce memory effect in plastic scintillator detectors used for radioxenon detection (2011)
- Light-ion Production from a Thin Silicon Target Bombarded by 175 MeV Quasi Mono-energetic Neutrons (2011)
- Characterization of ANITA and QMN Neutron Beams at TSL Using Proton Recoil Techniques (2011)
Konferenser
- Addressing Model Inadequacy In Fuel Performance Model Calibration Using Mh-Within-Gibbs Sampling (2024)
- Calibration of Fuel Performance Modelling Using Metropolis-Hastings-Within-Gibbs (2024)
- A Time-Dependent Neural Network As A Surrogate For Fuel Performance Modeling (2024)
- Predicting Decay Heat By Combining Fuel Parameters With Gamma And Neutron Data Using Machine Learning (2024)
- Surrogate Modeling with Derivative Prediction for Implementation in Inverse Uncertainty Quantification Methods for Fuel Performance Modeling (2023)
- Integral adjustment and fine structure treatment for fusion evaluations (2023)
- Decay heat predictions using gamma spectroscopy and neutron coincidence data (2023)
- Propagation of F-19 Uncertainties in Molten Salt Reactors (2023)
- Nuclear Data Uncertainty Quantificationfor Reactor Physics Parameters inFluorine-19-based Molten Salt Reactors (2023)
- Addressing Model Inadequacy in Inverse Uncertainty Quantification for Fuel Performance Modeling by using a Hierarchical Statistical Formulation (2022)
- A TALYS based evaluation system for the fast energy range (2022)
- Rossi-Alpha Distribution Analysis of DDSI Data For Spent Nuclear Fuel Investigation (2022)
- CaNel - Calibration of Nuclear fuel performance codes (2021)
- Gaussian Processes for treatment of model defects (2021)
- Etik på Civilingenjörsprogrammet i Energisystem (2021)
- Gaussian Processes for treatment of model defects in nuclear data evaluations (2021)
- Using Gaussian processes to treat model defects in support of nuclear data evaluation (2021)
- Using Gaussian Processes for the evaluation of Fe-56 (2021)
- Progress on evaluation of Fe 56 (2021)
- UU progress and plans in WP4- Task 4.1.2 (2021)
- Evaluating Peak Area Uncertainties in Connection to Passive Gamma Measurements of Spent Nuclear Fuel (2021)
- Nuclear data activities of the EUROfusion consortium (2020)
- Nuclear data adjustment using Bayesian inference, diagnostics for model fit and influence of model parameters (2020)
- Uppsala experience of automatic data retrieval and covariance interpretation (2020)
- New evaluation methods addressing model defects and data inconsistency (2020)
- Analysis of the Prior Nuclear Data Correlation and Its Effect on the Adjustment in Bayesian Inference (2019)
- Interfacing TALYS with a Bayesian treatment of model defects and inconsistent data (2019)
- Evaluation methods addressing model defects and data inconsistency (2019)
- The identification and treatment of unrecognized uncertainties and the impact on evaluated uncertainties – SG44 (2019)
- Model defect treatment for 56Fe (2019)
- Integral adjustment of nuclear data libraries (2019)
- Treating inconsistent data in integral adjustment using Marginal Likelihood Optimization (2019)
- Assessment of Novel Techniques for Nuclear Data Evaluation (2018)
- Molecular ND Band Spectroscopy in the Divertor Region of Nitrogen Seeded JET Discharges (2018)
- Recent ND developments and plans at UU (2018)
- Model defect treatment for 56Fe (2018)
- Justified co-variance data by treating model defects; fitting optimized energy-dependent model parameters in Fe-56 nuclear data evaluation (2018)
- TMC adjustment of nuclear data libraries using integral benchmarks (2018)
- Model defect treatment for 56Fe (2018)
- Inconsistent data and uncertainties – SG44/46 (2018)
- Monte Carlo integral adjustment of nuclear data libraries – experimental covariances and inconsistent data (2018)
- Treating inconsistent data in Monte Carlo integral adjustment using Marginal Likelihood Optimization (2018)
- Treating defects in nuclear reaction models to improve material damage parameters and their uncertainties (2017)
- Treating model defects with a Gaussian Process prior for the parameters (2017)
- Propagation of neutron-reaction uncertainties through multi-physics models of novel LWR's (2017)
- The TENDL library (2017)
- New chromium evaluation for EuroFusion (2017)
- Improved nuclear data for enhanced nuclear safety (2017)
- Propagation of nuclear data uncertainties for fusion power measurements (2017)
- Choosing Nuclear Data evaluation techniques to obtain complete and motivated covariances (2017)
- TENDL adjustments using integral benchmarks (2017)
- Adjustment of nuclear data libraries using integral benchmarks (2017)
- Covariance in Ni-59 for JEFF 3.3 (2017)
- Uncertainty analysis of Lead cross sections on reactor safety for ELECTRA (2016)
- Development Of Drag-MOC (2016)
- Propagation Of Nuclear Data Uncertainties For Fusion Power Measurements (2016)
- Fission Activities of the Nuclear Reactions Group in Uppsala (2015)
- Reducing A Priori 239Pu Nuclear Data Uncertainty In The Keff Using A Set Of Criticality Benchmarks With Different Nuclear Data Libraries (2015)
- Neutron Tomography Using Mobile Neutron Generators for Assessment of Void Distributions in Thermal Hydraulic Test Loops (2015)
- New 59Ni data including uncertainties and consequences for gas production in steel in LWR spectraNew 59Ni data including uncertainties and consequences for gas production in steel in LWR spectra (2015)
- Towards Transparent, Reproducible And Justified Nuclear Data Uncertainty Propagation For Lwr Applications (2015)
- DRAG-MOC: A tool for the study of uncertainty analysis through OpenMOC (2015)
- Nuclear Data Uncertainty Quantification for the Nuclear Fuel Cycle Using the TMC Method (2015)
- Selecting benchmarks for reactor calculations (2014)
- Light-ion production in 175 MeV neutron-induced reactions on oxygen (2011)
Rapporter
- VR contribution to PPPT nuclear data development: Evaluation of neutron cross section data in the fast energy range (2019)
- Nuclear Reaction Data and Uncertainties for Radiation Damage (2016)
- EUROfusion Report, WP JET3, Deliverable L11 (2016) (2016)
Övrigt
- Spent fuel characterization research at Uppsala University (2021)
- Status of spent fuel characterization research at Uppsala University (2021)
- Göra el av kärnavfall-En strålande idé? (2020)
- Project Summary of Ph.D. proposal: Calibration of fuel performance codes – treating modelinadequacies, nuisance parameters and unrecognized systematic uncertainties (2019)
- Justified and complete gas-production cross sections with uncertainties for Ni-59 and consequences for stainless steel in LWR spectra (2016)
- Novel nuclear data evaluation combining sampling of experimental uncertainty components and TALYS parameters (2016)
- Evaluation of the Ni-59 cross sections including thermal (n,alpha), (n,p) and complete uncertainty information (2016)
- Ni-59 cross section evaluation (2016)
- Calculation of uncertainties on DD, DT n/γ flux at potential irradiation positions (vertical ports) and KN2 – U3 by TMC code (L11) (2016)
